 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
5-B-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 DigiKey | BST-80/10D-M25BR | BEISIT | Ex d breath vent M25BR |
| 50,000 | |
AT0805BRD0730R1L.jpg) | YAGEO Corporation | RES SMD 30.1 OHM 0.1% 1/8W 0805 RoHS : Compliant |
| 5,000 | ||
| AT0805BRD0730R1L | YAGEO Corporation | RES SMD 30.1 OHM 0.1% 1/8W 0805 RoHS : Compliant |
| 5,000 | ||
| AT0805BRD0730R1L | YAGEO Corporation | RES SMD 30.1 OHM 0.1% 1/8W 0805 RoHS : Compliant |
| 5,000 | ||
MIC37151-1.5BR | Rochester Electronics LLC | IC REG LINEAR 1.5V 1.5A S-PAK-5 RoHS : Not Compliant |
| 4,199 | ||
| CC0805BRNPO9BN6R2 | YAGEO Corporation | CAP CER 6.2PF 50V C0G/NPO 0805 RoHS : Compliant |
| 3,846 | ||
| CC0805BRNPO9BN6R2 | YAGEO Corporation | CAP CER 6.2PF 50V C0G/NPO 0805 RoHS : Compliant |
| 3,846 | ||
| G4020E05B-RSR | Mechatronics Fan Group | FAN AXIAL 40X20MM BALL 5VDC WIRE |
| 1,073 | ||
AD9235BRUZRL7-20 | Analog Devices Inc | IC ADC 12BIT 28-TSSOP RoHS : Compliant |
| 682 | ||
| AD9235BRUZRL7-20 | Analog Devices Inc | IC ADC 12BIT 28-TSSOP RoHS : Compliant |
| 682 | ||
| AD9235BRUZRL7-20 | Analog Devices Inc | IC ADC 12BIT 28-TSSOP RoHS : Compliant |
| 682 | ||
AD96685BRZ | Analog Devices Inc | IC COMPARATOR 1CH 16-SOIC RoHS : Compliant |
| 406 | ||
AD9835BRUZ | Analog Devices Inc | IC DDS 50MHZ 10BIT 16TSSOP RoHS : Compliant |
| 203 | ||
| AD7785BRUZ | Analog Devices Inc | IC ADC 20BIT 16-TSSOP RoHS : Compliant |
| 151 | ||
| MA648D-05BRU | MicroPower Direct LLC | DC/DC,6W,48V IN,5V OUT,1.5 KV |
| 11 | ||
 Avnet Americas | AT0805BRD07100KL | YAGEO Corporation | SMD Chip Resistor, 100 kOhm, ? 0.1%, 125 mW, 0805 [2012 Metric], Thin Film, Precision, AT Series - Tape and Reel (Alt: AT0805BRD07100KL) RoHS : Compliant |
| 50,000 | |
| AT0805BRD0780K6L | YAGEO Corporation | SMD Chip Resistor, 80.6 kOhm, ? 0.1%, 125 mW, 0805 [2012 Metric], Thin Film, Precision, AT Series - Tape and Reel (Alt: AT0805BRD0780K6L) RoHS : Compliant |
| 50,000 | ||
| 1N5355BRLG | onsemi | 5 Watt Surmetic 40 Zener Voltage Regulators 18 V. ONSSPCDDECI9E6E; - Tape and Reel (Alt: 1N5355BRLG) RoHS : Compliant |
| 44,000 | ||
| AT0805BRD071ML | YAGEO Corporation | SMD Chip Resistor, 1 MOhm, ? 0.1%, 125 mW, 0805 [2012 Metric], Thin Film, Precision, AT Series - Tape and Reel (Alt: AT0805BRD071ML) RoHS : Compliant |
| 40,000 | ||
| RT0805BRD076K8L | YAGEO Corporation | SMD Chip Resistor, 6.8 kOhm, ? 0.1%, 125 mW, 0805 [2012 Metric], Thin Film - Tape and Reel (Alt: RT0805BRD076K8L) RoHS : Compliant |
| 25,000 | ||
| RT0805BRD07470KL | YAGEO Corporation | SMD Chip Resistor, 470 kOhm, ? 0.1%, 125 mW, 0805 [2012 Metric], Thin Film - Tape and Reel (Alt: RT0805BRD07470KL) RoHS : Compliant |
| 10,000 | ||
| RT0805BRD0775RL | YAGEO Corporation | SMD Chip Resistor, 75 Ohm, ? 0.1%, 125 mW, 0805 [2012 Metric], Thin Film - Tape and Reel (Alt: RT0805BRD0775RL) RoHS : Compliant |
| 5,000 | ||
| RT0805BRD0793R1L | YAGEO Corporation | SMD Chip Resistor, 93.1 Ohm, ? 0.1%, 125 mW, 0805 [2012 Metric], Thin Film - Tape and Reel (Alt: RT0805BRD0793R1L) RoHS : Compliant |
| 5,000 | ||
| 799-145-B-R6 | Glenair Inc | JACKPOST, REAR PANEL, 7970 CONN - Bulk (Alt: 799-145-B-R6) RoHS : Not Compliant | 10 | |||
| REF5BR4780BZ15W1TOBO1 | Infineon Technologies AG | - Bulk (Alt: REF5BR4780BZ15W1TOBO1) RoHS : Compliant |
| 3 | ||
| EVAL5BR3995BZBUCK1TOBO1 | Infineon Technologies AG | - Boxed Product (Development Kits) (Alt: EVAL5BR3995BZBUCK1TOBO1) RoHS : Compliant |
| 3 | ||
| REF5BR3995CZ16W1TOBO1 | Infineon Technologies AG | - Boxed Product (Development Kits) (Alt: REF5BR3995CZ16W1TOBO1) RoHS : Compliant |
| 3 | ||
| REF5BR3995BZ116W1TOBO1 | Infineon Technologies AG | Reference Board, Coolset, ICE5BR3995BZ, SMPS, 16W, Power Management - Bulk (Alt: REF5BR3995BZ116W1TOBO1) RoHS : Not Compliant |
| 1 | ||
| REF5BR4780BZ115W1TOBO1 | Infineon Technologies AG | Reference Board, Coolset, ICE5BR4780BZ, SMPS, 15W, Power Management - Bulk (Alt: REF5BR4780BZ115W1TOBO1) RoHS : Not Compliant |
| 1 | ||
| EVAL5BR3995BZ1BUCK1TOBO1 | Infineon Technologies AG | Evaluation Board, ICE5BR3995BZ-1, Non-Isolated Buck Converter, Power Management - Voltage Regulator - Bulk (Alt: EVAL5BR3995BZ1BUCK1TOBO1) RoHS : Not Compliant |
| 1 | ||
 Mouser Electronics | AE0805BR-07200KL | YAGEO Corporation | Thick Film Resistors - SMD 200KOhm 0805 1/3W 0.1% Hal Free AEC-Q200 RoHS : Compliant |
| 9,196 | |
| BR24G02FJ-5E2 | ROHM Semiconductor | EEPROM 2Kbit, I2C BUS, Low Current Consumption, Standard Serial EEPROM RoHS : Compliant |
| 4,737 | ||
| BR24G02FVM-5TR | ROHM Semiconductor | EEPROM 2Kbit, I2C BUS, Low Current Consumption, Standard Serial EEPROM RoHS : Compliant |
| 4,656 | ||
| BR25H16ANUX-5ACTR | ROHM Semiconductor | EEPROM 16KBit, SPI BUS, Serial EEPROM for Automotive (125℃ Operation) : BR25H160xxx-5AC Series is a 16Kbit serial EEPROM of SPI BUS Interface. RoHS : Compliant |
| 4,000 | ||
| BR25G256NUX-5ATR | ROHM Semiconductor | EEPROM 256KBit, SPI BUS, Serial EEPROM : BR25G256NUX-5A is a 256 Kbit serial EEPROM of SPI BUS Interface. RoHS : Compliant |
| 4,000 | ||
| BR25G256FVM-5ATR | ROHM Semiconductor | EEPROM 256KBit, SPI BUS, Serial EEPROM : BR25G256FVM-5A is a 256 Kbit serial EEPROM of SPI BUS Interface. RoHS : Compliant |
| 3,000 | ||
| BR25G512FVM-5ATR | ROHM Semiconductor | EEPROM SERIAL EEPROM RoHS : Compliant |
| 3,000 | ||
| BR25H512FVT-5ACE2 | ROHM Semiconductor | EEPROM 512KBit, SPI BUS, Serial EEPROM for Automotive (125℃ Operation) : BR25H512xxx-5AC Series is a 512Kbit serial EEPROM of SPI BUS Interface. RoHS : Compliant |
| 2,980 | ||
| BR25H1MFVT-5ACE2 | ROHM Semiconductor | EEPROM 1MBit, SPI BUS, High Speed Write Cycle, High Endurance, Serial EEPROM for Automotive (125℃ Operation) : BR25H1Mxxx-5AC Series is a 1Mbit serial EEPROM of SPI BUS Interface. RoHS : Compliant |
| 2,965 | ||
| BR25H128FVM-5ACTR | ROHM Semiconductor | EEPROM 128KBit, SPI BUS, High Speed Write Cycle, High Endurance, Serial EEPROM for Automotive RoHS : Compliant |
| 2,895 | ||
| BR24G02FVT-5E2 | ROHM Semiconductor | EEPROM 2Kbit, I2C BUS, Low Current Consumption, Standard Serial EEPROM RoHS : Compliant |
| 2,750 | ||
| BR25G2MFJ-5AE2 | ROHM Semiconductor | EEPROM 2MBit, SPI BUS, Serial EEPROM : BR25G2MFJ-5A is a 2Mbit serial EEPROM of SPI BUS Interface. RoHS : Compliant |
| 2,370 | ||
| BR24G2MFJ-5AE2 | ROHM Semiconductor | EEPROM 2Mbit, I²C BUS, Low Current Consumption, Standard Serial EEPROM RoHS : Compliant |
| 2,209 | ||
| SN74HC595BRWNRG4 | Texas Instruments | Counter Shift Registers 8-Bit Shift Register s With 3-State Outp RoHS : Compliant |
| 1,383 | ||
| AB-RTC-TNA-32.768kHz-2-T1 | Abracon Corporation | Real Time Clock RTC TCXO I2C 3ppm 3215 AEC-Q200 RoHS : Compliant |
| 900 | ||
