| Electronic Components Datasheet Search |
|
285.19-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() PUI | 12.85253 | 24,347 | ||||
| 12.85578 | 14,005 | |||||
| 12.85035 | 8,488 | |||||
| 12.85648 | 3,000 | |||||
| 12.85620 | 2,918 | |||||
| 2012-1X02G00S-2.8-5.4-18. | 2,900 | |||||
| 12.85611 | 2,000 | |||||
| 12.85656 | 1,020 | |||||
| 12.85036 | 820 | |||||
| 12.85576 | 790 | |||||
| 12.85575 | 780 | |||||
| 12.85046 | 706 | |||||
| 12.85530 | 55 | |||||
| 12.85700 | 20 | |||||
| 28530 | 1 | |||||
![]() Richardson RFPD | UC0600-285-RSS | LICAP Technologies Inc | Ultra capacitor Cell RoHS : Compliant |
| 160 | |
| AAT2856INJ-EE-T1 | Skyworks Solutions Inc | HIGH CURRENT CHARGE PUMP WITH DUAL LDO FOR BACKLIG RoHS : Compliant | 0 | |||
| 935285836118 | NXP Semiconductors | Temp Sensor Digital Serial (2-Wire, I2C) 8-Pin TSS RoHS : Compliant |
| 0 | ||
| DME2857-000 | Skyworks Solutions Inc | SCHOTTKY BEAMLEAD RING QUAD RoHS : Compliant |
| 0 | ||
| R285005001 | Radiall | RF Std Cable Assy RoHS : Not Compliant | 0 | |||
| R573492285 | Radiall | RF Switch SP12T 0MHz to 12.4GHz 60dB RoHS : Not Compliant |
| 0 | ||
| 80365285 | HUBER+SUHNER | Microbend MR-9 | 0 | |||
| SI5335B-B02852-GMR | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 200MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| SI5351A-B11285-GTR | Skyworks Solutions Inc | CMOS Clock Generator with VCXO RoHS : Compliant | 0 | |||
| SI8285CD-ISR | Skyworks Solutions Inc | Optocoupler Drive Push-Pull 1-CH 5.5V 1500V 16-Pin RoHS : Compliant |
| 0 | ||
| SC0600-285-RSS | LICAP Technologies Inc | SUPERCAP ULTRACAP RoHS : Compliant | 0 | |||
| SI8285DD-IS | Skyworks Solutions Inc | SiC FET-Ready ISO Drivers RoHS : Compliant |
| 0 | ||
| 11028535-00 | TE Connectivity | Pressure sensor RoHS : Compliant | 0 | |||
| B39222B1285L210 | RF360 Holdings Singapore Pte Ltd | CSSP3 DPLX GT RoHS : Compliant |
| 0 | ||
| R285020421W | Radiall | Cable Assembly Coaxial 0.2m UMP PL |
| 0 | ||
![]() Rutronik | FH28-55S-0.5SH(05) | Hirose Electric Co Ltd | 55P FFC/FPC ZIF SMT 0.50mm RoHS : Compliant |
| 38,000 | |
| FH28-50S-0.5SH(05) | Hirose Electric Co Ltd | 50P FFC/FPC ZIF SMT 0.50mm RoHS : Compliant |
| 12,000 | ||
| 528521670 | Molex | 16P FFC/FPC Non-ZIF SMT 90° Bott-Con RoHS : Compliant |
| 5,000 | ||
| P/N1285 | Keystone Electronics Corp | PC QUICK-FIT TERMINAL RoHS : Compliant |
| 3,000 | ||
| LMF4D103W2851 | Vishay Intertechnologies | LMF4 10K 20% LIN 0,1% 0,05W RoHS : Compliant |
| 246 | ||
| CY8C4147AZE-S285 | Infineon Technologies AG | Cortex-M0+ 128K TQFP-64 125°C RoHS : Compliant |
| 10 | ||
| VN38.13/13285 | Marschner | EI38/13,6 230V/9V 4,5VA RoHS : Compliant |
| 7 | ||
![]() Chip 1 Exchange | 175285-2 | TE Connectivity | INSTOCK RoHS : Compliant | 473,200 | ||
| 1-2013928-5 | TE Connectivity | INSTOCK RoHS : Compliant | 54,921 | |||
| 1877285-5 | TE Connectivity | INSTOCK RoHS : Compliant | 17,420 | |||
| 175285-3 | TE Connectivity | INSTOCK RoHS : Compliant | 13,650 | |||
| 12.85035 | Geyer Electronic E K | INSTOCK | 8,488 | |||
| 39-53-2285 | Molex | INSTOCK RoHS : Compliant | 8,414 | |||
| NCP707BMX285TCG | onsemi | INSTOCK RoHS : Compliant | 3,900 | |||
| 1728570000- | Weidmüller Interface GmbH & Co. KG | INSTOCK | 2,195 | |||
| 12.85611 | Geyer Electronic E K | INSTOCK | 2,000 | |||
| 12.85656 | Geyer Electronic E K | INSTOCK | 1,020 | |||
| 12.85576 | Geyer Electronic E K | INSTOCK | 790 | |||
| 12.85575 | Geyer Electronic E K | INSTOCK | 780 | |||
| CDRH6D285R0NC | SUM | INSTOCK | 48 | |||
| 10-00-2085-1285 | INSTOCK | 36 | ||||
| 3798702-228-5 | INSTOCK | 1 | ||||
![]() Braemac Americas-Symmetry | SI8285_86-KIT | Skyworks Solutions Inc | Evaluation kit for Si8285 and Si8286 products |
| 1 | |
ABM8-166-114.285MHZ-T2![]() | Abracon Corporation | CRYSTAL 114.2850MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| IC-HG30QFN28-5X5 | iC-Haus | 6 A Laser Switch |
| 0 | ||
| IC-MH16QFN28-5X5 | iC-Haus | 12-Bit Angular Hall Encoder IC (up to 16 pole pairs) RoHS : Compliant |
| 0 | ||
| ABM8-166-114.285MHZ-T | Abracon Corporation | CRYSTAL 114.285MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| 1002857 | Kyocera AVX Components | Broadband External LTE/Cellula RoHS : Compliant |
| 0 | ||
AX7DAF1-114.2850T![]() | Abracon Corporation | XTAL OSC XO 114.2850MHZ LVDS SMD RoHS : Compliant |
| 0 | ||
| IC-HTQFN285X5 | iC-Haus | DUAL CW LASER DIODE DRIVER |
| 0 | ||
| ACMS-Q4528-510-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMEPR40N-4285Z | Aimtec | RoHS : Compliant |
| 0 | ||
PRO-EX-285![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| IC-MHAQFN28-5X5 | iC-Haus | Angular Hall Encoder w/ Sin/Cos Outputs RoHS : Compliant |
| 0 | ||
| AMEHR50-4285Z | Aimtec | RoHS : Compliant |
| 0 | ||
| MA285.LBICG.001 | Taoglas Antenna Solutions | MA285 Adhesive Mount 5in1 Combination GNSS, 2*LTE MIMO 2*Wi-Fi MIMO Low Profile Antenna |
| 0 | ||
| IC-HTPQFN28-5X5 | iC-Haus | Dual CW P-Type Laser Diode Driver |
| 0 | ||
![]() DB Roberts | AESS37B285 | PennEngineering (PEM) | Designed for high load applications. Available with rib key or full hex features for high torque applications.Both UNC and UNF threads available in No. 10 and larger thread sizes. Check for availability of other grip ranges and designs. | 0 | ||
| AECH3724KB285 | PennEngineering (PEM) | 3/8 | 0 | |||
| 12853B | Heyco | 0 | ||||
| 07003-00285 | Avdel | GEN TL - O-RING | 0 | |||
| T1191-3CY285 | HeliCoil | INS H-C 10-32 FR TANGLS CIN27 | 0 | |||
| D7-285-101-161 | Southco | These two styles of quick access fasteners provide convenient installation and operation with grip tolerance and a wide range of tolerance for support panel and mounting panel thicknesses. They are available in metallic and thermoplastic constructions to | 0 | |||
| AES37B-285 | PennEngineering (PEM) | Designed for high load applications. Available with rib key or full hex features for high torque applications.Both UNC and UNF threads available in No. 10 and larger thread sizes. Check for availability of other grip ranges and designs. | 0 | |||
| AES37KB285 | PennEngineering (PEM) | Designed for high load applications. Available with rib key or full hex features for high torque applications.Both UNC and UNF threads available in No. 10 and larger thread sizes. Check for availability of other grip ranges and designs. | 0 | |||
| AESS37R285 | PennEngineering (PEM) | 3/8 | 0 | |||
| 3591-3CNV285 | HeliCoil | 0 | ||||
| 462850A | Essentra Components | BSPGAS THREADED PLUGNYL YELLOW | 0 | |||
| 462853 | Essentra Components | 0 | ||||
| 23285B | Heyco | PMBMT-50-079-5 HS BLACK | 0 | |||
| 2851 | Heyco | B 875-750 WHITE | 0 | |||
| 1191-3GN285 | HeliCoil | 0 | ||||
![]() ECCO | 106-0285-000 | ITT Interconnect Solutions |
| 418 | ||
| 1060285000 | ITT Interconnect Solutions |
| 418 | |||
| 104-0285-000 | ITT Interconnect Solutions |
| 95 | |||
| 1040285000 | ITT Interconnect Solutions |
| 95 | |||
![]() Maritex | 179228-5 | TE Connectivity | Rectangular Connector Housings; 179228-5; TE CONNECTIVITY; 1; 5; 5; Natural RoHS : Compliant |
| 7,261 | |
| 1-178128-5 | TE Connectivity | Rectangular Connector Housings; 1-178128-5; TE CONNECTIVITY; 1; 5; Black; Straight RoHS : Compliant |
| 4,644 | ||
TPS3828-50DBVR![]() | Texas Instruments | Power Management ICs (PMICs); TPS3828-50DBVR; TEXAS INSTRUMENTS; 5; 2.9 mm; 1.45 mm; SOT-23 RoHS : Compliant |
| 2,895 | ||
| ULO-TB71-128/5.0-03P-4100C | ULO | PCB terminal block; pitch 5.0mm; 3-ways; vertical; wire range 2.5mm2 (AWG 24-12); rising clamp type; steel cage; with screws for a cross screwdriver; green color; UL 300V/10A, TUV 250V/18A |
| 2,544 | ||
| ULO-TB71-128/5.0-03P-4110C | ULO | PCB terminal block; pitch 5.0mm; 3-ways; vertical; wire range 2.5mm2 (AWG 26-12); rising clamp type; with screws for a cross screwdriver; steel cage; green color; UL 300V/10A, TUV 250V/15A |
| 2,075 | ||
| K5ARH14272285 | Jantek Electronics Co. | Toroidal Ferrite EMI core, Ø 6.0 mm, Z=40Ω for 25MHz, Z=80Ω for 100MHz /500 RoHS |
| 912 | ||
| 176285-1 | TE Connectivity | Rectangular Connector Housings; 176285-1; TE CONNECTIVITY; 2; 6; Natural; Straight RoHS : Compliant |
| 720 | ||
| ULO-TB71-128/5.0-02P-4000A | ULO | PCB terminal block; pitch 5.00mm; 2-ways; vertical; wire range 2.5mm2 (AWG 26-12); with screws for a flat screwdriver; rising clamp type; brass cage; green color; UL 300V/10A, TUV 250V/15A |
| 556 | ||
| 2-1437285-2 | TE Connectivity | Automotive Connectors; 2-1437285-2; TE CONNECTIVITY; Black; 26; Yes; 32.15 mm RoHS : Compliant |
| 393 | ||
| DG128-5.0-02P-14-00Z(H) | Degson Electronics Co Ltd | PCB terminal block; pitch 5.00mm; 2-ways; vertical; wire range 1.5mm2 (AWG 26-14); with screws for a flat screwdriver; green color; brass cage; UL 300V/15A, TUV 250V/18A |
| 222 | ||
| RSM850-6112-85-1005 | RELPOL | Electromagnetic relay; contact rating current 2A; coil voltage 5VDC; 2 changeover contact (2P); 2A/30VDC; 0;5A/125VAC |
| 170 | ||
LM2853MHX-1.2/NOPB![]() | Texas Instruments | DC DC Converters; LM2853MHX-1.2/NOPB; TEXAS INSTRUMENTS; 14; Buck; 1; 4.4 mm RoHS : Compliant |
| 163 | ||
| 628512 | Texas Instruments | SRAM Memory; 4Mb; 512kx8bit; parallel 8bit; 70ns; 2.4V-5.5V; -25+85 deg.C; SMD; SOP32 |
| 57 | ||
LM2853MHX-2.5/NOPB![]() | Texas Instruments | DC DC Converters; LM2853MHX-2.5/NOPB; TEXAS INSTRUMENTS; 14; Buck; 1; 4.4 mm RoHS : Compliant |
| 33 | ||
| 32001285V3 | MIPOT | Module; ISM; receiver; 433MHz; -90dBm; OOK/ASK; 2.5-3.6V; THT |
| 3 | ||
![]() Pasternack Enterprises US | PE3285LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to Mini UHF Male Cable 36 Inch Length Using RG142 Coax, RoHS., Radio frequency assembly N male to mini UHF male cable 36 inch length using RG142 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to mini UHF male cable 36 inch length using RG142 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to mini UHF cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and mini UHF cable connection on the other. Our type N to mini UHF cable assemblies have a male gender on end 1 and male on end 2. This type N to mini UHF cable is a male to male coax assembly, PE3285LF-36, can also be known as a type N plug to mini UHF plug cable assembly and will be shipped same-day as it is purchased. N type plug to mini UHF plug cable assembly PE3285LF-36 is built with RG142 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to mini UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this N type male to mini UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3285LF-36 can also be used in the other direction and will be mini UHF male to type N male cable assembly if the opposite connectivity is required. N type plug to mini UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to mini UHF cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to mini UHF male cable 36 inch length using RG142 coax, RoHS. |
| 0 | |
| PE33285LF-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. HN Male Right Angle to HN Male Right Angle Cable 60 Inch Length Using RG393 Coax, LF Solder., Radio frequency assembly HN male right angle to HN male right angle cable 60 inch length using RG393 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male right angle to HN male right angle cable 60 inch length using RG393 coax, LF solder, HN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle HN cable connection on one end and right angle HN cable connection on the other. Our right angle HN to right angle HN cable assemblies have a male gender on end 1 and male on end 2. PE33285LF-60 can also be known as a right angle HN plug to right angle HN plug cable assembly and will be shipped same-day as it is purchased. HN plug to HN plug cable assembly PE33285LF-60 is built with RG393 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with right angle HN to right angle HN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency HN right angle male to HN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. HN right angle plug to HN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male right angle to HN male right angle cable 60 inch length using RG393 coax, LF solder. |
| 0 | ||
| PE3M0285-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMB, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348A, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-P141, RF Cable Type: Coax, RF Cable Specification: PE-P141 datasheet, RF Cable Impedance : 50 Ohm. BMB Size 8 D38999 Contact Socket to SMA Male Cable 60 Inch Length Using PE-P141 Coax with HeatShrink, LF Solder. The PE3M0285-60 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMB socket contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMB to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0285-60 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMB socket to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. BMB socket to SMA male cable assembly is built with PE-P141, which is a flexible coax type. The Pasternack PE3M0285-60 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMB to SMA RF cable are available on our downloadable PDF datasheet. BMB socket to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMB and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMB to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W02853LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG303/U, RF Cable Type: RG303, RF Cable Impedance: 50 Ohm. HN Male to 7/16 DIN Male Right Angle Cable Using RG303 Coax with HeatShrink, LF Solder. PE3W02853LF/HS is a HN male to 7/16 DIN male right angle cable using RG303 coax. This Pasternack HN male to 7/16 DIN male right angle cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. HN to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male HN to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02853LF/HS HN male to 7/16 DIN male right angle cable assembly is constructed with RG303 coax. | 0 | |||
| PE3W18285 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. 2.4mm Female to 2.4mm Male Cable Using PE-SR405FLJ Coax. PE3W18285 is a 2.4mm female to 2.4mm male cable using PE-SR405FLJ coax. This Pasternack 2.4mm female to 2.4mm male cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm 2.4mm for connector 2. Our female 2.4mm to male 2.4mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W18285 2.4mm female to 2.4mm male cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3W22857 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to TNC Female Cable Using PE-P195 Coax. PE3W22857 is a BNC male right angle to TNC female cable using PE-P195 coax. This Pasternack BNC male right angle to TNC female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm TNC for connector 2. BNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22857 BNC male right angle to TNC female cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3W12850LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to N Male Cable Using LMR-600-UF Coax, LF Solder. PE3W12850LF is a 7/16 DIN male to N male cable using LMR-600-UF coax. This Pasternack 7/16 DIN male to N male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm N for connector 2. Our male 7/16 DIN to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12850LF 7/16 DIN male to N male cable assembly is constructed with LMR-600-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W14285 | Pasternack Enterprises | Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 10-32, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. 10-32 Male Right Angle to 10-32 Female Bulkhead Cable Using RG174 Coax. PE3W14285 is a 10-32 male right angle to 10-32 female bulkhead cable using RG174 coax. This Pasternack 10-32 male right angle to 10-32 female bulkhead cable assembly uses a 50 Ohm 10-32 for connector 1 and a 50 Ohm 10-32 for connector 2. 10-32 right angle to 10-32 coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 10-32 right angle to female 10-32 bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14285 10-32 male right angle to 10-32 female bulkhead cable assembly is constructed with RG174 coax. | 0 | |||
| PE38285 | Pasternack Enterprises | 0 | ||||
| PE3C9285/HS | Pasternack Enterprises | 0 | ||||
| PE3W22851/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. NEX10 Male to N Male Cable Using PE-SR402FLJ Coax with HeatShrink. PE3W22851/HS is a NEX10 male to N male cable using PE-SR402FLJ coax. This Pasternack NEX10 male to N male cable assembly uses a 50 Ohm NEX10 for connector 1 and a 50 Ohm N for connector 2. Our male NEX10 to male N cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W22851/HS NEX10 male to N male cable assembly is constructed with PE-SR402FLJ coax. | 0 | |||
| PE3285-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 72 inches. N Male to Mini UHF Male Cable 72 Inch Length Using RG142 Coax., Radio frequency assembly N male to mini UHF male cable 72 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to mini UHF male cable 72 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to mini UHF cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and mini UHF cable connection on the other. Our type N to mini UHF cable assemblies have a male gender on end 1 and male on end 2. This N type to mini UHF cable is a male to male coax assembly, PE3285-72, can also be known as a type N plug to mini UHF plug cable assembly and will be shipped same-day as it is purchased. Type N plug to mini UHF plug cable assembly PE3285-72 is built with RG142 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to mini UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to mini UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3285-72 can also be used in the other direction and will be mini UHF male to type N male cable assembly if the opposite connectivity is required. Type N plug to mini UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to mini UHF cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to mini UHF male cable 72 inch length using RG142 coax. |
| 0 | ||
| PE34285LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to N Female Cable 36 Inch Length Using PE-SR405AL Coax., Radio frequency assembly N male to N female cable 36 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female cable 36 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE34285LF-36, can also be known as a type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE34285LF-36 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34285LF-36 can also be used in the other direction and will be N type female to type N male cable assembly if the opposite connectivity is required. Type N plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female cable 36 inch length using PE-SR405AL coax. |
| 0 | ||
| PE3W22855 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FME, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. FME Jack to FME Plug Cable Using LMR-100A-UF Coax. PE3W22855 is a FME jack to FME plug cable using LMR-100A-UF coax. This Pasternack FME jack to FME plug cable assembly uses a 50 Ohm FME for connector 1 and a 50 Ohm FME for connector 2. Our jack FME to plug FME cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22855 FME jack to FME plug cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W25285 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. Push-On SMP Female Right Angle to MCX Plug Right Angle Cable Using LMR-100A-UF Coax. PE3W25285 is a SMP female right angle to MCX plug right angle cable using LMR-100A-UF coax. This Pasternack SMP female right angle to MCX plug right angle cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm MCX for connector 2. SMP right angle to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25285 SMP female right angle to MCX plug right angle cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Teledyne HiRel | 5962-8550101CA | Teledyne HiRel | HEX INVERTER, SCHMITT TRIGGER RoHS : Not Compliant | 0 | ||
5962-8506401MXA![]() | Teledyne HiRel | MICROCONTROLLER, 8-BIT (3.5 TO 12 MHZ) RoHS : Not Compliant | 0 | |||
5962-8506401MQA![]() | Teledyne HiRel | MICROCONTROLLER, 8-BIT (3.5 TO 12 MHZ) RoHS : Not Compliant | 0 | |||
5962-8506403MMA![]() | Teledyne HiRel | MICROCONTROLLER, 8-BIT (3.5 TO 16 MHZ) RoHS : Not Compliant | 0 | |||
5962-8506401MMA![]() | Teledyne HiRel | MICROCONTROLLER, 8-BIT (3.5 TO 12 MHZ) RoHS : Not Compliant | 0 | |||
5962-8506403MQA![]() | Teledyne HiRel | MICROCONTROLLER, 8-BIT (3.5 TO 16 MHZ) RoHS : Not Compliant | 0 | |||
5962-8506403MXA![]() | Teledyne HiRel | MICROCONTROLLER, 8-BIT (3.5 TO 16 MHZ) RoHS : Not Compliant | 0 | |||
![]() Win Source Electronics | LM285M-2.5![]() | Texas Instruments | IC VREF SHUNT 2.5V 8SOIC RoHS : Not Compliant |
| 40,000 | |
| LM285MX-2.5 | National Semiconductor Corporation | VOLTAGE REFERENCE, 2.5V, BIPOLAR RoHS : Not Compliant |
| 40,000 | ||
ADUM1285BRZ![]() | Analog Devices Inc | DGTL ISO 3KV 2CH GEN PURP 8SOIC / 3 kV RMS Dual Channel Digital Isolators RoHS : Compliant |
| 24,500 | ||
| LM285M | Texas Instruments | LM185/LM285/LM385 Adjustable Micropower Voltage References RoHS : Not Compliant |
| 21,386 | ||
MIC28510YJL-TR![]() | Microchip Technology Inc | IC REG BUCK ADJUSTABLE 4A 28MLF RoHS : Compliant |
| 15,090 | ||
TPS3828-50QDBVRG4Q![]() | Texas Instruments | IC SUPERVISOR 1 CHANNEL SOT23-5 / Supervisor Open Drain or Open Collector 1 Channel SOT-23-5 RoHS : Compliant |
| 12,130 | ||
| AD22285-R2 | Analog Devices Inc | ACCELEROMETER 50G ANALOG 8CLCC RoHS : Compliant |
| 10,850 | ||
| AAT4285IJS-3-T1 | Skyworks Solutions Inc | 12V Slew Rate Controlled Load Switch | SLEW RATE CNTRL LOAD SW SC70JW RoHS : Compliant |
| 6,000 | ||
LTC2855IDE#PBF![]() | Linear Technology | IC TXRX RS485/RS422 12-DFN / Single Transmitter/Receiver RS-422/RS-485 Automotive 12-Pin DFN EP Tube RoHS : Compliant |
| 4,620 | ||
LTC2852IS#PBF![]() | Linear Technology | IC TXRX RS485/RS422 14SOIC / Single Transmitter/Receiver RS-422/RS-485 Automotive 14-Pin SOIC N Tube RoHS : Compliant |
| 4,240 | ||
LTC2854CDD![]() | Linear Technology | 3.3V 20Mbps RS485/RS422 Transceivers with Integrated Switchable Termination RoHS : Not Compliant |
| 2,500 | ||
| LTC2850IS8#TRPBF | Analog Devices Inc | IC TRANSCEIVER HALF 1/1 8SOIC RoHS : Compliant |
| 2,370 | ||
XR16C2852CJ-F![]() | Exar Corporation | IC UART FIFO 128B 44PLCC RoHS : Compliant |
| 1,430 | ||
| LTC2850HDD#PBF | Analog Devices Inc | IC TRANSCEIVER HALF 1/1 8DFN RoHS : Compliant |
| 1,400 | ||
| BCM53285MIPBG | Broadcom Limited | 24FE(W PHY) + 2GE(SGMII) + 2.5 / Interface |
| 100 | ||
![]() Wuhan P&S | T30LMPSR165CFCT285T2G | onsemi | 300 MA LDO, WITH ACTIVE D RoHS : Compliant |
| 20,000 | |
LM285D-2.5G![]() | onsemi | Micropower Voltage Reference Diodes RoHS : Compliant |
| 98 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |