580-SM1-R Price, Distributor, Stock

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 12 inches. UHF Male to UHF Male Cable 12 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly UHF male to UHF male cable 12 inch length using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. UHF male to UHF male cable 12 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UHF to UHF cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with UHF cable connection on one end and UHF cable connection on the other. Our UHF to UHF cable assemblies have a male gender on end 1 and male on end 2. This UHF to UHF cable is a male to male coax assembly, PE3580-12, can also be known as a UHF plug to UHF plug cable assembly and will be shipped same-day as it is purchased. UHF plug to UHF plug cable assembly PE3580-12 is built with RG59 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this UHF male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. UHF plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UHF male to UHF male cable 12 inch length using 75 Ohm RG59 coax.

1 : $41.99
25 : $39.89
50 : $37.79
100 : $36.11

3,233

PE3580-60

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 60 inches. UHF Male to UHF Male Cable 60 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly UHF male to UHF male cable 60 inch length using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. UHF male to UHF male cable 60 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UHF to UHF cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with UHF cable connection on one end and UHF cable connection on the other. Our UHF to UHF cable assemblies have a male gender on end 1 and male on end 2. This UHF to UHF cable is a male to male coax assembly, PE3580-60, can also be known as a UHF plug to UHF plug cable assembly and will be shipped same-day as it is purchased. UHF plug to UHF plug cable assembly PE3580-60 is built with RG59 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this UHF male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. UHF plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UHF male to UHF male cable 60 inch length using 75 Ohm RG59 coax.

1 : $47.59
25 : $45.21
50 : $42.83
100 : $40.93

697

PE3W01580-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female to SMA Female Cable 36 Inch Length Using Tinned RG402 Coax., Radio frequency assembly SMA female to SMA female cable 36 inch length using tinned RG402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to SMA female cable 36 inch length using tinned RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a female gender on end 1 and a female on end 2. PE3W01580-36 can also be known as a SMA jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. The semi-rigid RF cable has an in-series connection. Our SMA female to SMA female cable has a maximum VSWR of 1.4:1. SMA jack to SMA jack cable assembly PE3W01580-36 is built with RG402 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA jack to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15

PE7580-50

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 50 dB, Attenuation Accuracy, Typ: 1.2 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 50 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-50 is a 50 dB fixed attenuator from Pasternack. This 50 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-50 fixed attenuator is available with a typical attenuation accuracy of 1.2 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 50 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 50 dB. The Pasternack PE7580-50 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 50 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-50 will ship the same business day as purchased from Pasternack’s production facility. This 50 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $517.99
5 : $507.63
10 : $497.27
25 : $486.91

PE7580-3

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 3 dB, Attenuation Accuracy, Typ: 0.7 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-3 is a 3 dB fixed attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-3 fixed attenuator is available with a typical attenuation accuracy of 0.7 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 3 dB. The Pasternack PE7580-3 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 3 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-3 will ship the same business day as purchased from Pasternack’s production facility. This 3 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $387.99
5 : $380.23
10 : $372.47
25 : $364.71

PE7580-10

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 0.8 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-10 is a 10 dB fixed attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-10 fixed attenuator is available with a typical attenuation accuracy of 0.8 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7580-10 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 10 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $387.99
5 : $380.23
10 : $372.47
25 : $364.71

PE3W15809

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to SMA Male Right Angle Cable Using LMR-240 Coax. PE3W15809 is a 7/16 DIN male right angle to SMA male right angle cable using LMR-240 coax. This Pasternack 7/16 DIN male right angle to SMA male right angle cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm SMA for connector 2. 7/16 DIN right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 7/16 DIN right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15809 7/16 DIN male right angle to SMA male right angle cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W25805/HS

Pasternack Enterprises

PE3MSA00580-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Lead Free LSZH Bend Relief 3-Slot TRB Plug to Plug for 78 Ohm TWCH-78-2, 12" Cable., Radio frequency assembly lead free LSZH bend relief 3-Slot TRB plug to plug for 78 Ohm TWCH-78-2, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free LSZH bend relief 3-Slot TRB plug to plug for 78 Ohm TWCH-78-2, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and plug on end 2. PE3MSA00580-12 can also be known as a 1553 TRB male to TRB male cable assembly and will be shipped same-day as it is purchased. TRB male to TRB male cable assembly PE3MSA00580-12 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB male to TRB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free LSZH bend relief 3-Slot TRB plug to plug for 78 Ohm TWCH-78-2, 12" cable.

1 : $323.99
25 : $307.79
50 : $291.59
100 : $278.63

PE3C5805

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P141, RF Cable Type: PE-P141, RF Cable Impedance: 50 Ohm. N Male to SMA Male Cable Using PE-P141 Coax., Radio frequency assembly N male to SMA male cable using PE-P141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to SMA male cable using PE-P141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5805, can also be known as a type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3C5805 is built with PE-P141 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5805 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SMA male cable using PE-P141 coax.

PE3W25580LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-FR, RF Cable Type: LMR-400-FR, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Female Bulkhead Cable Using LMR-400-FR Coax with HeatShrink, LF Solder. PE3W25580LF/HS is a N male right angle to N female bulkhead cable using LMR-400-FR coax. This Pasternack N male right angle to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25580LF/HS N male right angle to N female bulkhead cable assembly is constructed with LMR-400-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE33580LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50. SMC Plug to SMC Jack Bulkhead Cable Using RG174 Coax, RoHS. PE33580LF is a SMC plug to SMC jack bulkhead cable using RG174 coax. This Pasternack SMC plug to SMC jack bulkhead cable assembly uses a 50 Ohm SMC for connector 1 and a 50 Ohm SMC for connector 2. Our plug SMC to jack SMC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33580LF SMC plug to SMC jack bulkhead cable assembly is constructed with RG174 coax and the maximum VSWR is 1.4:1.

PE3C5802LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. N Male to Straight Cut Lead Cable Using RG213 Coax, LF Solder., Radio frequency assembly N male to straight cut lead cable using RG213 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to straight cut lead cable using RG213 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and straight cut lead cable connection on the other. Our N type to straight cut lead cable assemblies have a male gender on end 1 and sexless on end 2. This type N to straight cut lead cable is a male to sexless coax assembly, PE3C5802LF, can also be known as a N type plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. Type N plug to straight cut lead sexless cable assembly PE3C5802LF is built with RG213 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5802LF can also be used in the other direction and will be straight cut lead sexless to N type male cable assembly if the opposite connectivity is required. N type plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to straight cut lead cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to straight cut lead cable using RG213 coax, LF solder.

PE3W03580LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to SMB Plug Cable Using LMR-100 Coax, LF Solder. PE3W03580LF is a SMA male to SMB plug cable using LMR-100A coax. This Pasternack SMA male to SMB plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. Our male SMA to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03580LF SMA male to SMB plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

Teledyne HiRel

5962-90658043A

Teledyne HiRel

PROM, UV ERASABLE, 4K X 8, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-9758001QFA

Teledyne HiRel

FLIP-FLOP, JK, DUAL
RoHS : Not Compliant

7705801FA

Teledyne HiRel

BINARY COUNTER, 12-BIT
RoHS : Not Compliant

5962-9065802JC

Teledyne HiRel

PROM, UV ERASABLE, 4K X 8, 55 NS ACCESS TIME

5962-8965801RA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9065802KA

Teledyne HiRel

PROM, UV ERASABLE, 4K X 8, 55 NS ACCESS TIME
RoHS : Not Compliant

5962-9065801LC

Teledyne HiRel

PROM, UV ERASABLE, 4K X 8, 70 NS ACCESS TIME

5962-9065804KA

Teledyne HiRel

PROM, UV ERASABLE, 4K X 8, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-9065804LC

Teledyne HiRel

PROM, UV ERASABLE, 4K X 8, 35 NS ACCESS TIME

5962-8775801SA

Teledyne HiRel

BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, WITH 3-STATE INPUTS/OUTPUTS
RoHS : Not Compliant

5962-8775801RA

Teledyne HiRel

BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, WITH 3-STATE INPUTS/OUTPUTS
RoHS : Not Compliant

5962-9065804KC

Teledyne HiRel

PROM, UV ERASABLE, 4K X 8, 35 NS ACCESS TIME

5962-89558013A

Teledyne HiRel

TRANSCEIVER/REGISTER, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-89658012A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9065801JA

Teledyne HiRel

PROM, UV ERASABLE, 4K X 8, 70 NS ACCESS TIME
RoHS : Not Compliant

Venkel Ltd.

PWCR0805-TL-1580DT

VENKEL LTD

Pulse Withstanding CR;0805;1/4W;�200PPM;158R;�0.5%
RoHS : Compliant

PWCR2010-WK-1580DT

VENKEL LTD

Pulse Withstanding CR;2010;3/4W;�100PPM;158R;�0.5%
RoHS : Compliant

HPTF1206-UE-1580FT

VENKEL LTD

High Power Thin Film CR;1206;1/3W;�25PPM;158R;�1%
RoHS : Compliant

HPTF2010-UC-1580FT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�50PPM;158R;�1%
RoHS : Compliant

HPTF2512-WE-1580UT

VENKEL LTD

High Power Thin Film CR;2512;3/4W;�25PPM;158R;�0.01%
RoHS : Compliant

TFCR0402-16W-K-4580CT

VENKEL LTD

Thin Film CR;0402;1/16W;�100PPM;458R;�0.25%
RoHS : Compliant

TFCR0603-10W-K-2580BT

VENKEL LTD

Thin Film CR;0603;1/10W;�100PPM;258R;�0.1%
RoHS : Compliant

TFCR0603-16W-C-2580CT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�50PPM;258R;�0.25%
RoHS : Compliant

TFCR0603-16W-K-1580DT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�100PPM;158R;�0.5%
RoHS : Compliant

TFCR0603-16W-K-4580DT

VENKEL LTD

Thin Film CR;0603;1/16W;�100PPM;458R;�0.5%
RoHS : Compliant

TFCR0805-10W-C-1580BT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;158R;�0.1%
RoHS : Compliant

TFCR0805-10W-E-4580FT

VENKEL LTD

Thin Film CR;0805;1/10W;�25PPM;458R;�1%
RoHS : Compliant

TFCR0805-8W-C-4580DT-1K

VENKEL LTD

Thin Film CR;0805;1/8W;�50PPM;458R;�0.5%
RoHS : Compliant

TFCR0805-8W-E-1580CT-1K

VENKEL LTD

Thin Film CR;0805;1/8W;�25PPM;158R;�0.25%
RoHS : Compliant

TFCR0805-8W-E-2580FT-1K

VENKEL LTD

Thin Film CR;0805;1/8W;�25PPM;258R;�1%
RoHS : Compliant

Vyrian

75915-807HLF

Amphenol Communications Solutions

Board Connector, 7 Contact(s), 1 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Grey Insulator, Receptacle

13,525

1927580

Phoenix Contact

Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s)
RoHS : Compliant

11,578

1846580

Phoenix Contact

Strip Terminal Block, 10A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

11,027

LMH6580VSX

Texas Instruments

Cross Point Switch, 1 Func, 8 Channel, PQFP48

9,769

1745807

Phoenix Contact

Barrier Strip Terminal Block, 16A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

9,740

AD7580KN

Analog Devices Inc

ADC, Successive Approximation, 10-Bit, 1 Func, 2 Channel, Parallel, 8 Bits Access, CMOS, PDIP24
RoHS : Not Compliant

8,848

R5580503FNA

Texas Instruments

8,189

5962-9205802QUA

Texas Instruments

7,708

AD580KCHIPS

Analog Devices Inc

7,366

1525801

Phoenix Contact

Cable Assembly, 4 Conductor(s), 18AWG, 250V, Power Cable
RoHS : Compliant

6,227

AFBR5803A2

Broadcom Limited

5,402

AD1580BRT-R2

Analog Devices Inc

Two Terminal Voltage Reference, 1 Output, 1.225V, BIPolar, PDSO3
RoHS : Not Compliant

5,113

BCM87580A0KFEBG

Broadcom Limited

4,020

AFBR-5805ATZ

Broadcom Limited

Transceiver, 1270nm Min, 1380nm Max, ST Connector, Panel Mount
RoHS : Compliant

3,511

R143.258.000

Radiall

RF TNC Connector, Female, Panel Mount, Cable And Panel Mount, Clamp Terminal, Jack
RoHS : Compliant

744

Waytek, Inc.

12124580

Aptiv PLC

Weather Pack Female Reel Terminal 16-14GA #12124580 2200/Reel
RoHS : Compliant

2,200 : $0.0864
11,000 : $0.0737

224,400

55808701

Southwire Company LLC

12/3 SJOOW Service Cord Black White Green Conductors -40C to 90C UL/CSA 300V

250 : $1.7159
2,500 : $1.5001

14,500

7000005801

3M IDC Terminal T-Tap Red 22 To 18 Ga MATE WITH 30512 OR 30712

50 : $0.2155
200 : $0.2039
500 : $0.1895
1,000 : $0.1818

10,410

7000005800

IDC Terminal Splice Tap Red 22 TO 18 GA ALT PRODUCT PN 31575

20 : $0.7256
50 : $0.6763
100 : $0.6443
200 : $0.6182
500 : $0.5805
1,000 : $0.5544

6,581

7000005802

3M IDC Terminal T-TAP Yellow 12 GA MATE WITH 32514 OR 32714

50 : $0.2652
200 : $0.251
500 : $0.2332
1,000 : $0.2238

5,727

55809706

Southwire Company LLC

10/3 SOOW Service Cord Black White Green Conductors -40C to 90C UL/CSA 600V

250 : $3.0102
2,500 : $2.6317

3,500

12045808

Aptiv PLC

Metri-Pack 10 Pin Connector Male body #12045808 150 series
RoHS : Compliant

10 : $1.0106
50 : $0.9136
100 : $0.7275
200 : $0.7125
500 : $0.7125
1,000 : $0.6606

2,321

55809906

Southwire Company LLC

14/3 SOOW Service Cord Black White Green Conductors -40C to 90C UL/CSA 600V

250 : $1.5808
2,500 : $1.382

2,250

55808501

Southwire Company LLC

16/3 SJOOW Service Cord Black White Green Conductors -40C to 90C UL/CSA 300V

250 : $0.9636
2,500 : $0.8423

2,000

55809506

Southwire Company LLC

12/4 SOOW Service Cord Blk Wht Grn Rd Conductors disc way, no repl

250 : $2.6503
2,500 : $2.317

1,750

1924580-2

TE Connectivity

AmpSeal 16, 18-20GA Socket (Female) Contact
RoHS : Compliant

15 : $0.7487
50 : $0.7214
100 : $0.698
200 : $0.6629
500 : $0.6395
1,000 : $0.6161

1,130

58027-11

Littelfuse Inc

Cole Hersee 58027-11 sealed rocker switch is a DPDT momentary (On)-Off-(On) switch rated 15A at 24VDC. It features a black rectangular actuator, no illumination, IP66 water resistance, and (6) 1/4" blade terminals for heavy-duty panel switching.

1 : $24.62
10 : $21.98
50 : $20.22
100 : $19.45
200 : $18.9
500 : $18.35

161

58027-01

Littelfuse Inc

Cole Hersee 58027-01 sealed rocker switch is an SPST On-Off switch rated 15A at 24VDC. It features a black rectangular actuator, no illumination, IP66 water resistance, and two 1/4" blade terminals for compact panel-mounted control.

1 : $15.48
10 : $13.82
50 : $12.71
100 : $12.3
200 : $11.89
500 : $11.54

123

7000031580

3M 7000031580 Scotch Vinyl Electrical Tape 35 is brown professional-grade 3/4" x 66' tape with 7 mil thickness and a 600VDC rating. Rated from -14F to 176F, it is flame retardant, stretches to conform around irregular shapes, and resists UV, abrasion, moisture, and solvents.

1 : $12.88
10 : $11.65
50 : $10.68
100 : $10.29
200 : $10.03
500 : $9.71

55809406

Southwire Company LLC

12/3 SOOW Service Cord Black White Green Conductors -40C to 90C UL/CSA 600V

250 : $2.1703
2,500 : $1.8973

Win Source Electronics

ISL95808HRZ-T

Intersil Corporation

High Voltage Synchronous Rectified Buck MOSFET Driver / MOSFET DRIVER 8DFN
RoHS : Compliant

805 : $0.3728
645 : $0.3879
500 : $0.4031
350 : $0.4334
225 : $0.4485
105 : $0.4788

420,000

TAS5805MPWP

Texas Instruments

IC AMP D MONO/STER 45W 28HTSSOP
RoHS : Compliant

410 : $0.7399
325 : $0.77
250 : $0.8
175 : $0.8602
115 : $0.8903
55 : $0.9504

90,822

AD1580ART-REEL7

Analog Devices Inc

IC VREF SHUNT 1.225V SOT23
RoHS : Not Compliant

146 : $2.0597
109 : $2.2974
85 : $2.3766
62 : $2.4558
40 : $2.535
17 : $3.0896

65,000

IRF5803TRPBF

Infineon Technologies AG

MOSFET P-CH 40V 3.4A 6-TSOP
RoHS : Compliant

1,610 : $0.1864
1,290 : $0.194
995 : $0.2016
695 : $0.2167
450 : $0.2243
210 : $0.2394

61,390

NJM4580V

New Japan Radio Co Ltd

DUAL OPERATIONAL AMPLIFIER　
RoHS : Compliant

2,620 : $0.1285
1,955 : $0.1432
1,515 : $0.1483
1,100 : $0.1532
710 : $0.1581
295 : $0.1926

60,000

NJM4580V(TE1)-TFB

New Japan Radio Co Ltd

2,620 : $0.1285
1,955 : $0.1432
1,515 : $0.1483
1,100 : $0.1532
710 : $0.1581
295 : $0.1926

56,930

0458005.DR

Littelfuse Inc

FUSE BRD MNT 5A 32VAC 75VDC 1206
RoHS : Compliant

565 : $0.5344
420 : $0.5961
325 : $0.6166
240 : $0.6372
155 : $0.6577
65 : $0.8016

26,862

AD1580BRTZ-R2

Analog Devices Inc

IC VREF SHUNT 1.225V SOT23
RoHS : Compliant

250 : $1.2046
190 : $1.3435
145 : $1.3899
105 : $1.4362
70 : $1.4825
30 : $1.8068

14,600

OV00580-B21G-1C

Omnivision Technologies Inc

3D bridge chip product brief

33 : $9.3182
26 : $9.697
20 : $10.0758
14 : $10.8334
9 : $11.2122
5 : $11.9697

4,862

AT91M55800A-33AU

Atmel Corporation

IC MCU 32BIT ROMLESS 176LQFP
RoHS : Compliant

11 : $29.9863
8 : $33.4462
6 : $34.5995
5 : $35.7529
3 : $36.9062
2 : $44.9794

4,135

LT3580HMS8E#TRPBF

Linear Technology

IC REG MULT CONFIG INV ADJ 8MSOP / Conv DC-DC 2.5V to 32V Inv/Step Up Single-Out 5V to 42V Automotive 8-Pin MSOP EP T/R
RoHS : Compliant

91 : $3.7222
68 : $4.1516
53 : $4.2948
38 : $4.438
25 : $4.5811
11 : $5.5832

3,060

LT1580CR-2.5#PBF

Linear Technology

IC LDO REGULATOR 7A 2.5V DDPAK-7
RoHS : Compliant

3 : $147.2638
2 : $164.2558
1 : $169.9198

1,400

RDA5807M

RDA Microelectronics

Single Chip Broadcast FM Radio Tuner

1,640 : $0.2369
1,225 : $0.2642
950 : $0.2734
690 : $0.2825
445 : $0.2915
185 : $0.3553

591

AD580SH/883B

Analog Devices Inc

High Precision, 2.5 V IC Reference
RoHS : Not Compliant

4 : $82.1053
3 : $91.579
2 : $94.7369
1 : $97.8948

546

BCM56580A0IFEBG

Broadcom Limited

2.5-GIGABIT ETHERNET MULTI-LAY / Interface

1 : $853.0271
1 : $853.0271
1 : $853.0271
1 : $853.0271
1 : $853.0271
1 : $853.0271

155

580-SM1-R Distributor

Link URL