 Newark | RP0805BRD078K2L | YAGEO Corporation | RES, 8K2, 150V, THIN FILM, 0805; RoHS : Compliant |
| 4,950 | |
| RP0805BRD078K2L | YAGEO Corporation | RES, 8K2, 150V, THIN FILM, 0805; RoHS : Compliant |
| 4,950 | ||
| RP0805BRD07150KL | YAGEO Corporation | RES, 150K, 150V, THIN FILM, 0805; RoHS : Compliant |
| 4,450 | ||
| RP0805BRD07150KL | YAGEO Corporation | RES, 150K, 150V, THIN FILM, 0805; RoHS : Compliant |
| 4,450 | ||
| CQ0805BRNPO0BN1R0 | YAGEO Corporation | CAP, 1PF, 100V, MLCC, 0805; RoHS : Compliant |
| 3,640 | ||
| CQ0805BRNPO0BN1R0 | YAGEO Corporation | CAP, 1PF, 100V, MLCC, 0805; RoHS : Compliant |
| 3,640 | ||
| AT0805BRB0710KL | YAGEO Corporation | RES, 10K, 0.1%, 0.125W, THIN FILM, 0805; RoHS : Compliant |
| 3,509 | ||
| MIMXRT1061CVJ5BR | NXP Semiconductors | MICROPROCESSOR, 500MHZ, 32BIT, MAPBGA; RoHS : Compliant |
| 1,000 | ||
| AD9235BRUZ-65 | Analog Devices Inc | ADC, 12BIT, 40MSPS; RoHS : Compliant |
| 95 | ||
AD7495BRZ | Analog Devices Inc | ADC, 12BIT, 1MSPS, SINGLE ENDED; RoHS : Compliant |
| 82 | ||
| ADUM1285BRZ | Analog Devices Inc | DIGITAL ISOLATOR, 2CH, -40 TO 125DEG C; RoHS : Compliant |
| 49 | ||
AD7945BRZ | Analog Devices Inc | DAC, 12BIT, SOP-20, -40 TO 85DEG C; RoHS : Compliant |
| 47 | ||
| AD96685BRZ | Analog Devices Inc | COMPARATOR, SOIC-16, -25 TO 85DEG C; RoHS : Compliant |
| 45 | ||
| REF5BR3995BZ116W1TOBO1 | Infineon Technologies AG | REFERENCE BOARD, SMPS, POWER MANAGEMENT; RoHS : Compliant |
| 5 | ||
| 67025 BR321 | Alpha Wire | WIRE, MPPE, BROWN, 0.25 MM², 164 FT; RoHS : Compliant |
| 1 | ||
 NXP Semiconductors | LPC845-BRK | NXP Semiconductors | LPC845 Breakout board, RoHS : Compliant |
| 8 | |
 RS | GPB508AL05BR | CW Industries | PUSHBUTTON SWITCH, GPB SERIES, SPST, OFF-(ON),LED ILLUMINATED, RED,3A,125VAC, SOLDER RoHS : Compliant |
| 118 | |
| RS119-D16P1 (2563914 | ROCK 5B | ROCK 5 B) | OKdo | ROCK 5 MODEL B SINGLE BOARD COMPUTER, RK3588, 16 GB LPDDR4X |
| 56 | ||
| F15BR250V4AS | Eaton Bussmann | FUSE CYLINDER TIME DELAY/REJECT 4 A F15 CARTRIDGE 250 V SILVER |
| 10 | ||
| 3075 BR005 (NULL) | Alpha Wire | HOOK-UP WIRE, TC, 18 AWG, 16X30, BROWN PVC INSULATED, -20 TO +105C, 600V |
| 6 | ||
| 355 BROWN CX/500 | Olympic Wire & Cable Corp | HOOK-UP WIRE, 18 AWG, 16X30, TC, PVC INS, BROWN, UL1007, UL1569, TR-64,MIL-W-76B |
| 5 | ||
| 3075 BR001 (NULL) | Alpha Wire | HOOK-UP WIRE, 18 AWG, 16/30 STRAND, UL 1015, PVC INSULATED, BROWN, 3075 SERIES |
| 4 | ||
| 6715 BR001 | Alpha Wire | HOOK-UP WIRE, ECOWIRE,6715, BROWN, 18 AWG, 16X30,MPPE INS,600V, ECOWIRE SERIES |
| 2 | ||
| 67025 BR321 | Alpha Wire | METRIC ECOWIRE, BROWN, 50M, .25MM2, 32X0.10, 600V, MPPE, 23 AWG, 67025 SERIES |
| 2 | ||
| GPB507A05BR | CW Industries | PUSHBUTTON SWITCH, GPB SERIES, SPST, OFF-(ON),NON-ILLUMINATED, RED,6A,125VAC, SOLDER RoHS : Compliant |
| 2 | ||
| 3055 BR001 | Alpha Wire | HOOK-UP WIRE, 18 AWG, 16X30, 0.016 IN., 0.080 IN., 300V, BROWN, 3055 SERIES |
| 1 | ||
| B30C-1125-595-BR | Brady Worldwide Inc | INDOOR/OUTDOOR VINYL LABELS, 1.125"W X 100'L, BROWN |
| 1 | ||
| B30C-4000-595-BR | Brady Worldwide Inc | B30,B595,BRN,4" X 100 FT |
| 1 | ||
| 365 BROWN CX/100 | Olympic Wire & Cable Corp | HOOK-UP WIRE, 14 AWG, 41X30, TC, PVC INS, BROWN, UL1015, UL1032, MTW, BC-5W2,TEW |
| 1 | ||
| 1555 BR001 (NULL) | Alpha Wire | HOOK-UP WIRE, TC, 18 AWG, 16X30, BROWN PVC INSULATED, -40 TO +80C, 1000V |
| 1 | ||
| 7055 BR001(MIL-SPEC) (NULL) | Alpha Wire | HOOK-UP WIRE, TC, 22 AWG, 7X30, BROWN PVC INSULATED, -55 TO +80C, 150V |
| 1 | ||
 Microchip Technology Inc | 1N1205BR | Microchip Technology Inc | Std Rectifier _ DO-4, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | |
 Bisco Industries | THZ-1024-225-BR | INSERTS | 68,112 | |||
| GS 3-5 BRASS | Stimpson Company | 46,654 | ||||
| GS 8-5 BRASS | Stimpson Company | 7,921 | ||||
| 101195-BR | SOCKET SCREWS | 2,000 | ||||
| GS 4-5 BRASS | Stimpson Company | 323 | ||||
| 6075-2.5BR034 | Stanley Engineered Fastening | 248 | ||||
| DIN125BRM3 | Superior Washer & Gasket Company | 247 | ||||
| 6075L-2.5BR056 | MISC. INDUSTRIAL HRD | 220 | ||||
| NM-25-BR | Sealcon USA | 108 | ||||
| S-6045 BRASS | MISC. EYELETS | 88 | ||||
| 875305-BR | SOCKET SCREWS | 52 | ||||
| S6145 BRASS | MISC. EYELETS | 50 | ||||
| 012145-BR | SOCKET SCREWS | 48 | ||||
| 2.04256.95 BRK5 | Colson Group | 24 | ||||
| 3-908 VT75 BRN | O-RINGS | 1 | ||||
 Onlinecomponents.com | BK-AGC-B-5-R | Eaton Bussmann | BOARD WASHABLE FUSE, RoHS 5A | Eaton Electronics BK/AGC-B-5-R RoHS : Compliant |
| 0 | |
| AT-S-26-6/4/B-5/R | ASSMANN WSW components GmbH | Modular Cable RoHS : Compliant |
| 0 | ||
| AT-S-26-6/6/B-5/R | ASSMANN WSW components GmbH | Mod Cable 5FT Straight RoHS : Compliant |
| 0 | ||
| AT-C-26-6/6/B-5/R | ASSMANN WSW components GmbH | Cable Assembly Modular UTP 1.752m 26AWG (RJ-11/RJ-12/RJ-14/RJ-25) to (RJ-11/RJ-12/RJ-14/RJ-25) 6 to 6 POS PL-PL... RoHS : Compliant |
| 0 | ||
| HDTM-3-06-1-S-VT-5-R-5-B | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HDTM-3-04-2-S-VT-5-R-5-B | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HDTM-3-08-1-S-VT-5-R-5-B | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HDTM-3-08-2-S-VT-5-R-5-B | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HDTM-3-06-2-S-VT-5-R-5-B | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HDTM-3-04-1-S-VT-5-R-5-B | Samtec Inc | RoHS : Compliant |
| 0 | ||
| SAC-3P-1-5-PUR/B-1L-R-ES | Phoenix Contact | Sensor/actuator cable - 3-position - PUR halogen-free - black-gray RAL 7021 - free cable end - on Valve connector B (10 mm) - with 1 LED - connected with Damping diode - cable length: 1.5 m - With holding current limiting device for energy reduction RoHS : Compliant |
| 0 | ||
| HDTM-3-04-1-S-VT-5-R-3-B | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HDTM-3-08-2-S-VT-5-R-4-B | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HDTM-3-04-1-S-VT-5-R-4-B | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HDTM-3-04-1-S-VT-5-R-2-B | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Rochester Electronics | AD9835BRUZ | Analog Devices Inc | IC ADC 1 CONV 8Bits Flash Parallel 24-SOP Tube RoHS : Compliant |
| 4 | |
ADG3245BRU-REEL7 | Analog Devices Inc | Bus Driver, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Not Compliant |
| 18,521 | ||
| AD5245BRJZ10-R2 | Analog Devices Inc | Pot Digital 1 Element 256 POS 10 kOhm 2.7V ±30% SOT-23-8 T/R RoHS : Compliant |
| 66 | ||
| AD7945BR-REEL | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.6us Settling Time, PDSO20 RoHS : Not Compliant |
| 1,326 | ||
| ADT75BRMZ-REEL | Analog Devices Inc | Temperature Sensor ICs I²C/SMBus Digital, Local 8-SOP T/R RoHS : Compliant |
| 1,444 | ||
| ADUM1285BRZ | Analog Devices Inc | Digital Isolators General Purpose 25kV/µs 16-SOIC T/R RoHS : Compliant |
