| Electronic Components Datasheet Search |
|
410HTTDR10 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 67997-410HLF | Amphenol Communications Solutions | Connector: pin strips; pin header; male; data; PIN: 10; THT; 2.54mm RoHS : Compliant |
| 5,556 | |
| 68422-410HLF | Amphenol Corporation | Connector: pin strips; pin header; male; data; PIN: 10; 5A; 110V |
| 2,300 | ||
| SF-2410HI250T-2 | Bourns Inc | Fuse: fuse; SMD; 125VAC; medium time-lag; 2410; soldering pads RoHS : Compliant |
| 1,848 | ||
| 68020-410HLF | Amphenol Corporation | Connector: pin strips; pin header; male; data; PIN: 10; soldering |
| 896 | ||
| 69168-410HLF | Amphenol Corporation | Connector: wire-board; male; data; PIN: 10; shrouded; 2.54mm; tinned |
| 783 | ||
| 68602-410HLF | Amphenol Corporation | Connector: pin strips; pin header; male; data; PIN: 10; soldering |
| 708 | ||
| 78548-410HLF | Amphenol Corporation | Connector: pin strips; pin header; male; data; PIN: 10; soldering |
| 204 | ||
| A-10-6-BG410-HD1Z-FC-AGZ-ZW | WIKA Instrument LP | Converter: pressure; 0÷10bar; Usup: 14÷30VDC; relative pressure |
| 18 | ||
| A-10-6-BG410-HD1Z-AA-M4Z-ZW | WIKA Instrument LP | Converter: pressure; 0÷10bar; 8÷30VDC; 4÷20mA; relative pressure |
| 4 | ||
| BFP410H6327XTSA1 | Infineon Technologies AG | Transistor: NPN; bipolar; 4.5V; 40mA; 150mW; SOT343 RoHS : Compliant |
| 0 | ||
| CWA2410H | Crydom Inc | Relay: solid state; Ucntrl: 90÷280VAC; 10A; 24÷280VAC; CW; 1-phase RoHS : Compliant |
| 0 | ||
| CWD2410H | Crydom Inc | Relay: solid state; Ucntrl: 3÷32VDC; 10A; 24÷280VAC; CW; 1-phase RoHS : Compliant |
| 0 | ||
| BZG04-10-HM3-08 | Vishay Intertechnologies | Diode: Zener; 3W; 12V; SMD; DO214AC,SMA; single diode RoHS : Compliant |
| 0 | ||
| M410-HOOK | Brady Worldwide Inc | Holder; with belt; thermal transfer printer |
| 0 | ||
| M410-HC | Brady Worldwide Inc | Chest; thermal transfer printer |
| 0 | ||
![]() Avnet Americas | UE27AE5410H | Amphenol Corporation | - Trays (Alt: UE27AE5410H) RoHS : Compliant |
| 17,174 | |
| 67997-410HLF | Amphenol Corporation | Pin Header, Board-to-Board, 2.54 mm, 2 Rows, 10 Contacts, Through Hole, FCI BergStik 67997 - Bulk (Alt: 67997-410HLF) RoHS : Compliant |
| 8,985 | ||
| SF-2410HI400T-2 | Bourns Inc | SMD Fuse, High Inrush Current Withstand, 4 A, 125 VAC, 125 VDC, 2410 [6125 Metric], SF-2410HI-T - Tape and Reel (Alt: SF-2410HI400T-2) RoHS : Compliant |
| 6,000 | ||
| UE27BE5410H | Amphenol Corporation | - Trays (Alt: UE27BE5410H) RoHS : Compliant |
| 4,000 | ||
| 68602-410HLF | Amphenol Corporation | - Bag (Alt: 68602-410HLF) RoHS : Compliant |
| 3,200 | ||
| GBU410_HF | Diodes Incorporated | Bridge Rectifier, Single Phase, 1 kV, 4 A, 1 V, GBU, 4 Pins - Rail/Tube (Alt: GBU410_HF) RoHS : Compliant |
| 13 | ||
| 390DA002B1410H | Glenair Inc | - Bulk (Alt: 390DA002B1410H) RoHS : Not Compliant |
| 0 | ||
| 390FA007B1410H | Glenair Inc | - Bulk (Alt: 390FA007B1410H) RoHS : Not Compliant | 0 | |||
| 390FS002NF1410H4 | Glenair Inc | - Bulk (Alt: 390FS002NF1410H4) RoHS : Not Compliant |
| 0 | ||
| SF-2410HI250T-2 | Bourns Inc | SMD Fuse, High Inrush Current Withstand, 2.5 A, 125 VAC, 125 VDC, 2410 [6125 Metric], SF-2410HI-T - Tape and Reel (Alt: SF-2410HI250T-2) RoHS : Compliant |
| 0 | ||
| SF-2410HI700T-2 | Bourns Inc | SMD Fuse, High Inrush Current Withstand, 7 A, 125 VAC, 125 VDC, 2410 [6125 Metric], SF-2410HI-T - Tape and Reel (Alt: SF-2410HI700T-2) RoHS : Compliant |
| 0 | ||
| TW-04-10-H-T-280-090 | Samtec Inc | Board Stackers & Spacers, Pin Header, 7.11 mm, 12 Contacts, Solder, 3 Rows, 2 mm, TW Series - Bulk (Alt: TW-04-10-H-T-280-090) RoHS : Compliant |
| 0 | ||
| UE27AE5410H01 | Amphenol Corporation | QSFP Cage Assembly 1-Port Copper Alloy Tray - Trays (Alt: UE27AE5410H01) RoHS : Not Compliant |
| 0 | ||
| RJE051AA1410H | Amphenol Corporation | - Tape and Reel (Alt: RJE051AA1410H) RoHS : Not Compliant |
| 0 | ||
| M39003/01-5410H | Vishay Intertechnologies | Tantalum Capacitor, 4.7 uF, 10 V, ? 5%, Axial Leaded, R, 3.43 mm, 7.26 mm - Bulk (Alt: M39003/01-5410H) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 67997-410HLF | Amphenol Communications Solutions | Connector, Header, 10Pos, 2Row, 2.54Mm; |Amphenol Communications Solutions 67997-410HLF RoHS : Compliant |
| 5,913 | |
| 67996-410HLF | Amphenol Communications Solutions | Conn, Header, 10Pos, 2Row, 2.54Mm, Th; |Amphenol Communications Solutions 67996-410HLF RoHS : Compliant |
| 40 | ||
| M410 HHA2SCS100- | TR Fastenings | Hex Set, S/S, A2, M4X10, Pk100; |Tr Fastenings M410 HHA2SCS100- RoHS : Compliant |
| 40 | ||
| V410-HDS4608SR | OMRON Industrial Automation | Barcode Reader, Handheld, Wired; |Omron Industrial Automation V410-HDS4608SR RoHS : Compliant |
| 28 | ||
| HJ161410HLP | Hammond Manufacturing | Metal Enclosure, Continuous Hinge Door; |Hammond HJ161410HLP RoHS : Compliant |
| 15 | ||
| M4 10 HS45KC S50 | TR Fastenings | Set Screw Socket, Kcp, M4X10, Pk50; |Tr Fastenings M4 10 HS45KC S50 RoHS : Compliant |
| 9 | ||
| 2410HR-0.5 | Videk Ltd | Cable, Hdmi Plug-Plug, 500Mm; |Videk 2410HR-0.5 RoHS : Compliant |
| 6 | ||
| FN2410H-60-34 | TE Connectivity | Power Line Filter, 1-Phase, 60A, 520Vac; Filter Applications:General Purpose; Voltage Rating:520Vac; Current Rating:60A; No. Of Phases:Single Phase; No. Of Stages:1 Stage; Filter Input Terminals:Terminal Block Rohs Compliant: Yes RoHS : Compliant |
| 5 | ||
| V410-HDS4608XD | OMRON Industrial Automation | Barcode Reader, Handheld, Wired; |Omron Industrial Automation V410-HDS4608XD RoHS : Compliant |
| 5 | ||
| CC174-10HR | L-com Inc | Ca Bnc M/Bnc M Ra Rg174/U 10; |L-Com CC174-10HR RoHS : Not Compliant |
| 4 | ||
| CC174-10HR2 | L-com Inc | Cbl Assy, Bnc R/A Plug-Bnc R/A Plug; |L-Com CC174-10HR2 RoHS : Compliant |
| 4 | ||
| C3R302410HCR | Hammond Manufacturing | Metal Enclosure, Wall Mnt; |Hammond C3R302410HCR RoHS : Compliant |
| 3 | ||
| V410-HDS4608HC | OMRON Industrial Automation | Hand Scnr Hc, White, Led, Wired; |Omron Industrial Automation V410-HDS4608HC RoHS : Compliant |
| 3 | ||
| 2410HQF-5 | Videk Ltd | Cable, Flat Hdmi Plug-Plug, 5M, Blk; |Videk 2410HQF-5 RoHS : Compliant |
| 1 | ||
| DAT72410-HR | Cynergy3 Components | Reed Relay, Spst-No, 24Vdc, 2A, Th; |Sensata/cynergy3 DAT72410-HR RoHS : Compliant |
| 1 | ||
![]() RS | UE27-AE54-10H | Amphenol Commercial | CONNECTOR USB TERMINAL 4 PHOSPHOR BRONZE GOLD COPPER ALLOY NICKEL PCBS |
| 1,778 | |
| RJE09-288-0410-H | Amphenol Commercial | CONNECTOR, 8P8C, NO SHIELD, NO FILTER, TWOPORT |
| 1,295 | ||
| P2410HCCT | Cinch Connectivity Solutions | CONNECTOR JONES PLUG WITH CABLE CLAMP TOP SOLDER EYELETS POLARIZED 10 CONTACT |
| 1,241 | ||
| 69190-410HLF | Amphenol FCi | CONN;RECT;HEADER;10CNTS;BERGII;2.54MMSPNG;VERT;SINGLEROW RoHS : Compliant |
| 647 | ||
| FN2410H-16-44 (802214) | TE Connectivity | EMC/RFI FILTER 1-PH 16A 520VAC SAFETY CHASSIS HIGH VOLTAGE FN 2410 SERIES |
| 18 | ||
| 410H100 | Gates | POWERGRIP TIMING BELT |
| 7 | ||
| V410-HDS4608HC | OMRON Industrial Automation | HANDHELD BARCODE SCANNER, HEALTH CARE, 1D/2D CODES, NO CORD, V410-H SERIES |
| 4 | ||
| E510-410-H3-U (JNE510-410-H3-U) | TECO-Westinghouse Motor Company | VFD DRIVE,3-PH 460V IN,460V 3-PH OUT, NEMA 1,6 DI/2 DO/2 AI/1 AO WITH LOGIC |
| 4 | ||
| A24R2410HCR | nVent Hoffman | TYPE 3R ENCLOSURE, HNG COVER, 24.00X24.00X10.00, STEEL |
| 3 | ||
| 2454045 (25533410) (HFI504302250NA-025RS) | RS Pro | 7/16-20 X 2 1/4 IN HEX HEAD CAP SCREW, GRADE 5, ZINC PLATED, FINE |
| 3 | ||
| V410-HDS4608XD | OMRON Industrial Automation | HANDHELD BARCODE SCANNER, WITH X-MODE, 1D/2D CODES, NO CORD, V410-H SERIES |
| 1 | ||
| FN2410H-25-33 | TE Connectivity | SINGLE PHASE CHASSIS MOUNT 25 A FILTER SAFETY TERMINAL BLOCK HIGH VOLTAGE RoHS : Compliant |
| 0 | ||
| E510-410-H3N4-U (JNE510-410-H3N4-U) | TECO-Westinghouse Motor Company | VFD DRIVE,3-PH 460V IN,460V 3-PH OUT, NEMA 4/4X, W/O DISCONNECT,6DI/2DO/2AI/1AO |
| 0 | ||
| E510-410-H3FN4SU (JNE510-410-H3FN4SU) | TECO-Westinghouse Motor Company | VFD DRIVE,1-PH 230V IN,230V 3-PH OUT, NEMA 4/4X, WITH DISCONNECT,6DI/2DO/2AI/1AO |
| 0 | ||
| BA3-B0-32-620-522-C (BA3B034410HB1C | BA3-B0-34-410-HB1-C | BA3B034410HB1C) | Carling Technologies | CIRCUIT BREAKER, B-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
![]() STMicroelectronics | T410H-6T![]() | STMicroelectronics | 4 A - 600 V - 150 °C logic level H-series Triac in TO-220AB RoHS : Compliant |
