5853_V01 Price, Distributor, Stock

5853_V01 Distributor

Distributor

Part #

Manufacturer

Description

Price

Qty.
BuyNow

ComSIT USA

60058534

Grupo Gollet Electronics

AVAILABLE EU

303

835853B

CHUNXING

AVAILABLE EU

ComSIT USA

SI5853DDCT1E3

Vishay Intertechnologies

P-CHANNEL 20 V (D-S) MOSFET WITH SCHOTTKY DIODE Small Signal Field-Effect Transistor, 4A I(D), 1-Element, P-Channel, Metal-oxide Semiconductor FET
RoHS : Compliant

18,000

LC75853NEHSTLM

SANYO Semiconductor Co Ltd

Electronic Component
RoHS : Not Compliant

730

Avnet Abacus

58535-1

TE Connectivity

Assembly Tools Hand Tool Assymbly (Alt: 58535-1)
RoHS : Not Compliant

58535-1

TE Connectivity

Assembly Tools Hand Tool Assymbly (Alt: 58535-1)
RoHS : Not Compliant

1815853

Phoenix Contact

MSTBT 25 3ST BKBDWH4446Q MSTBT253STBKBDWH4446Q (Alt: 1815853)
RoHS : Compliant

58537-1

TE Connectivity

(Alt: 58537-1)
RoHS : Not Compliant

1845853

Phoenix Contact

MDSTBVA 25 9G MDSTBVA259G (Alt: 1845853)
RoHS : Compliant

786585-3

TE Connectivity

(Alt: 786585-3)
RoHS : Compliant

1658539-3

TE Connectivity

Contact PIN Crimp ST Cable Mount Loose Piece (Alt: 1658539-3)
RoHS : Compliant

1658539-3

TE Connectivity

Contact PIN Crimp ST Cable Mount Loose Piece (Alt: 1658539-3)
RoHS : Compliant

1658538-1

TE Connectivity

Contact SKT Crimp ST Cable Mount Loose Piece (Alt: 1658538-1)
RoHS : Compliant

1658538-1

TE Connectivity

Contact SKT Crimp ST Cable Mount Loose Piece (Alt: 1658538-1)
RoHS : Compliant

1658537-5

TE Connectivity

Contact SKT Crimp ST Cable Mount Strip (Alt: 1658537-5)
RoHS : Compliant

1658537-5

TE Connectivity

Contact SKT Crimp ST Cable Mount Strip (Alt: 1658537-5)
RoHS : Compliant

1658537-1

TE Connectivity

Contact SKT Crimp ST Cable Mount Strip (Alt: 1658537-1)
RoHS : Compliant

1658537-1

TE Connectivity

Contact SKT Crimp ST Cable Mount Strip (Alt: 1658537-1)
RoHS : Compliant

75853-411LF

Amphenol Corporation

Conn DIN 41612 RCP 21 POS 254mm IDT ST Cable Mount Tray (Alt: 75853-411LF)
RoHS : Compliant

Avnet Asia

2315853-2

TE Connectivity

(Alt: 2315853-2)
RoHS : Compliant

2315853-4

TE Connectivity

(Alt: 2315853-4)
RoHS : Compliant

C58-533727-41S

Amphenol Corporation

(Alt: C58-533727-41S)
RoHS : Compliant

1658537-5

TE Connectivity

(Alt: 1658537-5)
RoHS : Compliant

EBV Elektronik

TSL25853P

ams OSRAM Group

(Alt: Q65114A1301)
RoHS : Compliant

TSL25853PM

ams OSRAM Group

Light to Digital Ambient Sensor DigitalOUT 1mlux 6Pin OLGA TR (Alt: Q65114A1302)
RoHS : Compliant

82634CRAPRTFC 958536

Intel Corporation

(Alt: 958536)
RoHS : Compliant

FDH Electronics

ALPHA 5853-VLT

Alpha Wire

Wire and Cable

1 : $0.233
5 : $0.233
10 : $0.233
25 : $0.233
50 : $0.233
100 : $0.233
250 : $0.233
500 : $0.198
1,000 : $0.169
2,500 : $0.163
10,000 : $0.158

7,890

ALPHA 5853-ORG

Alpha Wire

Wire and Cable

7,300

ALPHA 5853-BRN

Alpha Wire

Wire and Cable

6,150

ALPHA 5853/19-9

Alpha Wire

Wire and Cable

1,900

ALPHA 5853/19-6

Alpha Wire

Wire and Cable

1,200

ALPHA 5853/19-3

Alpha Wire

Wire and Cable

1 : $1.742
5 : $1.742
10 : $1.742
25 : $1.742
50 : $1.742
100 : $1.742
250 : $1.742
500 : $1.482
1,000 : $1.267
2,500 : $1.222
10,000 : $1.181

800

ALPHA 5853/19-2

Alpha Wire

Wire and Cable

600

ALPHA 5853-GRN

Alpha Wire

Hook-Up Wire

1 : $0.3
5 : $0.3
10 : $0.3
25 : $0.3
50 : $0.3
100 : $0.3
250 : $0.3
500 : $0.255
1,000 : $0.218
2,500 : $0.211
10,000 : $0.203

595

ALPHA 5853-GRY

Alpha Wire

Wire and Cable

500

ALPHA 5853/19-4

Alpha Wire

Wire and Cable

200

ALPHA 5853/19-7

Alpha Wire

Wire and Cable

100

ALPHA 5853-BLU

Alpha Wire

Wire and Cable

100

6659585-3 REV H

Cable Assembly

6659585-3 REV G

Cable Assembly

1 : $337.726
5 : $337.726
10 : $310.157
25 : $266.626
50 : $266.626
100 : $257.588
250 : $249.142
500 : $249.142
1,000 : $249.142
2,500 : $249.142
10,000 : $249.142

F7-578558-53J

Amphenol Aerospace

Connector 38999

Flip Electronics

BCM58535BA1KF14G

Broadcom Limited

Stock, Ship Today

1 : $13.42

264

Master Electronics

1658539-3

TE Connectivity

PIN CONT DUPL PLT LP HD-20 AMP
RoHS : Compliant

40,000 : $0.2189
30,000 : $0.2194
20,000 : $0.2199
10,000 : $0.2205
8,000 : $0.2296
5,000 : $0.2302
3,000 : $0.2322
1,000 : $0.2542

17,720

5853-RD005

Alpha Wire

Hook-up Wire 26AWG 1.09mm Silver Plated Copper 600VAC - 30.48m (100ft)/Spool
RoHS : Compliant

100 : $105.95
50 : $107.36
20 : $110.3
10 : $115.03
5 : $120.18
1 : $129.87

5853-BLUE-100

Alpha Wire

Hook-up Wire 26AWG 1.02mm Silver Plated Copper - Blue - 600V - 30.48m (100ft)/Spool
RoHS : Compliant

100 : $103.87
50 : $105.26
20 : $108.14
10 : $112.77
5 : $117.82
1 : $127.33

5853-GREEN-100

Alpha Wire

Hook-up Wire 26AWG 1.02mm Silver Plated Copper- Green - 600V - 30.48m (100ft)/Spool
RoHS : Compliant

100 : $105.95
50 : $107.36
20 : $110.3
10 : $115.03
5 : $120.18
1 : $129.87

5853-YELLOW-100

Alpha Wire

Hook-up Wire 26AWG 1.02mm Silver Plated Copper - Yellow - 600V - 30.48m (100ft)/Spool
RoHS : Compliant

100 : $105.95
50 : $107.36
20 : $110.3
10 : $115.03
5 : $120.18
1 : $129.87

025-8531-100

ITT Interconnect Solutions

RoHS : Compliant

26 : $34.91
20 : $35.63
13 : $39.15
7 : $48.47

5853/19-OR001

Alpha Wire

Hook-up Wire 26AWG 304.8m 1.09mm Silver Plated Copper - Orange - 600VAC - 304.8m (1000ft)/Spool
RoHS : Compliant

5 : $875.9
3 : $899.9
1 : $912.39

100P2585-37-1-C

TE Connectivity

TE Connectivity 100P2585-37-1-C
RoHS : Compliant

35 : $424.11
12 : $442.56
3 : $461.0
2 : $480.2
1 : $501.09

CAT-458537-2

Samtec Inc

CAT TOOLING
RoHS : Compliant

100 : $67.13
50 : $68.03
20 : $69.89
10 : $73.94
5 : $76.15
1 : $82.29

9505853

APEM Inc

Navimec With Caps With Bordeaux/ Light Grey But.
RoHS : Compliant

500 : $45.26
375 : $46.18
250 : $67.85
125 : $132.84

202B585-3-0

TE Connectivity

202B585-3-0 MOQ Reduction
RoHS : Compliant

725 : $59.39
544 : $60.6
363 : $88.95
182 : $173.67

155585-3130

ITT Interconnect Solutions

RoHS : Compliant

25 : $218.01
19 : $222.46
13 : $308.02
7 : $540.27

1585355-2

TE Connectivity

SCANNER BAR CODE HIGH RES
RoHS : Compliant

5 : $8,605.35
3 : $8,626.91
1 : $8,738.95

1095853

Phoenix Contact

Sensor/actuator cable - 5-position - PVC - gray - shielded - free cable end - on Socket angled M12 - A-coded - cable length: 20 m - Foil shielding plus drain wire
RoHS : Compliant

10 : $46.63
1 : $48.07

1-459585-3

TE Connectivity

CRIMPER AMPLIVAR SPLCE(BLUNTF)
RoHS : Not Compliant

5 : $448.97
3 : $478.9
1 : $615.49

Pasternack Enterprises US

PE3W11585-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG141A/U, RF Cable Type: RG141A/U, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to SMA Female Cable 36 Inch Length Using RG141 Coax., Radio frequency assembly N male to SMA female cable 36 inch length using RG141 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to SMA female cable 36 inch length using RG141 coax, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our type N to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3W11585-36 can also be known as a type N plug to SMA jack cable assembly and will be shipped same-day as it is purchased. N type plug to SMA jack cable assembly PE3W11585-36 is built with RG141A/U which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10 GHz maximum frequency type N male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11585-36 can also be used in the other direction and will be SMA female to type N male cable assembly if the opposite connectivity is required. N type plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SMA female cable 36 inch length using RG141 coax.

1 : $132.99
25 : $126.34
50 : $119.69
100 : $114.37

PE3C7585-36

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 36 inches. Blue FAKRA Jack to MCX Plug Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly blue FAKRA jack to MCX plug cable 36 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Blue FAKRA jack to MCX plug cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FAKRA cable connection on one end and MCX cable connection on the other. Our FAKRA to MCX cable assemblies have a jack gender on end 1 and plug on end 2. This FAKRA to MCX cable is a jack to plug coax assembly, PE3C7585-36, can also be known as a FAKRA female to MCX male cable assembly and will be shipped same-day as it is purchased. FAKRA female to MCX male cable assembly PE3C7585-36 is built with RG316 which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency FAKRA jack to MCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7585-36 can also be used in the other direction and will be MCX plug to FAKRA jack cable assembly if the opposite connectivity is required. FAKRA female to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to MCX cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this blue FAKRA jack to MCX plug cable 36 inch length using RG316 coax.

1 : $62.09
25 : $58.99
50 : $55.88
100 : $53.4

PE3585-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to HN Male Cable 36 Inch Length Using RG214 Coax., Radio frequency assembly N male to HN male cable 36 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to HN male cable 36 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to HN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and HN cable connection on the other. Our type N to HN cable assemblies have a male gender on end 1 and male on end 2. PE3585-36 can also be known as a type N plug to HN plug cable assembly and will be shipped same-day as it is purchased. N type plug to HN plug cable assembly PE3585-36 is built with RG214 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to HN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency type N male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3585-36 can also be used in the other direction and will be HN male to type N male cable assembly if the opposite connectivity is required. N type plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to HN cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to HN male cable 36 inch length using RG214 coax.

1 : $226.99
25 : $215.64
50 : $204.29
100 : $195.21

PE3W04585-36

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to BNC Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240-UF Coax., Radio frequency assembly N male to BNC male right angle low loss cable 36 inch length using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to BNC male right angle low loss cable 36 inch length using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle BNC cable connection on the other. Our low loss type N to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This type N to BNC cable is a male to male coax assembly, PE3W04585-36, can also be known as a low loss type N plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to BNC plug cable assembly PE3W04585-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency type N male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04585-36 can also be used in the other direction and will be right angle BNC male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to BNC male right angle low loss cable 36 inch length using LMR-240-UF coax.

1 : $101.99
25 : $96.89
50 : $91.79
100 : $87.71

PE3W25853

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. Mini UHF Male to N Male Cable Using LMR-400 Coax. PE3W25853 is a Mini UHF male to N male cable using LMR-400 coax. This Pasternack Mini UHF male to N male cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm N for connector 2. Our male Mini UHF to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25853 Mini UHF male to N male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

PE45853

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SHV, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 300 MHz, Interface Type 1: RG59B/U. SHV Jack Connector Crimp/Solder Attachment for RG59B/U. PE45853 SHV jack coaxial connector has an interface type of SHV jack which is compatible with RG59B/U cables and has an impedance of 50 Ohms. Pasternack's SHV jack connector uses crimp/solder as an attachment method. Our jack SHV coaxial connector provides a maximum frequency of 300 MHz. This SHV jack RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack SHV jack coaxial connector has a teflon dielectric type. Pasternack's SHV coaxial connector has a brass body with tinned copper plating. Our PE45853 SHV connector uses agold over nickel over copper-plated brass contact.The Pasternack RF connector block has a maximum inner conductor and outer conductor resistance of 2 mOhms and 1.5 mOhms respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The PE45853 SHV connector operates at a temperature range of -65 to 165 deg C. This SHV connector has a gold over nickel over copper inner contact plating. The Pasternack SHV jack connector has a maximum operating voltage of 3,500 Vrms and a dielectric withstanding voltage of 5,000 Vrms. Our SHV jack connector has a length of 1.82 inches, a width of 0.43 inches, and a weight of 0.048 lbs. This Pasternack jack SHV connector will ship the same business day as purchased. Our SHV jack connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $58.89
25 : $55.95
50 : $53.0
100 : $50.65

PE34585-36

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 36 inches. UHF Male to BNC Male Cable 36 Inch Length Using RG393 Coax., Radio frequency assembly UHF male to BNC male cable 36 inch length using RG393 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. UHF male to BNC male cable 36 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UHF to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with UHF cable connection on one end and BNC cable connection on the other. Our UHF to BNC cable assemblies have a male gender on end 1 and male on end 2. This UHF to BNC cable is a male to male coax assembly, PE34585-36, can also be known as a UHF plug to BNC plug cable assembly and will be shipped same-day as it is purchased. UHF plug to BNC plug cable assembly PE34585-36 is built with RG393 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency UHF male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34585-36 can also be used in the other direction and will be BNC male to UHF male cable assembly if the opposite connectivity is required. UHF plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UHF to BNC cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UHF male to BNC male cable 36 inch length using RG393 coax.

1 : $139.99
25 : $132.99
50 : $125.99

PE3W25853LF

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. Mini UHF Male to N Male Cable Using LMR-400 Coax, LF Solder. PE3W25853LF is a Mini UHF male to N male cable using LMR-400 coax. This Pasternack Mini UHF male to N male cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm N for connector 2. Our male Mini UHF to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25853LF Mini UHF male to N male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3MSA00585-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: JACK, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: JACK, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. LSZH TRB Jack to TRB Jack 1553 Cable 36 Inch Length Using 78 Ohm TWCH-78-2 Coax., Radio frequency assembly LSZH TRB jack to TRB jack 1553 cable 36 inch length using 78 Ohm TWCH-78-2 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The LSZH TRB jack to TRB jack 1553 cable 36 inch length using 78 Ohm TWCH-78-2 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MSA00585-36 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MSA00585-36 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this LSZH TRB jack to TRB jack 1553 cable 36 inch length using 78 Ohm TWCH-78-2 coax.

1 : $365.99
25 : $347.69
50 : $329.39
100 : $314.75

PE3W13585-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 4.3-10 Male to N Male Low PIM Cable 36 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 4.3-10 male to N male low PIM cable 36 inch length using 1/4 inch superflexible coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to N male low PIM cable 36 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM 4.3-10 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W13585-36 can also be known as a low PIM 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13585-36 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 120 dB. Our 4.3-10 male to type N male cable has a maximum VSWR of 1.265:1. 4.3-10 plug to type N plug cable assembly PE3W13585-36 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a brass body with tri-metal plating, while the other has the clamp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W13585-36 can also be used in the other direction and will be a type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements.

1 : $216.99
10 : $208.31
25 : $199.63
100 : $190.95