| 3 | ||
| AD5245BRJ50-R2 | Analog Devices Inc | Digital Potentiometer, 1 Func, 50000ohm, 2-wire Serial Control Interface, 256 Positions, PDSO8 RoHS : Not Compliant |
| 207 | ||
| AD9215BRU-65 | Analog Devices Inc | ADC, Flash Method, 10-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, PDSO28 RoHS : Not Compliant |
| 877 | ||
| ADR435BR | Analog Devices Inc | Three Terminal Voltage Reference, 1 Output, 5V, Trim/Adjustable, PDSO8 RoHS : Not Compliant |
| 2,276 | ||
ADR5045BRTZ-REEL7 | Analog Devices Inc | IC VOL REF Shunt Fixed 5V 15mA ±0.1% SOT-23-3 T/R RoHS : Compliant |
| 2,445 | ||
AD7495BRM-REEL7 | Analog Devices Inc | ADC, Successive Approximation, 12-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO8 RoHS : Not Compliant |
| 4,880 | ||
| AD7495BRMZ | Analog Devices Inc | IC ADC 1 CONV 12Bits SAR Parallel 24-SOP T/R RoHS : Compliant |
| 10,652 | ||
| TMP05BRT-500RL7 | Analog Devices Inc | Serial Switch/Digital Sensor, 12 Bit(s), 1Cel, Hybrid, Rectangular, 5 Pin, Surface Mount RoHS : Not Compliant |
| 497 | ||
| MIC37150-2.5BR | Micrel Inc | Fixed Positive LDO Regulator, 2.5V, 0.5V Dropout, PSSO3 RoHS : Not Compliant |
| 6,109 | ||
| MIC37151-1.5BR | Micrel Inc | Fixed Positive LDO Regulator, 1.5V, 0.5V Dropout, BIPolar, PSSO5 RoHS : Not Compliant |
| 4,199 | ||
 Sager | HLCD-20-03.25-BR-TR-3 | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant |
| 0 | |
| HLCD-30-04.25-BR-BR-1 | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant |
| 0 | ||
| HLCD-40-02.05-BRS-TH-1 | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant |
| 0 | ||
| HLCD-40-02.75-BR-TR-3 | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant |
| 0 | ||
| FP075BRS | Hubbell Incorporated | 3/4 FF PLUG, BRASS |
| 0 | ||
| PS15-20MC5BR1MEG | TT electronics / BI Technologies | Slide Potentiometers |
| 0 | ||
| PS15-21PC5BR500K | TT electronics / BI Technologies | Slide Potentiometers |
| 0 | ||
| PS20-10MC5BR20K | TT electronics / BI Technologies | Slide Potentiometers |
| 0 | ||
| PS20-10PC5BR10K | TT electronics / BI Technologies | Slide Potentiometers |
| 0 | ||
| PS45-20MC5BR200K | TT electronics / BI Technologies | Slide Potentiometers |
| 0 | ||
| PS45-21MC5BR10K | TT electronics / BI Technologies | Slide Potentiometers |
| 0 | ||
| PS45-21PC5BR200K | TT electronics / BI Technologies | Slide Potentiometers |
| 0 | ||
| PS60-11MC5BR100K | TT electronics / BI Technologies | Slide Potentiometers |
| 0 | ||
| PS60-20MC5BR50K | TT electronics / BI Technologies | Slide Potentiometers |
| 0 | ||
| PS60-21PC5BR10K | TT electronics / BI Technologies | Slide Potentiometers |
| 0 | ||
 TME | KGM15BR71E104JT | Kyocera AVX Components | Capacitor: ceramic; MLCC; 100nF; 25V; X7R; ±5%; SMD; 0603; 180mm RoHS : Compliant |
| 5,033 | |
| 97-5BR | GEBO | Splice terminal: 90° elbow; max.6bar@<90°C,max.16bar@10°C÷30°C |
| 13 | ||
| 290-5BR | GEBO | Splice terminal: plug; hexagonal; brass CW617N; BR |
| 13 | ||
| 240-25BR | GEBO | Splice terminal: muff; reductive,female-female; brass CW617N |
| 12 | ||
| 340-5BR | GEBO | Splice terminal: double connector; brass CW617N; Thread: G 3/4" |
| 10 | ||
| 241-25BR | GEBO | Splice terminal: adapter; male-female,reductive; brass CW617N |
| 5 | ||
| AD5245BRJZ100-R2 | Analog Devices Inc | IC: digital potentiometer; I2C; 100kΩ; 8bit; SOT23-8; SMD; Ch: 1 RoHS : Compliant |
| 0 | ||
AD7805BRZ | Analog Devices Inc | IC: D/A converter; 10bit; Ch: 4; 3.3÷5V; SO28-W RoHS : Compliant |
| 0 | ||
ADG715BRUZ | Analog Devices Inc | IC: analog switch; SPST; Ch: 8; TSSOP24; 2.7÷5.5VDC; 155MHz RoHS : Compliant |
| 0 | ||
| AD7705BRZ | Analog Devices Inc | IC: A/D converter; AFE; Ch: 2; 16bit; 2.7÷3.3/4.75÷5.25V; SO16-W RoHS : Compliant |
| 0 | ||
| KGM15BR50J225MM | Kyocera AVX Components | Capacitor: ceramic; MLCC; 2.2uF; 6.3V; X5R; ±20%; SMD; 0603 RoHS : Compliant |
| 0 | ||
| KGM15BR51E474KM | Kyocera AVX Components | Capacitor: ceramic; MLCC; 470nF; 25V; X5R; ±10%; SMD; 0603 RoHS : Compliant |
| 0 | ||
| KGM15BR71A105MT | Kyocera AVX Components | Capacitor: ceramic; MLCC; 1uF; 10V; X7R; ±20%; SMD; 0603; 180mm RoHS : Compliant |
| 0 | ||
| KGM15BR71C224KM | Kyocera AVX Components | Capacitor: ceramic; MLCC; 220nF; 16V; X7R; ±10%; SMD; 0603; 330mm RoHS : Compliant |
| 0 | ||
| KGM15BR71H273JT | Kyocera AVX Components | Capacitor: ceramic; MLCC; 27nF; 50V; X7R; ±5%; SMD; 0603; 180mm RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | TPS51225BRUKR | Texas Instruments | IC REG BUCK/LINEAR SYNC 20WQFN RoHS : Compliant | 169,217 | ||
TPS51275BRUKR | Texas Instruments | IC REG QD BCK/LINEAR SYNC 20WQFN RoHS : Compliant | 149,930 | |||
| TPS51225BRUKT | Texas Instruments | IC REG BUCK/LINEAR SYNC 20WQFN RoHS : Compliant | 89,490 | |||
SN74HC595BRWNR | Texas Instruments | IC SHIFT REGISTER 8BIT 16X1QFN RoHS : Compliant | 10,258 | |||
1N5935BRLG | onsemi | Zener Voltage Regulator Diode RoHS : Compliant | 5,464 | |||
| ADUM1285BRZ-RL7 | Analog Devices Inc | DGTL ISO 3KV 2CH GEN PURP 8SOIC RoHS : Compliant | 1,000 | |||
 ComSIT USA | AD5245BRJZ5RL7 | Analog Devices Inc | AVAILABLE EU | 1,088 | ||
| MIMXRT1062CVJ5BR | NXP Semiconductors | AVAILABLE EU | 233 | |||
| AD5725BRSZ500RL7 | Analog Devices Inc | AVAILABLE EU | 287 | |||
| AD5245BRJZ100RL7 | Analog Devices Inc | AVAILABLE EU | 7 | |||
| AT0805BRD0724R9L | YAGEO Corporation | AVAILABLE EU RoHS : Compliant | 15,786 | |||
| KGM15BR71H224JT | Kyocera AVX Components | AVAILABLE EU RoHS : Compliant | 1,376 | |||
| RT0805BRD0715KL | YAGEO Corporation | AVAILABLE EU RoHS : Compliant | 113 | |||
| ADR425BRZREEL7 | Analog Devices Inc | AVAILABLE EU | 353 | |||
ComSIT USA | RT0805BRD0747KL | YAGEO Corporation | THIN FILM CHIP RESISTOR Fixed Resistor, Thin Film, 0.125W, 47000ohm, 150V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 0805 RoHS : Compliant | 30,000 | ||
| CSTCR4M00G55BR0 | Murata Manufacturing Co Ltd | CERAMIC RESONATOR Ceramic Resonator, 4MHz Nom RoHS : Compliant | 24,000 | |||
| BZW0615BR0 | TSC Electronics Ltd | TRANSIENT VOLTAGE SUPPRESSOR Trans Voltage Suppressor Diode, 600W, 15.3V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AC RoHS : Compliant | 10,500 | |||
| RT0805BRD073KL | YAGEO Corporation | Res Thin Film 0805 3K Ohm 0.1% 0.125W(1/8W) �25ppm/�C Pad SMD T/R RoHS : Compliant | 5,000 | |||
| DS25BR110TSDNOPB | Texas Instruments | Line Driver, 1 Func, 1 Driver, 1 Rcvr RoHS : Compliant | 4,845 | |||
| ADUM1285BRZ | Analog Devices Inc | CMOS, PDSO8 RoHS : Compliant | 1,866 | |||
| ADUM1285BRZRL7 | Analog Devices Inc | 3 KV RMS DUAL CHANNEL DIGITAL ISOLATOR Analog Circuit, 1 Func, DMOS, PDSO8 RoHS : Compliant | 1,270 | |||
| AD9685BR | Analog Devices Inc | Electronic Component RoHS : Not Compliant | 138 | |||
| AD7945BR | Analog Devices Inc | PLUS 3.3 V TO PLUS 5V MULTIPLYING 12-BIT DAC D/A Converter, 1 Func, Parallel, Word Input Loading, 0.6us Settling Time, PDSO20 RoHS : Not Compliant | 55 | |||
| AD96685BRZ | Analog Devices Inc | ULTRAFAST COMPARATOR Comparator, 1 Func, 3000uV Offset-Max, 2.5ns Response Time, BIPolar, PDSO16 RoHS : Compliant | 39 | |||
| AD7705BRZ | Analog Devices Inc | 3 V/5 V, 1 MILLI WATT, 2-CHANNEL, 16-BIT, SIGMA-DELTA ADC ADC, Delta-Sigma, 16-Bit, 1 Func, 2 Channel, Serial Access, CMOS, PDSO16 RoHS : Compliant | 23 | |||
| AD7945BRZ | Analog Devices Inc | PLUS 3.3 V TO PLUS 5V MULTIPLYING 12-BIT DAC D/A Converter, 1 Func, Parallel, Word Input Loading, 0.6us Settling Time, PDSO20 RoHS : Compliant | 22 | |||
AD7825BR | Analog Devices Inc | 3 V/5 V, 2 MSPS, 8-BIT, 4-CHANNEL SAMPLING ADC ADC, Flash Method, 8-Bit, 1 Func, 4 Channel, Parallel, 8 Bits Access, CMOS, PDSO24 RoHS : Not Compliant | 16 | |||
| AD7705BRU | Analog Devices Inc | 3 V/5 V, 1 MILLI WATT, 2-CHANNEL, 16-BIT, SIGMA-DELTA ADC ADC, Delta-Sigma, 16-Bit, 1 Func, 2 Channel, Serial Access, CMOS, PDSO16 RoHS : Not Compliant | 8 | |||
| AD9235BRUZ40 | Analog Devices Inc | 12-BIT, 40 MSPS 3 V A/D CONVERTER ADC, Proprietary Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, PDSO28 RoHS : Compliant | 5 | |||
 Interstate Connecting Components | D38999/44FF35BR | Glenair Inc | 38999 RECP 66#22D SKT RoHS : Compliant |
| 0 | |
| AB-BD05BR-BDBR-QD005 | Amphenol LTW Technology | X-LOK, STANDARD SIZE, PLASTIC, OVERMOLDED | 0 | |||
| D38999/42WC35BR | Glenair Inc | 38999 RECP 22#22D SKT RoHS : Not Compliant |
| 0 | ||
| D38999/46WB5BR | Glenair Inc | 38999 PLG 5#20 SKT RoHS : Not Compliant |
| 0 | ||
| AB-BD05BR-BDBR-QD001 | Amphenol LTW Technology | X-LOK, STANDARD SIZE, PLASTIC, OVERMOLDED | 0 | |||
| AB-DC05BR-DCBR-QE002 | Amphenol LTW Technology | X-LOK, LARGE SIZE, PLASTIC, 20 OVERMOLDED | 0 | |||
| D38999/40FJ35BR | Glenair Inc | 38999 RECP 128#22D SKT RoHS : Compliant |
| 0 | ||
| D38999/46FH35BR | Glenair Inc | 38999 PLG 100#22D SKT RoHS : Compliant |
| 0 | ||
| AB-BD05BR-BDBR-QD004 | Amphenol LTW Technology | X-LOK, STANDARD SIZE, PLASTIC, OVERMOLDED | 0 | |||
| D38999/46FJ35BR | Glenair Inc | 38999 PLG 128#22D SKT RoHS : Compliant |
| 0 | ||
| D38999/40WB35BR | Glenair Inc | 38999 RECP 13#22D SKT RoHS : Not Compliant |
| 0 | ||
| D38999/42FG35BR | Glenair Inc | 38999 RECP 79#22D SKT RoHS : Compliant |
| 0 | ||
| D38999/40WH35BR | Glenair Inc | 38999 RECP 100#22D SKT RoHS : Not Compliant |
| 0 | ||
| D38999/44WB35BR | Glenair Inc | 38999 RECP 13#22D SKT RoHS : Not Compliant |
| 0 | ||
| D38999/46FB5BR | Glenair Inc | 38999 PLG 5#20 SKT RoHS : Compliant |
| 0 | ||
 NexGen Digital | RT0805BRD071RL | YAGEO Corporation | RoHS : Compliant | 300,585 | ||
| RT0805BRD071L | YAGEO Corporation | 179,645 | ||||
| MFR-25BRE-PN182K | YAGEO Corporation | 5,000 | ||||
SN74LVT245BRGYR | Texas Instruments | RoHS : Compliant | 4,628 | |||
AD7685BRMZRL7 | Analog Devices Inc | RoHS : Compliant | 13 | |||
| ADR4525BRZ | Analog Devices Inc | RoHS : Compliant | 9 | |||
 PEI Genesis | BACC65BR1 | Amphenol PCD |
| 0 | ||
| J1305BR-8 | SOURIAU-SUNBANK |
| 0 | |||
| BL015BRL22659XW | Amphenol PCD |
| 0 | |||
 Powell Electronics | D38999/44FF35BR | Glenair Inc | SUPER 9 / SERIES III - 38999 CONNECTORS RoHS : Compliant |
| 10 | |
| D38999/40WB35BR | Glenair Inc | SUPER 9 / SERIES III - 38999 CONNECTORS RoHS : Not Compliant |
| 9 | ||
| D38999/46FB5BR | Glenair Inc | SUPER 9 / SERIES III - 38999 CONNECTORS RoHS : Compliant |
| 9 | ||
| D38999/40FJ35BR | Glenair Inc | SUPER 9 / SERIES III - 38999 CONNECTORS RoHS : Compliant |
| 8 | ||
| D38999/47WG35BR | Glenair Inc | SUPER 9 / SERIES III - 38999 CONNECTORS RoHS : Not Compliant |
| 8 | ||
| D38999/46WB5BR | Glenair Inc | SUPER 9 / SERIES III - 38999 CONNECTORS RoHS : Not Compliant |
| 6 | ||
| D38999/42WC35BR | Glenair Inc | SUPER 9 / SERIES III - 38999 CONNECTORS RoHS : Not Compliant |
| 5 | ||
| D38999/44WC35BR | Glenair Inc | SUPER 9 / SERIES III - 38999 CONNECTORS RoHS : Not Compliant |
| 5 | ||
| D38999/47WH35BR | Glenair Inc | SUPER 9 / SERIES III - 38999 CONNECTORS RoHS : Not Compliant |
| 5 | ||
| D38999/40WC35BR | Glenair Inc | SUPER 9 / SERIES III - 38999 CONNECTORS RoHS : Not Compliant |
| 5 | ||
| D38999/46FH35BR | Glenair Inc | SUPER 9 / SERIES III - 38999 CONNECTORS RoHS : Compliant |
| 3 | ||
| D38999/40WH35BR | Glenair Inc | SUPER 9 / SERIES III - 38999 CONNECTORS RoHS : Not Compliant |
| 3 | ||
| D38999/44WB35BR | Glenair Inc | SUPER 9 / SERIES III - 38999 CONNECTORS RoHS : Not Compliant |
| 3 | ||
| D38999/46FJ35BR | Glenair Inc | SUPER 9 / SERIES III - 38999 CONNECTORS RoHS : Compliant |
| 2 | ||
| D38999/42FG35BR | Glenair Inc | SUPER 9 / SERIES III - 38999 CONNECTORS RoHS : Compliant |
| 1 | ||
 Richardson RFPD | ER114DM4-5B/R | Teledyne Relays | RF RELAY RoHS : Compliant |
| 0 | |
| IVT5305BR-20.000MHZ(531919) | Rakon Limited | IVT5305BR 20.000 MHz RoHS : Compliant | 0 | |||
| KGM15BR71H104JT | Kyocera AVX Components | Cap Ceramic 0.1uF 50V X7R 5% Pad SMD 0603 125C T/R RoHS : Compliant | 0 | |||
| ADG3245BRUZ-REEL7 | Analog Devices Inc | Bus Switch 1-Element CMOS 8-IN 20-Pin TSSOP T/R RoHS : Compliant | 0 | |||
| IT5305BR-13.00 | Rakon Limited | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| KGM15BR51C105KT | Kyocera AVX Components | Cap Ceramic 1uF 16V X5R 10% Pad SMD 0603 85C T/R RoHS : Compliant | 0 | |||
| IT5305BR | Rakon Limited | OSC TCXO/VCTCXO | 0 | |||
| IVT5305BR-12.00 | Rakon Limited | OSCILLATOR VCXO RoHS : Compliant | 0 | |||
| ADR425BRZ-REEL7 | Analog Devices Inc | V-Ref Precision 5V 10mA 8-Pin SOIC N T/R RoHS : Compliant | 0 | |||
| KGM15BR51A225KM | Kyocera AVX Components | Cap Ceramic 2.2uF 10V X5R 10% Pad SMD 0603 85C T/R RoHS : Compliant | 0 | |||
| WMIPEA1015BR | Wall Industries Inc | AC/DC Wall Mount Power Supply | 0 | |||
| 513919IVT5305BR | Rakon Limited | OSCILLATOR VCXO RoHS : Compliant | 0 | |||
| KGM15BR51A225KT | Kyocera AVX Components | Cap Ceramic 2.2uF 10V X5R 10% Pad SMD 0603 85C T/R RoHS : Compliant | 0 | |||
| KGM15BR51A475KT | Kyocera AVX Components | Cap Ceramic 4.7uF 10V X5R 10% Pad SMD 0603 85C T/R RoHS : Compliant | 0 | |||
| IVT5305BR-14.74 | Rakon Limited | OSCILLATOR VCXO RoHS : Compliant | 0 | |||
 Chip 1 Exchange | RT0805BRB07620RL | YAGEO Corporation | INSTOCK RoHS : Compliant | 234,000 | ||
| CC0805BRNP09BN3R9 | Phyco Inc | INSTOCK | 46,485 | |||
| ADUM6028-5BRIZ | Analog Devices Inc | INSTOCK RoHS : Compliant | 4,637 | |||
| RT0805BRD##56K2L | YAGEO Corporation | INSTOCK | 4,128 | |||
| KGM15BR71E104JT | Kyocera AVX Components | INSTOCK RoHS : Compliant | 4,121 | |||
| RT0805BRD0775KL | YAGEO Corporation | INSTOCK RoHS : Compliant | 3,503 | |||
| 1N5375BRLG | onsemi | INSTOCK RoHS : Compliant | 2,990 | |||
| CSTCR4M00G55B-R0 | INSTOCK | 2,230 | ||||
| 1N5355BRL | Motorola Semiconductor Products | INSTOCK RoHS : Not Compliant | 2,000 | |||
CC0805BRNPO9BN2R2 | YAGEO Corporation | INSTOCK RoHS : Compliant | 752 | |||
| AD7945BRZ | Analog Devices Inc | INSTOCK RoHS : Compliant | 129 | |||
| IN5245BRL | INSTOCK | 100 | ||||
| RT0805BRD07560KL | YAGEO Corporation | INSTOCK RoHS : Compliant | 36 | |||
| AD7825BR | Analog Devices Inc | INSTOCK RoHS : Not Compliant | 27 | |||
| AD9835BRUZ | Analog Devices Inc | INSTOCK RoHS : Compliant | 22 | |||
 Avnet Abacus | RT0805BRD07100KL | YAGEO Corporation | SMD Chip Resistor 100 kOhm 01 125 mW 0805 2012 Metric Thin Film - Tape and Reel (Alt: RT0805BRD07100KL) RoHS : Compliant | 320,000 | ||
| RT0805BRD07470RL | YAGEO Corporation | SMD Chip Resistor 470 Ohm 01 125 mW 0805 2012 Metric Thin Film - Tape and Reel (Alt: RT0805BRD07470RL) RoHS : Compliant | 130,000 | |||
| RT0805BRD071ML | YAGEO Corporation | SMD Chip Resistor 1 MOhm 01 125 mW 0805 2012 Metric Thin Film - Tape and Reel (Alt: RT0805BRD071ML) RoHS : Compliant | 85,000 | |||
| RT0805BRD0733KL | YAGEO Corporation | SMD Chip Resistor 33 kOhm 01 125 mW 0805 2012 Metric Thin Film - Tape and Reel (Alt: RT0805BRD0733KL) RoHS : Compliant | 80,000 | |||
| RT0805BRD07100RL | YAGEO Corporation | SMD Chip Resistor 100 Ohm 01 125 mW 0805 2012 Metric Thin Film - Tape and Reel (Alt: RT0805BRD07100RL) RoHS : Compliant | 30,000 | |||
| RT0805BRD074K7L | YAGEO Corporation | SMD Chip Resistor 47 kOhm 01 125 mW 0805 2012 Metric Thin Film - Tape and Reel (Alt: RT0805BRD074K7L) RoHS : Compliant | 30,000 | |||
| CSTCR4M00G55B-R0 | Murata Manufacturing Co Ltd | Resonator 4 MHz SMD 3 Pin 60 ohm 05 CERALOCK CSTCR (Alt: CSTCR4M00G55B-R0) RoHS : Compliant | 24,000 | |||
| RT0805BRD0710KL | YAGEO Corporation | SMD Chip Resistor 10 kOhm 01 125 mW 0805 2012 Metric Thin Film - Tape and Reel (Alt: RT0805BRD0710KL) RoHS : Compliant | 15,000 | |||
| RT0805BRD0747KL | YAGEO Corporation | SMD Chip Resistor 47 kOhm 01 125 mW 0805 2012 Metric Thin Film - Tape and Reel (Alt: RT0805BRD0747KL) RoHS : Compliant | 10,000 | |||
| RT0805BRB07100RL | YAGEO Corporation | SMD Chip Resistor 100 Ohm 01 125 mW 0805 2012 Metric Thin Film - Tape and Reel (Alt: RT0805BRB07100RL) RoHS : Compliant | 5,000 | |||
| RT0805BRD0775KL | YAGEO Corporation | SMD Chip Resistor 75 kOhm 01 125 mW 0805 2012 Metric Thin Film - Tape and Reel (Alt: RT0805BRD0775KL) RoHS : Compliant | 5,000 | |||
| RT0805BRD073K6L | YAGEO Corporation | SMD Chip Resistor 36 kOhm 01 125 mW 0805 2012 Metric Thin Film - Tape and Reel (Alt: RT0805BRD073K6L) RoHS : Compliant | 5,000 | |||
| RT0805BRD071K5L | YAGEO Corporation | SMD Chip Resistor 15 kOhm 01 125 mW 0805 2012 Metric Thin Film - Tape and Reel (Alt: RT0805BRD071K5L) RoHS : Compliant | 5,000 | |||
| RT0805BRD0768KL | YAGEO Corporation | SMD Chip Resistor 68 kOhm 01 125 mW 0805 2012 Metric Thin Film - Tape and Reel (Alt: RT0805BRD0768KL) RoHS : Compliant | 5,000 | |||
| RT0805BRD072K2L | YAGEO Corporation | SMD Chip Resistor 22 kOhm 01 125 mW 0805 2012 Metric Thin Film - Tape and Reel (Alt: RT0805BRD072K2L) RoHS : Compliant | 5,000 | |||
Avnet Asia | CSTCR4M00G55B-R0 | Murata Manufacturing Co Ltd | Resonator, 4 MHz, SMD, 3 Pin, 60 ohm, ? 0.5%, CERALOCK CSTCR (Alt: CSTCR4M00G55B-R0) RoHS : Compliant | 0 | ||
| KGM15BR51C105MT | Kyocera AVX Components | (Alt: KGM15BR51C105MT) RoHS : Compliant | 0 | |||
| 1N5365BRLG | onsemi | 5 Watt Surmetic 40 Zener Voltage Regulators 36 V. ONSSPCDDECI9E6E; (Alt: 1N5365BRLG) RoHS : Compliant | 0 | |||
| KGM15BR51C474KT | Kyocera AVX Components | CAP CER 0.47UF 16V X5R 0603 (Alt: KGM15BR51C474KT) RoHS : Compliant | 0 | |||
| KGM15BR71H104JT | Kyocera AVX Components | SMD Multilayer Ceramic Capacitor, 0.1 uF, 50 V, 0603 [1608 Metric], ? 5%, X7R, 1.6 mm, 0.8 mm (Alt: KGM15BR71H104JT) RoHS : Compliant | 0 | |||
| KGM15BR71A105KT | Kyocera AVX Components | (Alt: KGM15BR71A105KT) RoHS : Compliant | 0 | |||
| KGM15BR51C105KT | Kyocera AVX Components | (Alt: KGM15BR51C105KT) RoHS : Compliant | 0 | |||
| KGM15BR71E104KT | Kyocera AVX Components | CAP CER 0.1UF 25V X7R 0603 (Alt: KGM15BR71E104KT) RoHS : Compliant | 0 | |||
| KGM15BR71H273KT | Kyocera AVX Components | MLCC - SMD/SMT 50V .027UF X7R 0603 (Alt: KGM15BR71H273KT) RoHS : Compliant | 0 | |||
| KAF15BR72A104KT | Kyocera AVX Components | (Alt: KAF15BR72A104KT) RoHS : Compliant | 0 | |||
| 1N5925BRLG | onsemi | 3.0 W Zener Diode Voltage Regulator 10 V. ONSSPCDDECI9E6E; (Alt: 1N5925BRLG) RoHS : Compliant | 0 | |||
| KGM15BR71E224KT | Kyocera AVX Components | (Alt: KGM15BR71E224KT) RoHS : Compliant | 0 | |||
| KGM15BR71H104KT | Kyocera AVX Components | (Alt: KGM15BR71H104KT) RoHS : Compliant | 0 | |||
| 1N5345BRLG | onsemi | 5 Watt Surmetic 40 Zener Voltage Regulators 8.7 V. ONSSPCDDECI9E6E; (Alt: 1N5345BRLG) RoHS : Compliant | 0 | |||
| KGM15BR50J475MT | Kyocera AVX Components | CAP,4.7UF,10%,X5R,6.3V,SMD0603,ROHS,HF (Alt: KGM15BR50J475MT) RoHS : Compliant | 0 | |||
 Avnet Silica | ZMM5265B _R1 _10001 | PanJit Semiconductor | (Alt: ZMM5265B_R1_10001) RoHS : Compliant | 27,500 | ||
| LPC845-BRK | NXP Semiconductors | Development Board LPC84x Series MCUs CMSISDAP Debug OnBoard MCUXpresso Compatible (Alt: LPC845-BRK) RoHS : Compliant | 0 | |||
| 1N5365BRLG | onsemi | 5 Watt Surmetic 40 Zener Voltage Regulators 36 V ONSSPCDDECI9E6E (Alt: 1N5365BRLG) RoHS : Compliant | 0 | |||
| 1N5375BRLG | onsemi | 5 Watt Surmetic 40 Zener Voltage Regulators 82 V ONSSPCDDECI9E6E (Alt: 1N5375BRLG) RoHS : Compliant | 0 | |||
| MIMXRT1052CVL5BR | NXP Semiconductors | Microprocessor 1 Core 32bit ARM CortexM7F 528 MHz MAPBGA 196 Pins (Alt: MIMXRT1052CVL5BR) RoHS : Compliant | 0 | |||
| MIMXRT1061CVJ5BR | NXP Semiconductors | Microprocessor 1 Cores 32bit ARM CortexM7 528 MHz MAPBGA 196 Pins (Alt: MIMXRT1061CVJ5BR) RoHS : Compliant | 0 | |||
| 1N5245B_ R2 _10001 | PanJit Semiconductor | (Alt: 1N5245B_R2_10001) RoHS : Compliant | 0 | |||
| ZMM5225B _R1 _10001 | PanJit Semiconductor | (Alt: ZMM5225B_R1_10001) RoHS : Compliant | 0 | |||
| GLZ7.5B _R1 _10001 | PanJit Semiconductor | (Alt: GLZ7.5B_R1_10001) RoHS : Compliant | 0 | |||
| MMSZ5225B _R1 _00001 | PanJit Semiconductor | (Alt: MMSZ5225B_R1_00001) RoHS : Compliant | 0 | |||
| MMSZ5245B _R1 _00001 | PanJit Semiconductor | (Alt: MMSZ5245B_R1_00001) RoHS : Compliant | 0 | |||
| MMBZ5235B _R1 _00001 | PanJit Semiconductor | (Alt: MMBZ5235B_R1_00001) RoHS : Compliant | 0 | |||
| MMBZ5235B_ R2 _00001 | PanJit Semiconductor | (Alt: MMBZ5235B_R2_00001) RoHS : Compliant | 0 | |||
| GLZJ7.5B_ R2 _10001 | PanJit Semiconductor | (Alt: GLZJ7.5B_R2_10001) RoHS : Compliant | 0 | |||
| MCS1823GQTE-305BRN23-Z | Monolithic Power Systems | (Alt: MCS1823GQTE-305BRN23-Z) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AMA5BR3L-120050Y | Aimtec |
| 0 | ||
| AMA5BR5-050100Y | Aimtec |
| 0 | |||
| AMA65BR5L-120500Y | Aimtec |
| 0 | |||
| AMA5BR2L-033160Y | Aimtec |
| 0 | |||
| AMA5BR5L-120050Y | Aimtec |
| 0 | |||
| AMA5BR4-120050Y | Aimtec |
| 0 | |||
| AMA65BR4-120500Y | Aimtec |
| 0 | |||
| AMA5BR5L-050100Y | Aimtec |
| 0 | |||
| AMA5BR1-033160Y | Aimtec |
| 0 | |||
| AMA5BR3L-033160Y | Aimtec |
| 0 | |||
| AMA5BR4L-050100Y | Aimtec |
| 0 | |||
| UL865BRR209T001000 | Telit | UL865-BR MODULE 12.00.659 |
| 0 | ||
| AMA5BR1L-050100Y | Aimtec |
| 0 | |||
| AMA65BR4L-240200Y | Aimtec |
| 0 | |||
| AMA5BR2L-120050Y | Aimtec |
| 0 | |||
 DB Roberts | FLWM5-BRA | FLAT WASHER | Flat Washer BRASS |
| 21,567 | |
| HXNM5-BRA | HEX NUT | Hex Nut |
| 14,038 | ||
| FLW.084X.156X.025-BRA-CY | FLAT WASHER | Flat Washer BRASS |
| 1,140 | ||
| FLW.380X.600X.125-BRA | FLAT WASHER | Flat Washer BRASS |
| 404 | ||
| DIN6799-M5-BRZ | DIN HARDWARE | RETAINING RING BRONZE |
| 174 | ||
| 6075-5BR111 | Dodge | ULTRASERT II - METRIC |
| 40 | ||
| FLW.156X.312X.035-BRA-TIN | FLAT WASHER | Flat Washer BRASS |
| 26 | ||
| HG-MA95B-R | Sugatsune Kogyo Co Ltd | 0 | ||||
| 6035-5BR562 | Dodge | ULTRASERT II - INCH | 0 | |||
| 6041-5BR335 | Dodge | ULTRASERT II - INCH | 0 | |||
| 6675-5BR095 | Dodge | 0 | ||||
| 6075-5BR067 | Avdel | 6075-5BR067 B5K | 0 | |||
| HK-CH35-BR | Sugatsune Kogyo Co Ltd | COUNTER HOOK BROWN | 0 | |||
| SPL94035BR | Spiralock | M4X0.7 SPL Ultrasonic Insert | 0 | |||
| 6675-2.5BR057 | Dodge | U-III M2.5X0.45 | 0 | |||
 EBV Elektronik | 1N5345BRLG | onsemi | 5 Watt Surmetic 40 Zener Voltage Regulators 87 V ONSSPCDDECI9E6E (Alt: 1N5345BRLG) RoHS : Compliant | 4,000 | ||
| ICE5BR4780BZXKLA1 | Infineon Technologies AG | AC DC Controller 104V to 27V Flyback 7Pin DIP Tube (Alt: SP005566776) RoHS : Compliant | 2,000 | |||
| ICE5BR2280BZXKLA1 | Infineon Technologies AG | AC DC Controller 104V to 27V Flyback 7Pin DIP Tube (Alt: SP005566780) RoHS : Compliant | 2,000 | |||
| 1N5365BRLG | onsemi | 5 Watt Surmetic 40 Zener Voltage Regulators 36 V ONSSPCDDECI9E6E (Alt: 1N5365BRLG) RoHS : Compliant | 0 | |||
| 1N5375BRLG | onsemi | 5 Watt Surmetic 40 Zener Voltage Regulators 82 V ONSSPCDDECI9E6E (Alt: 1N5375BRLG) RoHS : Compliant | 0 | |||
| 1N5925BRLG | onsemi | 30 W Zener Diode Voltage Regulator 10 V ONSSPCDDECI9E6E (Alt: 1N5925BRLG) RoHS : Compliant | 0 | |||
| 1N5335BRLG | onsemi | 5 Watt Surmetic 40 Zener Voltage Regulators 39 V ONSSPCDDECI9E6E (Alt: 1N5335BRLG) RoHS : Compliant | 0 | |||
| UDZS15B R9G | Taiwan Semiconductor | Diode Zener Single 15V 2 02W 2Pin SOD323F Plastic TR (Alt: UDZS15B R9G) RoHS : Compliant | 0 | |||
| UDZS7V5B RRG | Taiwan Semiconductor | Diode Zener Single 75V 2 02W 2Pin SOD323F Plastic TR (Alt: UDZS7V5B RRG) RoHS : Compliant | 0 | |||
| MMSZ5235B RHG | Taiwan Semiconductor | (Alt: MMSZ5235B RHG) RoHS : Compliant | 0 | |||
| MCIMX355AVM5BR2 | NXP Semiconductors | (Alt: MCIMX355AVM5BR2) RoHS : Compliant | 0 | |||
| MIMXRT1052CVL5BR | NXP Semiconductors | Microprocessor 1 Core 32bit ARM CortexM7F 528 MHz MAPBGA 196 Pins (Alt: MIMXRT1052CVL5BR) RoHS : Compliant | 0 | |||
| MIMXRT1061CVJ5BR | NXP Semiconductors | Microprocessor 1 Cores 32bit ARM CortexM7 528 MHz MAPBGA 196 Pins (Alt: MIMXRT1061CVJ5BR) RoHS : Compliant | 0 | |||
| MIMXRT1062CVJ5BR | NXP Semiconductors | Microprocessor 1 Cores 32bit ARM CortexM7 528 MHz MAPBGA 196 Pins (Alt: MIMXRT1062CVJ5BR) RoHS : Compliant | 0 | |||
| C13555_BRIDGET-W-UNI | LEDIL | Hexag Reflector for BXRA ES StarSLE G5 LES6SLE G5 LES11CXM9CLU700 LEDs (Alt: C13555_BRIDGET-W-UNI) RoHS : Compliant | 0 | |||
 Flip Electronics | MCIMX355AVM5BR2 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 28,000 | ||
| 1N5375BRLG | onsemi | Stock, Ship Today RoHS : Compliant | 3,750 | |||
| 1N5365BRLG | onsemi | Stock, Ship Today RoHS : Compliant | 3,340 | |||
| MCIMX357DVM5BR2 | NXP Semiconductors | Stock RoHS : Compliant | 2,950 | |||
| MCIMX357CVM5BR2 | NXP Semiconductors | Stock | 2,950 | |||
| IDT83115BRLF | Integrated Device Technology Inc | Stock | 1,108 | |||
83115BRLF | Integrated Device Technology Inc | Stock, Ship Today RoHS : Compliant | 1,108 | |||
| ICS83115BRLF | Integrated Device Technology Inc | Stock RoHS : Compliant | 1,108 | |||
| LPC845-BRK | NXP Semiconductors | Stock | 830 | |||
| MIMXRT1052CVL5BR | NXP Semiconductors | Stock RoHS : Compliant | 455 | |||
 Maritex | K5B RH 3.5X6X1.5 | King Core Electronics Inc | Ferrite sleeve; EMI-RHW-3.5x6x1.5 |
| 10,100 | |
| TACTD45H055BR180 | Innocent Electronics Co Ltd | Tact Switch; SMD; dimensions 4.5x4.8; h=0.55mm; vertical; operating force 180gf; button: round |
| 6,691 | ||
| MMSZ5255B_R1_00301 | PanJit Semiconductor | Zener Diodes; MMSZ5255B_R1_00301; PANJIT |
| 6,000 | ||
| K5B RH 3.5X4.5X0.8-T52 | King Core Electronics Inc | Miniature ferrite bead EMI-RHW-3; 5x4; 5 5k |
| 5,000 | ||
| GLZ15B_R1_10001 | PanJit Semiconductor | Zener Diodes; GLZ15B_R1_10001; PANJIT; 2; 500 mW; 15 V; 200 nA RoHS : Compliant |
| 2,500 | ||
| K5B-R6H1.5TS*2 /ROHS | Jantek Electronics Co. | Suppressor EMI; R6H1T5x; 2x1.5 turns; SMD |
| 2,306 | ||
| K5B R6H 6X10-3TS | King Core Electronics Inc | EMI suppressor; radial; 3 turns; EMI-R6H3T0; Z1=29Ohm; Z2=47OhM; Imax=6A |
| 1,800 | ||
| K5B RH 10X10X6 /ROHS | King Core Electronics Inc | Toroidal Ferrite; 6.0mm; Z=40Ohm (25MHz); Z=80Ohm (100MHz) |
| 1,781 | ||
| K5B RC 10X20X5-MB | King Core Electronics Inc | Ferrite EMI core for round cables EMI JMLF50, Z=80Ohm; Z=140Ohm |
| 1,672 | ||
| K5B RH 3.5X6X0.8-T52 | King Core Electronics Inc | Miniature ferrite bead; EMI-RHW-3; 5x6 |
| 815 | ||
| C13555_BRIDGET-W-UNI | LEDIL | Reflector BRIDGET-W-UNI-C13555, diameter: 23mm, heigh: 12.8mm, for LED COB, FWHM: ab.60 deg., wide beam, PC, Ledil |
| 293 | ||
| TACTD42H075BR250-CT | CONNTHERM | Tact Switch; SMD; dimensions 3x3; h=0.75mm; vertical; operating force 250gf; button: round |
| 96 | ||
| M3225BR-LN | BEISIT | Cabel gland M25; Nickel-plated Brass; M25x1.5 18-25mm; Flat O-ring; with lock nut; for wrench 40 |
| 50 | ||
| M25BR-LN | BEISIT | Lock nut for M25 cable gland;nickel plated brass; for wrench 29; depth 3.5mm; |
| 4 | ||
| EX-M3225BR-LN | BEISIT | Cabel gland M25; Nickel-plated Brass; M25x1.5 18-25mm; Flat O-ring; with lock nut; for wrench 40 |
| 2 | ||
 Master Electronics | AT-1225-BR | Sealcon USA | Nickel Plated Brass Thread Adapter 1/2 NPT to M25 x 1.5 Threads RoHS : Compliant |
| 217 | |
| G4020E05B-RSR | Mechatronics Fan Group | G4020 Series DC Axial Fans RoHS : Compliant |
| 52 | ||
| HLCD-20-03.25-BR-TR-3 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HLCD-30-04.25-BR-BR-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HLCD-40-02.05-BRS-TH-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HLCD-40-02.75-BR-TR-3 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| R88ACAGB0015BRE | OMRON Industrial Automation | Cable Assembly Motor Power Cables 1.5m RoHS : Compliant |
| 0 | ||
| R88ACAKA005BRE | OMRON Industrial Automation | Cable Assembly Brake Cable 5m RoHS : Compliant |
| 0 | ||
| DA105-BR-B | Carling Technologies | D-SERIES TOGGLE SWITCH RoHS : Compliant |
| 0 | ||
| HLCD-30-02.25-BR-TH-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HLCD-30-04.25-BR-TR-3 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HLCD-50-03.75-BR-TR-3 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 7035-BR001 | Alpha Wire | Hook-up Wire - Stranded - 14 (19/27) AWG - PVC Brown - 1000 ft - Tinned Copper RoHS : Compliant |
| 0 | ||
| R88ACAGB015BRE | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| HLCD-20-15.75-BR-BH-3 | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Neutron USA | MDS-005AAS05 BR | Delta Electronics Inc | Wall Mount AC Adapters Wall Mount Adapter 5V, 5W |
| 50 | |
| NHD-1.5-BREAKOUT | Newhaven Display International | Breakout board for 1.5" Color OLED Glass |
| 50 | ||
| JPM455B-R2 | Black Box Corporation | LOW-DENSITY MULTIMODE FIBER ADAPTER PANEL - CERAMIC SLEEVE, (6) LC DUPLEX, BEIGE |
| 36 | ||
| 25BR15-B-1-24C | Grayhill Inc | Encoders 25BR15-B-1-24C |
| 18 | ||
| 25BR22-B-1-16F | Grayhill Inc | ROTARY ENCODER MECHANICAL 16PPR RoHS : Compliant |
| 11 | ||
| 25BR18-G-1-20F | Grayhill Inc | Encoders Encoder, Rear-facing terminals, 18°, gray, 1 deck, 24 positions, fixed stop RoHS : Compliant |
| 4 | ||
| 1555 BR005 | Alpha Wire | Hook-up Wire 18AWG 16/30 PVC 100ft SPOOL BROWN |
| 2 | ||
| CF-775B-RS | iEi Integration Corporation | High Performance 1U LGA 775 CPU Cooler |
| 2 | ||
 Pasternack Enterprises US | PE3C8875/BR | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BR, RF Cable Type: Belden 1855A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1855A-BR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-BR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8875/BR, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8875/BR is built with Belden 1855A-BR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-BR coax. | 255 | ||
| PE3C8815/BR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BR, RF Cable Type: Belden 1694A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-BR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-BR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/BR-72, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/BR-72 is built with Belden 1694A-BR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/BR-72 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-BR coax. |
| 211 | ||
| PE3C8815/BR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BR, RF Cable Type: Belden 1694A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-BR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-BR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/BR-36, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/BR-36 is built with Belden 1694A-BR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/BR-36 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-BR coax. |
| 211 | ||
| PE3C8815/BR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BR, RF Cable Type: Belden 1694A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-BR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-BR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/BR-12, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/BR-12 is built with Belden 1694A-BR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/BR-12 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-BR coax. |
| 211 | ||
| PE3C8815/BR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BR, RF Cable Type: Belden 1694A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-BR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/BR-120, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/BR-120 is built with Belden 1694A-BR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/BR-120 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BR coax. |
| 162 | ||
| PE3C8875/BR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BR, RF Cable Type: Belden 1855A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-BR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-BR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/BR-12, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/BR-12 is built with Belden 1855A-BR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-BR coax. |
| 51 | ||
| PE3C8875/BR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BR, RF Cable Type: Belden 1855A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-BR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-BR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/BR-300, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/BR-300 is built with Belden 1855A-BR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-BR coax. |
| 51 | ||
| PE3C8875/BR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BR, RF Cable Type: Belden 1855A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-BR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-BR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/BR-36, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/BR-36 is built with Belden 1855A-BR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-BR coax. |
| 51 | ||
| PE3C8875/BR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BR, RF Cable Type: Belden 1855A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-BR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-BR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/BR-72, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/BR-72 is built with Belden 1855A-BR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-BR coax. |
| 51 | ||
| PE3C8875/BR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BR, RF Cable Type: Belden 1855A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-BR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-BR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/BR-120, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/BR-120 is built with Belden 1855A-BR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-BR coax. |
| 51 | ||
| PE3W02525/BR/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using RG225 with HeatShrink. PE3W02525/BR/HS is a BNC male to BNC male cable using RG225 coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02525/BR/HS BNC male to BNC male cable assembly is constructed with RG225 coax. | 0 | |||