| 0 | |
![]() Microchip Technology Inc | DSPIC33CK512MP410-H/PT | Microchip Technology Inc | dsPIC33C 100MHz, 512K Dual Panel Flash, 128K RAM, OpAmps, 12bit ADCs, PWM, TQFP, Projected EOL: 2051-03-06 RoHS : Compliant |
| 0 | |
| DSPIC33CK256MP410-H/PT | Microchip Technology Inc | dsPIC33C 100MHz, 256K Dual Panel Flash, 128K RAM, OpAmps, 12bit ADCs, PWM, TQFP, Projected EOL: 2051-03-06 RoHS : Compliant |
| 0 | ||
| DSPIC33CK1024MP410-H/PT | Microchip Technology Inc | dsPIC33C 100MHz, 1024K Dual Panel Flash, 128K RAM, OpAmps, 12bit ADCs, PWM, TQFP, Projected EOL: 2051-03-06 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 1410HSS500-12A | Accurate Screw Machine | 25 | |||
| 3/4-10HVY 2H A194 XYL | BOLTS | 20 | ||||
| 3/4-10HVY A194 PL | NUTS | 1 | ||||
![]() Rochester Electronics | SC33FS8410HCES | NXP Semiconductors | Specialized Power Management System Basis Chip RoHS : Compliant |
| 3,120 | |
| BFP410H6327XTSA1 | Infineon Technologies AG | RF BJT Single 4.5V 40mA SOT-343 T/R RoHS : Compliant |
| 11,418 | ||
![]() Sager | TMR3-2410HI![]() | Traco Power | Isolated DC/DC Converters - Through Hole RoHS : Compliant |
| 160 | |
| FN2410H-25-33 | TE Connectivity | Power Line Filters FN2410H-25/33 RoHS : Compliant |
| 0 | ||
| TW-04-10-H-T-280-090 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 0 | ||
| V410-HHANDSCNRHC.BLU/WH | OMRON Electronic Components | Barcode Readers | 0 | |||
| HW-24-10-H-S-325-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TX54AB00-2410H | TE Connectivity | Circular MIL Spec Strain Reliefs & Adapters | 0 | |||
| FN2410H-100-34 | TE Connectivity | Power Line Filters FN2410H-100/34 RoHS : Compliant |
| 0 | ||
| TX40AB00-2410H | TE Connectivity | Circular MIL Spec Strain Reliefs & Adapters ADAPTER |
| 0 | ||
| KSL0M410H7.5 | C&K Switches | Tactile Switches | 0 | |||
| HW-14-10-H-T-400-115 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| V410-HHANDSCNRXD.XMOD.BLK. | OMRON Electronic Components | CRD |
| 0 | ||
| CBL-COM-2054-10-HF | OMRON Electronic Components | Omron 10m M12 90deg controller cable |
| 0 | ||
| DBT72410-HR | Cynergy3 Components | Reed Relays HV RELAYS |
| 0 | ||
| J61-B0-26-410-H3D-D3 | Carling Technologies | J-Series Circuit Breaker |
| 0 | ||
| HW-24-10-H-S-675-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() ComSIT USA | BTS410H2E3043STS | Infineon Technologies AG | Smart High-Side Current Limit Switch RoHS : Not Compliant | 23,680 | ||
BTS410H2![]() | Infineon Technologies AG | Buffer/Inverter Based Peripheral Driver, 1 Driver, 1.8A, MOS, PZFM5 RoHS : Not Compliant | 4,700 | |||
BTS410H2E3043![]() | Infineon Technologies AG | SMART HIGHSIDE POWER SWITCH Buffer/Inverter Based Peripheral Driver, 1 Driver, 1.8A, MOS, PSFM5 RoHS : Not Compliant | 4,390 | |||
| UE27AE5410H | TE Connectivity | UNIVERSAL SERIAL BUS RECEPTACLE, STRAIGHT PCB TAIL, VERTICAL MOUNT USB Connector, 4 Contact(s), Female, Straight, Solder Terminal, Locking, Receptacle RoHS : Compliant | 2,200 | |||
| MALREKE05JG410H00K | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 1000uF RoHS : Compliant | 1,200 | |||
| MALREKC00JJ410H00F | Vishay Intertechnologies | RADIAL STYLE ALUMINUM CAPACITOR Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount RoHS : Compliant | 1,000 | |||
| MALREKE00JG410H00K | Vishay Intertechnologies | RADIAL STYLE ALUMINUM CAPACITOR Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount RoHS : Compliant | 450 | |||
| SWA62410HIF | spc | Electronic Component RoHS : Compliant | 2 | |||
![]() Interstate Connecting Components | UE27AC5410H | Amphenol Commercial | USB, TYPE A, RGHT ANGL HGH TMP |
| 1,114 | |
| 68002-410HLF | Amphenol FCi | RoHS : Compliant |
| 21 | ||
| 390FA007B1410H | Glenair Inc | 38999 sI&II EMI BS 90 DEG SZ14or15 CAD OD RoHS : Not Compliant |
| 1 | ||
| 390DS006NF1410H6 | Glenair Inc | 26482 sI EMI BS STR SZ14 Al/Cad RoHS : Not Compliant |
| 1 | ||
| 390VS091ME1410H4 | Glenair Inc | MM EMI BS STR SZ14151617 Al/eNi RoHS : Compliant | 0 | |||
| UE27AE5410H01 | Amphenol Commercial | USB 2.0 STD A RECEP. VT 30 AU, | 0 | |||
| 390FS002NF1410H4 | Glenair Inc | 38999 sI&II EMI BS STR SZ14or15 Al/Cad RoHS : Not Compliant |
| 0 | ||
| 390DA002B1410H | Glenair Inc | 26482 sI EMI BS 90 DEG SZ14 CAD OD RoHS : Not Compliant |
| 0 | ||
| RJE051AA1410H | Amphenol Commercial | 10P10C, LOW PROFILE, SHIELDED | 0 | |||
| TX40AB00-2410H | TE Connectivity | TX40AB00-2410H |
| 0 | ||
| 390FS001NF2410H3 | Glenair Inc | 38999 sI&II EMI BS STR SZ24or25 Al/Cad RoHS : Not Compliant | 0 | |||
| 380FS115M2410H6 | Glenair Inc | EMI/RFI NON-ENVIRO BS STRAIGHT W STRAIN RELIEF RoHS : Compliant |
| 0 | ||
| 390DS002NF1410H6 | Glenair Inc | 26482 sI EMI BS STR SZ14 Al/Cad RoHS : Not Compliant |
| 0 | ||
| 68422-410HLF | Amphenol FCi | BS II HDR SR STR-68422-410HLF RoHS : Compliant | 0 | |||
| 68691-410HLF | Amphenol FCi | OEM ITEM 578-5NPF-BERGSTIK STR |
| 0 | ||
![]() NexGen Digital | F-410H24B | 359 | ||||
![]() PEI Genesis | 75-068624-10H | Amphenol Corporation |
| 0 | ||
| 10-101974-10H | Amphenol Corporation |
| 0 | |||
| 75-068224-10H | Amphenol Corporation |
| 0 | |||
| 75-068124-10H | Amphenol Corporation |
| 0 | |||
| UE27AE5410H | Amphenol Corporation |
| 0 | |||
| 10-724774-10H | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | UE27BE5410H | Amphenol Corporation | Connector |
| 30,624 | |
| UE27AE5410H | Amphenol Corporation | Connector |
| 21,467 | ||
| 68422-410HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 1,518 | ||
| UE27-AC54-10H | Amphenol Corporation | Connector RoHS : Compliant |
| 871 | ||
| UE27AE7410H | Amphenol Corporation | Connector |
| 622 | ||
| 68020-410HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 591 | ||
| 69168-410HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 517 | ||
| 69190-410HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 264 | ||
| 78548-410HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 135 | ||
| 68015-410HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 66 | ||
| TX41AB00-1410H | TE Connectivity | Connectors |
| 15 | ||
| TX40AB00-1410H | TE Connectivity | Connectors |
| 14 | ||
| 390AA001B2410H | Glenair Inc | ACCESSORIES - RFI/EMI NON-ENV ADAPTER RoHS : Not Compliant |
| 5 | ||
| 67996-410HLF | Amphenol FCi | Cable Assembly |
| 5 | ||
| 380AS115NF2410H3 | Glenair Inc | ACCESSORIES - RFI/EMI NON-ENV ADAPTER |
| 4 | ||
![]() Chip 1 Exchange | P83CL410HFT/006-3 | Philips Semiconductors | INSTOCK | 1,908 | ||
![]() Avnet Abacus | UE27-AC54-10H | Amphenol Corporation | USB Connector USB Type A USB 20 Receptacle 4 Positions Through Hole Mount Right Angle (Alt: UE27-AC54-10H) RoHS : Compliant | 4,800 | ||
| 67997-410HLF | Amphenol Corporation | Pin Header BoardtoBoard 254 mm 2 Rows 10 Contacts Through Hole FCI BergStik 67997 (Alt: 67997-410HLF) RoHS : Compliant | 1,600 | |||
| UE27AC5410H | Amphenol Corporation | (Alt: UE27AC5410H) RoHS : Compliant | 0 | |||
| 67996-410HLF | Amphenol Corporation | Conn Unshrouded Header 10 POS 254mm Solder ST Through Hole (Alt: 67996-410HLF) RoHS : Compliant | 0 | |||
| FN2410H-25-33 | TE Connectivity | (Alt: 806178-SF) RoHS : Compliant | 0 | |||
| UE27-AE74-10H | Amphenol Corporation | (Alt: UE27-AE74-10H) RoHS : Compliant | 0 | |||
| FN3410HV-38-53 | TE Connectivity | (Alt: 810742-SF) RoHS : Not Compliant | 0 | |||
| FN2410HI-16-44 | TE Connectivity | SCNFN2410HI1644 (Alt: 815733-SF) RoHS : Compliant | 0 | |||
| FN2410H-100-34 | TE Connectivity | (Alt: 802216-SF) RoHS : Compliant | 0 | |||
| SF-2410HI250T-2 | Bourns Inc | - Tape and Reel (Alt: SF-2410HI250T-2) RoHS : Compliant | 0 | |||
| SF-2410HI700T-2 | Bourns Inc | - Tape and Reel (Alt: SF-2410HI700T-2) RoHS : Compliant | 0 | |||
| SF-2410HI050T-2 | Bourns Inc | - Tape and Reel (Alt: SF-2410HI050T-2) RoHS : Compliant | 0 | |||
| SF-2410HI500T-2 | Bourns Inc | - Tape and Reel (Alt: SF-2410HI500T-2) RoHS : Compliant | 0 | |||
| MALREKB00FG410H00K | Vishay Intertechnologies | Electrolytic Capacitor 1000 uF 50 V 20 Radial Leaded 2000 hours 105C Polar 5 mm (Alt: MALREKB00FG410H00K) RoHS : Compliant | 0 | |||
| MALREKB00FG410HG0K | Vishay Intertechnologies | Electrolytic Capacitor 1000 uF 50 V 20 Radial Leaded 2000 hours 105C Polar 5 mm (Alt: MALREKB00FG410HG0K) RoHS : Compliant | 0 | |||
![]() Avnet Asia | UE27AC5410H | Amphenol Corporation | (Alt: UE27AC5410H) RoHS : Compliant | 0 | ||
| RJE092880410H | Amphenol Corporation | Conn RJ45 Receptacle 16 POS Solder RA Through Hole 16 Terminal Dual Port (Alt: RJE092880410H) RoHS : Compliant | 0 | |||
| UE27-AE54-10H | Amphenol Corporation | (Alt: UE27-AE54-10H) RoHS : Compliant | 0 | |||
| GBU410_HF | Diodes Incorporated | (Alt: GBU410_HF) RoHS : Compliant | 0 | |||
| 67997-410HLF | Amphenol Corporation | Pin Header, Board-to-Board, 2.54 mm, 2 Rows, 10 Contacts, Through Hole, FCI BergStik 67997 (Alt: 67997-410HLF) RoHS : Compliant | 0 | |||
| 68015-410HLF | Amphenol Corporation | (Alt: 68015-410HLF) RoHS : Compliant | 0 | |||
| UE27AE5410H | Amphenol Corporation | (Alt: UE27AE5410H) RoHS : Compliant | 0 | |||
| 24SH10410 HF | Pulse Electronics Corporation | (Alt: 24SH10410 HF) RoHS : Compliant | 0 | |||
![]() Avnet Silica | T410H-6T![]() | STMicroelectronics | (Alt: T410H-6T) RoHS : Compliant | 0 | ||
| GBL410_HF | Diodes Incorporated | (Alt: GBL410_HF) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | ANLTE4-10HRA | Multi-Tech Systems Inc | LTE Antenna, 7.7 (2 dBi)(10 Pk) |
| 0 | |
![]() Component Electronics, Inc | 68001-410H | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 100 | |
BTS410H2E3062A![]() | Infineon Technologies AG | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 50 | ||
![]() DB Roberts | HXN3/4-10-HVY-GR2H-HDG | HEX NUT | HEX NUT GRADE 2H CARBON STEEL |
| 2,500 | |
| HXN3/4-10-HVY-STL | HEX NUT | Hex Nut |
| 422 | ||
| HXN3/4-10-HVY-GR2-STL-ZI | HEX NUT | Hex Nut STEEL ZINC |
| 50 | ||
![]() EBV Elektronik | MPC7410HX500LE | NXP Semiconductors | MPU MPC74xx RISC 64Bit 018um 500MHz 18V25V33V 360Pin FCCBGA Tray (Alt: MPC7410HX500LE) RoHS : Not Compliant | 0 | ||
| BFP410H6327XTSA1 | Infineon Technologies AG | Trans GP BJT NPN 45V 004A 4Pin3Tab SOT343 TR (Alt: SP000762244) RoHS : Compliant | 0 | |||
![]() Flip Electronics | MPC7410HX400LE | NXP Semiconductors | Stock RoHS : Not Compliant | 430 | ||
| MPC7410HX450LE | NXP Semiconductors | Stock RoHS : Not Compliant | 43 | |||
![]() Master Electronics | DBT72410-HR | Cynergy3 Components | High Voltage Relay - SPST-NC (1 Form B) - 24VDC Coil - Max Switching: 7kV 2A - Tungsten Contacts - PCB RoHS : Compliant |
| 38 | |
| FN2410H-100-34 | TE Connectivity | Power Line Filter 0Hz to 250Hz 100A 520VAC Terminal Block DIN Rail RoHS : Compliant |
| 3 | ||
| V410HDS4608XD | OMRON Industrial Automation | CRD RoHS : Compliant |
| 3 | ||
| FN2410H-25-33 | TE Connectivity | Single Phase Chassis Mount Filter 520VAC 25A ST MOQ Reduction RoHS : Compliant |
| 0 | ||
| SF-2410HI700T-2 | Bourns Inc | SMD Fuse High Inrush Current Withstand 7 A 125 VAC 125 VDC 2410 [6125 Metric] SF-2410HI-T RoHS : Compliant |
| 0 | ||
| TW-04-10-H-T-280-090 | Samtec Inc | FLEXIBLE SURFACE MOUNT BO RoHS : Compliant |
| 0 | ||
| EMR-5A22410H01L-16CH-SSR | Phoenix Contact | EMR 5A22410H01L 16CH SSR RoHS : Compliant |
| 0 | ||
| HW-24-10-H-S-325-SM | Samtec Inc | Conn Board Stacker HDR 24 POS 2.54mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| HTSW-104-10-H-Q | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FN2410HI-16-44 | TE Connectivity | FN2410HI-16-44 RoHS : Compliant |
| 0 | ||
| TX40AB00-2410H | TE Connectivity | Shrink Boot Adapters 180° 25 Shell Size Olive Drab Cadmium Over Electroless Nickel Aluminum Alloy MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| HTSW-134-10-H-T | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-14-10-H-T-400-115 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-124-10-H-T | Samtec Inc | RoHS : Compliant |
| 0 | ||
| J61-B0-26-410-H3D-D3 | Carling Technologies | J61B026410H3DD3 RoHS : Compliant |
| 0 | ||
![]() Neutron USA | PS-410-HGOEMCC | Tripp Lite | Tripp Lite PS-410-HG-OEMCC 4-Outlets Power Strip |
| 112 | |
| FN2410H-16-44 | Schaffner | Power Line Filters FN2410H-16/44 RoHS : Compliant |
| 50 | ||
| HJ161410HLP | Hammond Manufacturing | Electrical Enclosures N4,12 J Box Hinged - 16x14x10" - Steel/Gray |
| 28 | ||
| CWA2410H | Crydom Inc | Solid State Relays - Industrial Mount SOLID STATE RELAY 90-280 VAC RoHS : Compliant |
| 21 | ||
| FN2410H-25-33 | TE Connectivity | Power Line Filters FN2410H-25/33 RoHS : Compliant |
| 6 | ||
| FN2410H-25-33 | Schaffner | Power Line Filters FN2410H-25/33 RoHS : Compliant |
| 6 | ||
| FN2410H-100-34 | Schaffner | Power Line Filters FN2410H-100/34 RoHS : Compliant |
| 0 | ||
| CWD2410H | Crydom Inc | Solid State Relay, Panel Mt, Load: 24-280VAC 10A, Control: 3-32VDC, Zero Cross, TP, Screw Terminal RoHS : Compliant |
| 0 | ||
| TES 2-2410H | Traco Power | Isolated DC/DC Converters |
| 0 | ||
| FN2410H-60-34 | Schaffner | Power Line Filters FN2410H-60/34 RoHS : Compliant |
| 0 | ||
| FN2410H-80-34 | Schaffner | Single Phase EMC/EMI Line Filter 80 A 520V, 300V 250Hz Single Stage Terminal Block RoHS : Compliant |
| 0 | ||
| ACI4410HH | ebm-papst | AC Fans 119x38 115V 106CFM 4.4W 3350RPM 42dB BB RoHS : Compliant |
| 0 | ||
| FN2410H-8-44 | Schaffner | Power Line Filters 8 A Single Phase Filter RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C3410/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMC Plug Right Angle to BNC Male Cable Using RG316 Coax with HeatShrink. PE3C3410/HS is a SMC plug right angle to BNC male cable using RG316 coax. This Pasternack SMC plug right angle to BNC male cable assembly uses a 50 Ohm SMC for connector 1 and a 50 Ohm BNC for connector 2. SMC right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMC right angle to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3410/HS SMC plug right angle to BNC male cable assembly is constructed with RG316 coax and the maximum VSWR is 1.4:1. | 0 | ||
| PE3W02410/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. SMB Jack Bulkhead to SMA Male Low Loss Cable 200 Cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMB jack bulkhead to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB jack bulkhead to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink, SMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMB bulkhead cable connection on one end and SMA cable connection on the other. Our low loss SMB to SMA cable assemblies have a jack gender on end 1 and male on end 2. PE3W02410/HS-200CM can also be known as a low loss SMB female to SMA plug cable assembly and will be shipped same-day as it is purchased. SMB female to SMA plug cable assembly PE3W02410/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB jack bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02410/HS-200CM can also be used in the other direction and will be SMA male to SMB jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMB female bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB jack bulkhead to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3W02410/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. SMB Jack Bulkhead to SMA Male Low Loss Cable 100 Cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMB jack bulkhead to SMA male low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB jack bulkhead to SMA male low loss cable 100 cm length using LMR-100 coax with heatshrink, SMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMB bulkhead cable connection on one end and SMA cable connection on the other. Our low loss SMB to SMA cable assemblies have a jack gender on end 1 and male on end 2. PE3W02410/HS-100CM can also be known as a low loss SMB female to SMA plug cable assembly and will be shipped same-day as it is purchased. SMB female to SMA plug cable assembly PE3W02410/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB jack bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02410/HS-100CM can also be used in the other direction and will be SMA male to SMB jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMB female bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB jack bulkhead to SMA male low loss cable 100 cm length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3W03410/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to N Male Cable Using LMR-240-UF Coax with HeatShrink. PE3W03410/HS is a reverse polarity SMA male to N male cable using LMR-240-UF coax. This Pasternack reverse polarity SMA male to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity male SMA to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03410/HS SMA reverse polarity male to N male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W02410/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMB Jack Bulkhead to SMA Male Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMB jack bulkhead to SMA male low loss cable 36 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB jack bulkhead to SMA male low loss cable 36 inch length using LMR-100 coax with heatshrink, SMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMB bulkhead cable connection on one end and SMA cable connection on the other. Our low loss SMB to SMA cable assemblies have a jack gender on end 1 and male on end 2. PE3W02410/HS-36 can also be known as a low loss SMB female to SMA plug cable assembly and will be shipped same-day as it is purchased. SMB female to SMA plug cable assembly PE3W02410/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB jack bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02410/HS-36 can also be used in the other direction and will be SMA male to SMB jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMB female bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB jack bulkhead to SMA male low loss cable 36 inch length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3W12410/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. N Male to SMA Male Cable Using Tinned RG405 Coax with HeatShrink. PE3W12410/HS is a N male to SMA male cable using RG405 Tinned coax. This Pasternack N male to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W12410/HS N male to SMA male cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3W16410/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW240, RF Cable Type: LMR-LW240, RF Cable Impedance: 50 Ohm. SMA Male to 4.3-10 Male Cable Using LMR-LW240 Coax with HeatShrink. PE3W16410/HS is a SMA male to 4.3-10 male cable using LMR-LW240 coax. This Pasternack SMA male to 4.3-10 male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our male SMA to male 4.3-10 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16410/HS SMA male to 4.3-10 male cable assembly is constructed with LMR-LW240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W02410/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMB Jack Bulkhead to SMA Male Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMB jack bulkhead to SMA male low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB jack bulkhead to SMA male low loss cable 24 inch length using LMR-100 coax with heatshrink, SMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMB bulkhead cable connection on one end and SMA cable connection on the other. Our low loss SMB to SMA cable assemblies have a jack gender on end 1 and male on end 2. PE3W02410/HS-24 can also be known as a low loss SMB female to SMA plug cable assembly and will be shipped same-day as it is purchased. SMB female to SMA plug cable assembly PE3W02410/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB jack bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02410/HS-24 can also be used in the other direction and will be SMA male to SMB jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMB female bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB jack bulkhead to SMA male low loss cable 24 inch length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3W04410/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. UHF Female to UHF Male Cable Using LMR-195 Coax with HeatShrink. PE3W04410/HS is a UHF female to UHF male cable using LMR-195 coax. This Pasternack UHF female to UHF male cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm UHF for connector 2. Our female UHF to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04410/HS UHF female to UHF male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W02410/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMB Jack Bulkhead to SMA Male Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMB jack bulkhead to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB jack bulkhead to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink, SMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMB bulkhead cable connection on one end and SMA cable connection on the other. Our low loss SMB to SMA cable assemblies have a jack gender on end 1 and male on end 2. PE3W02410/HS-48 can also be known as a low loss SMB female to SMA plug cable assembly and will be shipped same-day as it is purchased. SMB female to SMA plug cable assembly PE3W02410/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB jack bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02410/HS-48 can also be used in the other direction and will be SMA male to SMB jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMB female bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB jack bulkhead to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3W09410/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to N Male Cable Using LMR-400-UF Coax with HeatShrink. PE3W09410/HS is a TNC male right angle to N male cable using LMR-400-UF coax. This Pasternack TNC male right angle to N male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. TNC right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09410/HS TNC male right angle to N male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W02410/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMB Jack Bulkhead to SMA Male Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMB jack bulkhead to SMA male low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB jack bulkhead to SMA male low loss cable using LMR-100 coax with heatshrink, SMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMB bulkhead cable connection on one end and SMA cable connection on the other. Our low loss SMB to SMA cable assemblies have a jack gender on end 1 and male on end 2. PE3W02410/HS can also be known as a low loss SMB female to SMA plug cable assembly and will be shipped same-day as it is purchased. SMB female to SMA plug cable assembly PE3W02410/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB jack bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02410/HS can also be used in the other direction and will be SMA male to SMB jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMB female bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB jack bulkhead to SMA male low loss cable using LMR-100 coax with heatshrink. | 0 | |||
| PE3W14410/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Right Angle Cable Using RG400 Coax with HeatShrink. PE3W14410/HS is a TNC male to TNC male right angle cable using RG400 coax. This Pasternack TNC male to TNC male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14410/HS TNC male to TNC male right angle cable assembly is constructed with RG400 coax. | 0 | |||
| PE3C4410/HS | Pasternack Enterprises | 0 | ||||
![]() Vyrian | P83CL410HFH![]() | NXP Semiconductors | RoHS : Not Compliant | 1,000 | ||
P83CL410HFP![]() | NXP Semiconductors | RoHS : Not Compliant | 830 | |||
| T0410H-8S | STMicroelectronics | 800 | ||||
| P83CL410HFT | NXP Semiconductors | RoHS : Not Compliant | 750 | |||
| FN2410H-100-34 | Schaffner Holding Ag | 660 | ||||
| SM4C1024-10HJM | Texas Instruments | 520 | ||||
| EPM7064LC84-10H | Intel / Altera | 310 | ||||
| P80CL410HFT | NXP Semiconductors | RoHS : Not Compliant | 300 | |||
| DSPIC33CK512MP410-H/PT | Microchip Technology Inc | RoHS : Compliant | 250 | |||
| DSPIC33CK256MP410-H/PT | Microchip Technology Inc | RoHS : Compliant | 230 | |||
| P80CL410HFD | NXP Semiconductors | 230 | ||||
| P80CL410HFPN | NXP Semiconductors | 140 | ||||
| MPC7410HX500LE | NXP Semiconductors | RISC Microprocessor, 32-Bit, 500MHz, CMOS, CBGA360 RoHS : Not Compliant | 43 | |||
| MPC7410HX400LE | NXP Semiconductors | RoHS : Not Compliant | 41 | |||
| EPM7032QC44-10H | Intel / Altera | EE PLD, 10ns, CMOS, PQFP44 | 28 | |||
![]() Win Source Electronics | SPU0410HR5H-1 | Knowles Precision Devices | MIC MEMS ANALOG OMNI |
| 34,200 | |
| SPU0410HR5H-1-7 | Knowles Precision Devices | SILICON MICROPHONE |
| 20,380 | ||
| SPU0410HR5H-PB | Knowles Precision Devices | MIC MEMS ANALOG OMNI -42DB |
| 12,860 | ||
| SPU0410HR5H-PB-7 | Knowles Precision Devices | MIC MEMS ANALOG OMNI -42DB |
| 12,330 | ||
| SPU0410HR5H-PB-T | Knowles Precision Devices |
| 11,900 | |||
| SPU0410HR5H-PB-2 | Knowles Precision Devices | SILICON MICROPHONE |
| 323 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |