Electronic Components Datasheet Search
  English  ▼
ALLDATASHEET.COM

X  



566U-R Distributor

DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

GLYN GmbH & Co. KG
R5F566TAEDFP#10

Renesas Electronics Corporation MCU 32-Bit RXv3 256KB Flash 160MHz 100-LFQFP
RoHS : Compliant
880

Flip Electronics
R5F566TEFGFL#30

Renesas Electronics Corporation Stock
RoHS : Compliant
8,390
R5F566TAAGFF#10

Renesas Electronics Corporation Stock
RoHS : Compliant
5,040
R5F56609BGFL#10

Renesas Electronics Corporation Stock
RoHS : Compliant
4,000
R5F566TAEDFN#30

Renesas Electronics Corporation Stock
RoHS : Compliant
3,272
R5F566TEEDFN#10

Renesas Electronics Corporation Stock
RoHS : Compliant
2,856
R5F566TABDFP#30

Renesas Electronics Corporation Stock
RoHS : Compliant
2,537
NCP5663DS18R4G

onsemi Stock, Ship Today
RoHS : Compliant
1 : $0.52
2,400
R5F56604AGFB#30

Renesas Electronics Corporation Stock
RoHS : Compliant
1,523
R5F56604AGFM#30

Renesas Electronics Corporation Stock
RoHS : Compliant
556
R5F56604CGFB#30

Renesas Electronics Corporation Stock
RoHS : Compliant
537
CY8C29566-24AXIT

Infineon Technologies AG Stock
RoHS : Compliant
276
R5F566TKCDFP#30

Renesas Electronics Corporation Stock
RoHS : Compliant
258
R5F56609BDFM#30

Renesas Electronics Corporation Stock
RoHS : Compliant
222
R5F566TEBGFP#30

Renesas Electronics Corporation Stock
RoHS : Compliant
181
R5F56609DDFP#30

Renesas Electronics Corporation Stock
RoHS : Compliant
88

Pasternack Enterprises US
PE3C5566

Pasternack Enterprises Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. Push-On 4.3-10 Male to N Male Right Angle Cable Using PE-SR402FL Coax., Radio frequency assembly push-on 4.3-10 male to N male right angle cable using PE-SR402FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Push-on 4.3-10 male to N male right angle cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 4.3-10 cable connection on one end and right angle type N cable connection on the other. Our 4.3-10 to right angle N type cable assemblies have a male gender on end 1 and male on end 2. This 4.3-10 to type N cable is a male to male coax assembly, PE3C5566, can also be known as a 4.3-10 plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to N type plug cable assembly PE3C5566 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 4.3-10 cable assembly is manufactured with 4.3-10 to right angle N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 4.3-10 male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5566 can also be used in the other direction and will be right angle type N male to 4.3-10 male cable assembly if the opposite connectivity is required. 4.3-10 plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on 4.3-10 male to N male right angle cable using PE-SR402FL coax.
0
PE3W14566LF

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. N Female Bulkhead to N Female Bulkhead Cable Using RG178 Coax, LF Solder. PE3W14566LF is a N female bulkhead to N female bulkhead cable using RG178 coax. This Pasternack N female bulkhead to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N bulkhead to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14566LF N female bulkhead to N female bulkhead cable assembly is constructed with RG178 coax.
0
PE3W18566/HS

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to MCX Jack Cable Using LMR-100 Coax with HeatShrink. PE3W18566/HS is a SMA male right angle to MCX jack cable using LMR-100A coax. This Pasternack SMA male right angle to MCX jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. SMA right angle to MCX coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to jack MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18566/HS SMA male right angle to MCX jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W25667

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Slide-On BMA Jack 2 Hole Flange Cable Using RG402 Coax. PE3W25667 is a SMA male right angle to BMA jack 2 hole flange cable using RG402 coax. This Pasternack SMA male right angle to BMA jack 2 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BMA for connector 2. SMA right angle to BMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to jack BMA 2 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W25667 SMA male right angle to BMA jack 2 hole flange cable assembly is constructed with RG402 coax.
0
PE3566/HS

Pasternack Enterprises
0
PE3W13566LF

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMA Female Bulkhead Cable Using RG141 Coax, LF Solder. PE3W13566LF is a SMA female bulkhead to SMA female bulkhead cable using RG141 coax. This Pasternack SMA female bulkhead to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA bulkhead to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13566LF SMA female bulkhead to SMA female bulkhead cable assembly is constructed with RG141 coax.
0
PE3W17566

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. SMA Male to Push-On SMP Female Right Angle Cable Using PE-C100-LSZH Coax. PE3W17566 is a SMA male to SMP female right angle cable using PE-C100-LSZH coax. This Pasternack SMA male to SMP female right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. SMA to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17566 SMA male to SMP female right angle cable assembly is constructed with PE-C100-LSZH coax.
0
PE3W25666

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Slide-On BMA Jack 2 Hole Flange Cable Using PE-SR405FL Coax. PE3W25666 is a SMA male right angle to BMA jack 2 hole flange cable using PE-SR405FL coax. This Pasternack SMA male right angle to BMA jack 2 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BMA for connector 2. SMA right angle to BMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to jack BMA 2 hole flange cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W25666 SMA male right angle to BMA jack 2 hole flange cable assembly is constructed with PE-SR405FL coax.
0
PE3C5668

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Trimmed Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-1/2SFHC, RF Cable Type: 1/2" Superflexible, RF Cable Impedance: 50 Ohm. N Male to Trimmed Lead Cable Using 1/2 inch Superflexible Coax., Radio frequency assembly N male to trimmed lead cable using 1/2 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to trimmed lead cable using 1/2 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to trimmed lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and trimmed lead cable connection on the other. Our type N to trimmed lead cable assemblies have a male gender on end 1 and sexless on end 2. This type N to trimmed lead cable is a male to sexless coax assembly, PE3C5668, can also be known as a type N plug to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. N type plug to trimmed lead sexless cable assembly PE3C5668 is built with 1/2" superflexible which is a corrugated coax type. The Pasternack corrugated N cable assembly is manufactured with N type to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to trimmed lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5668 can also be used in the other direction and will be trimmed lead sexless to type N male cable assembly if the opposite connectivity is required. Type N plug to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to trimmed lead cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to trimmed lead cable using 1/2 inch superflexible coax.
0
PE3C1566/HS

Pasternack Enterprises
0
PE3W05661

Pasternack Enterprises Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMB Jack to SMB Plug Right Angle Cable Using LMR-100 Coax. PE3W05661 is a SMB jack to SMB plug right angle cable using LMR-100A coax. This Pasternack SMB jack to SMB plug right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMB for connector 2. SMB to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack SMB to plug SMB right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05661 SMB jack to SMB plug right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W25669

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Slide-On BMA Plug Bulkhead Cable Using RG174 Coax. PE3W25669 is a SMA male right angle to BMA plug bulkhead cable using RG174 coax. This Pasternack SMA male right angle to BMA plug bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BMA for connector 2. SMA right angle to BMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to plug BMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25669 SMA male right angle to BMA plug bulkhead cable assembly is constructed with RG174 coax.
0
PE3FCA566-15M

Pasternack Enterprises Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC APC to ST UPC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Plenum, 2.0mm breakout, Yellow-15M. Pasternack’s PE3FCA566-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 4-fiber cable assembly is equipped with SC/APC to ST/UPC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA566-15M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/APC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.
1 : $155.99
5 : $149.75
10 : $143.51
25 : $137.27
0
PE3W14566

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. N Female Bulkhead to N Female Bulkhead Cable Using RG178 Coax. PE3W14566 is a N female bulkhead to N female bulkhead cable using RG178 coax. This Pasternack N female bulkhead to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N bulkhead to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14566 N female bulkhead to N female bulkhead cable assembly is constructed with RG178 coax.
0
PE3W15664

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. N Male to SC Male Cable Using RG142 Coax. PE3W15664 is a N male to SC male cable using RG142 coax. This Pasternack N male to SC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SC for connector 2. Our male N to male SC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15664 N male to SC male cable assembly is constructed with RG142 coax.
0

Vyrian
VSP2566PTR

Texas Instruments Consumer Circuit, PQFP48
RoHS : Compliant
7,874
XTPS566247DRLR

Texas Instruments Switching Regulator, 6A, 600kHz Switching Freq-Max, PDSO6
RoHS : Not Compliant
7,473
VSP2566PTRG4

Texas Instruments Consumer Circuit, PQFP48
RoHS : Compliant
6,883
XTPS566242DRLR

Texas Instruments Switching Regulator, 6A, 600kHz Switching Freq-Max, PDSO6
RoHS : Not Compliant
6,743
VSP2566PT

Texas Instruments Consumer Circuit, PQFP48
RoHS : Compliant
6,203
XTPS56637RPAR

Texas Instruments Switching Regulator, 500kHz Switching Freq-Max, PQCC10
5,527
XTPS566235RJNR

Texas Instruments Switching Controller, Current-mode, 600kHz Switching Freq-Max, PQCC13
4,084
VSP2566PTG4

Texas Instruments Consumer Circuit, PQFP48
RoHS : Compliant
3,899
XC2C256-6CPG132C

AMD Xilinx Flash PLD, 6ns, 256-Cell, PLA-Type, CMOS, PBGA132
RoHS : Compliant
3,852
XTPS56637RPAT

Texas Instruments Switching Regulator, 8.6A, 500kHz Switching Freq-Max, PQCC10
3,679
XTPS566238RQFR

Texas Instruments Switching Regulator, Current-mode, 6A, 600kHz Switching Freq-Max, PQCC9
RoHS : Not Compliant
3,675
XTPS566231RQFR

Texas Instruments Switching Regulator, Current-mode, 6A, 600kHz Switching Freq-Max, PQCC9
RoHS : Not Compliant
3,011
XC2C256-6CP132

AMD Xilinx
2,206
XC2C256-6CP132C

AMD Xilinx Flash PLD, 6ns, 256-Cell, PLA-Type, CMOS, PBGA132
RoHS : Not Compliant
2,183
XC2C256-6FT256

AMD Xilinx
1,777

Waytek, Inc.
12065663

Aptiv PLC Seal DELPHI PN 12065663
14 : $0.48
50 : $0.4297
100 : $0.3893
200 : $0.3692
500 : $0.3591
1,000 : $0.349
50,436
12065662

Aptiv PLC Aptiv 12065662 is a 5-way female Metri-Pack 630 Series relay connector rated for up to 46A. Designed for harness mounting, it requires five 1/4" terminals and supports high-current automotive relay connections.
10 : $0.7728
50 : $0.6524
100 : $0.5992
200 : $0.5768
500 : $0.546
1,000 : $0.5264
42,237
5663

Anderson Power Products Anderson Power 5663-BK reducing bushing adapts an SB175 connector contact from 1/0 Ga. to 6 Ga. cable. The bushing helps assure a proper conductor fit when crimping a contact designed for larger cable in battery and charger quick-disconnect assemblies.
RoHS : Compliant
1 : $10.4
10 : $9.78
50 : $9.1
100 : $7.95
200 : $7.58
500 : $7.21
91

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Link to Datasheet   |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com