| PE3W15985/BR | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Female Cable Using RG225. PE3W15985/BR is a 7/16 DIN male to 7/16 DIN female cable using RG225 coax. This Pasternack 7/16 DIN male to 7/16 DIN female cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 7/16 DIN to female 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15985/BR 7/16 DIN male to 7/16 DIN female cable assembly is constructed with RG225 coax. | 0 | |||
| PE3W23645/BR | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. N Male to SHV Jack Bulkhead Cable Using RG225. PE3W23645/BR is a N male to SHV jack bulkhead cable using RG225 coax. This Pasternack N male to SHV jack bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SHV for connector 2. Our male N to jack SHV bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W23645/BR N male to SHV jack bulkhead cable assembly is constructed with RG225 coax. | 0 | |||
| PE3W21335/BR | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to N Female Cable Using RG225. PE3W21335/BR is a 7/16 DIN male to N female cable using RG225 coax. This Pasternack 7/16 DIN male to N female cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm N for connector 2. Our male 7/16 DIN to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21335/BR 7/16 DIN male to N female cable assembly is constructed with RG225 coax. | 0 | |||
| PE3W17405/BR | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. N Female 4 Hole Flange to SC Male Cable Using RG225. PE3W17405/BR is a N female 4 hole flange to SC male cable using RG225 coax. This Pasternack N female 4 hole flange to SC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SC for connector 2. Our female N 4 hole flange to male SC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17405/BR N female 4 hole flange to SC male cable assembly is constructed with RG225 coax. | 0 | |||
 Teledyne HiRel | M38510/75705BRA | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | ||
| M38510/34105BRA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
 Vyrian | GW5BRF15L0B | Sharp Corporation | Single Color LED Display Cluster, White, 3mm | 12,380 | ||
| AD7945BR-REEL | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.6us Settling Time, PDSO20 RoHS : Not Compliant | 11,842 | |||
| AD5245BRJZ10-R2 | Analog Devices Inc | Digital Potentiometer, 1 Func, 10000ohm, 2-wire Serial Control Interface, 256 Positions, PDSO8 RoHS : Compliant | 11,459 | |||
| AD7825BR | Analog Devices Inc | ADC, Flash Method, 8-Bit, 1 Func, 4 Channel, Parallel, 8 Bits Access, CMOS, PDSO24 RoHS : Not Compliant | 10,445 | |||
| ADG3245BRU-REEL7 | Analog Devices Inc | Bus Driver, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Not Compliant | 8,919 | |||
| ADT75BRMZ-REEL | Analog Devices Inc | Serial Switch/Digital Sensor, 12 Bit(s), 3Cel, Square, 8 Pin, Surface Mount RoHS : Compliant | 8,814 | |||
| AD9835BRUZ | Analog Devices Inc | Numeric Controlled Oscillator, 1-Bit, CMOS, PDSO16 RoHS : Compliant | 6,860 | |||
| ADM2485BRWZ-RL | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO16 RoHS : Compliant | 6,525 | |||
| AD9235BRUZRL7-20 | Analog Devices Inc | ADC, Proprietary Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, PDSO28 RoHS : Compliant | 6,226 | |||
| AD7785BRUZ | Analog Devices Inc | ADC, Delta-Sigma, 20-Bit, 1 Func, 3 Channel, Serial Access, PDSO16 RoHS : Compliant | 6,098 | |||
| AD8475BRMZ-RL | Analog Devices Inc | Operational Amplifier, 1 Func, 200uV Offset-Max, PDSO10 RoHS : Compliant | 5,598 | |||
| AD96685BRZ | Analog Devices Inc | Comparator, 1 Func, 3000uV Offset-Max, 2.5ns Response Time, BIPolar, PDSO16 RoHS : Compliant | 5,296 | |||
| MFP-25BRD52-12K | YAGEO Corporation | Fixed Resistor, Metal Film, 0.25W, 12000ohm, 250V, 0.1% +/-Tol, 20ppm/Cel, Through Hole Mount RoHS : Compliant | 4,865 | |||
DS125BR800SQ/NOPB | Texas Instruments | Line Transceiver, 4 Func, 4 Rcvr, PQCC54 RoHS : Compliant | 4,666 | |||
| D55342E07B165BR | Vishay Dale | Fixed Resistor, Thin Film, 0.25W, 165000ohm, 100V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 1206 | 304 | |||
 Waytek, Inc. | 16/1 UL1015 BROWN | Unified Wire and Cable Inc | 16GA Brown MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 23,000 | |
| 12/1 UL1015 BROWN | Unified Wire and Cable Inc | 12GA Brown MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 10,250 | ||
| 18/1 UL1015 BROWN | Unified Wire and Cable Inc | 18GA Brown MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 6,250 | ||
| 14/1 UL1015 BROWN | Unified Wire and Cable Inc | 14GA Brown MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 5,250 | ||
| 26505-BRL | FTZ Industries | FTZ Industries 26505-BRL PVC heat shrink tubing is black spool-packed tubing with a 2:1 shrink ratio for wire, terminal, and splice protection. Its flexible PVC construction and 1,000 ft spool format support durable insulation, abrasion resistance, and high-volume harness production work. |
| 0 | ||
 Win Source Electronics | CSTCR4M00G55B-R0 | Murata Manufacturing Co Ltd | CER RES 4.0000MHZ 39PF SMD RoHS : Compliant |
| 30,000 | |
| ADUM1285BRZ | Analog Devices Inc | DGTL ISO 3KV 2CH GEN PURP 8SOIC / 3 kV RMS Dual Channel Digital Isolators RoHS : Compliant |
| 24,500 | ||
| AD5245BRJ10-R2 | Analog Devices Inc | 256-Position I2C Compatible Digital Potentiometer / Digital Potentiometer 10kOhm 256POS Volatile Automotive 8-Pin SOT-23 T/R RoHS : Not Compliant |
| 18,600 | ||
| ADR5045BRTZ-REEL7 | Analog Devices Inc | IC VREF SHUNT 5V SOT23-3 RoHS : Compliant |
| 13,950 | ||
| AD5245BRJZ10-R2 | Analog Devices Inc | IC DGTL POT 256POS SOT23-8 RoHS : Compliant |
| 12,995 | ||
| ADT75BRMZ-REEL | Analog Devices Inc | SENSOR TEMP I2C/SMBUS 8MSOP RoHS : Compliant |
| 11,370 | ||
DS25BR110TSD/NOPB | Texas Instruments | IC REDRIVER LVDS 1CH 8WSON RoHS : Compliant |
| 4,500 | ||
| ADR435BR | Analog Devices Inc | IC VREF SERIES 5V 8-SOIC / Voltage Reference IC V 8-SOIC RoHS : Not Compliant |
| 4,123 | ||
| AD7785BRUZ | Analog Devices Inc | IC ADC 20BIT SIGMA-DELTA 16TSSOP RoHS : Compliant |
| 3,000 | ||
| AD7685BRMZRL7 | Analog Devices Inc | 1-Channel Single ADC SAR 250ksps 16-bit Serial 10-Pin MSOP T/R / IC ADC 16BIT PSEUDO-DIFF 10-MSOP RoHS : Compliant |
| 2,740 | ||
| AD96685BRZ | Analog Devices Inc | IC COMP SNGL ULTRA-FAST 16-SOIC RoHS : Compliant |
| 1,604 | ||
| AD7945BRZ | Analog Devices Inc | +3.3 V/+5 V Multiplying 12-Bit DACs | IC DAC 12BIT A-OUT 20SOIC RoHS : Compliant |
| 1,500 | ||
| AD9235BRUZ-65 | Analog Devices Inc | IC ADC 12BIT 65MSPS 28-TSSOP RoHS : Compliant |
| 1,400 | ||
| AD9835BRUZ | Analog Devices Inc | 50 MHz Direct Digital Synthesizer, Waveform Generator RoHS : Compliant |
| 309 | ||
AD5625BRUZ | Analog Devices Inc | Quad, 12-/14-/16-Bit nanoDACs with 5ppm/°C On-chip Ref, I2C Interface RoHS : Compliant |
| 110 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand