Electronic Components Datasheet Search
  English  ▼
ALLDATASHEET.COM

X  



2566U-R Distributor

DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

ComSIT USA
XC2C2566CPG132C

AMD Xilinx COOLRUNNER-II CPLD Flash PLD, 6ns, 256-Cell, CMOS, PBGA132
RoHS : Compliant
309
CY37256VP25666BI

Cypress Semiconductor Electronic Component
RoHS : Not Compliant
222
C82566

Intel Corporation Electronic Component
RoHS : Not Compliant
24
B25668A6836A375

TDK Electronics WINDCAP FILM CAPACITOR FOR POWER FACTOR CORRECTION Film Capacitor, Polypropylene, 10% +Tol, 5% -Tol, 3.28uF, Stud Mount
RoHS : Not Compliant
4
B25667J6336A375

S+M Components CAP FILM Radial
RoHS : Not Compliant
2

PEI Genesis
995-0002-566

ITT Interconnect Solutions
1 : $4.85
10 : $4.68
25 : $4.37
50 : $4.1
100 : $3.87
298
CMB06E-14-18P-002-566

Amphenol Corporation
1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
0

Avnet Silica
22566

Allied Vision Technologies GmbH 2x MIPI CSI2 Adapter Board for MSC SM2SMBEP5 (Alt: 22566)
RoHS : Compliant
0

EBV Elektronik
TCD2566BFG(Z,T,C)

Toshiba America Electronic Components Image Sensor BWColor CCD 22Pin CLCC (Alt: TCD2566BFG(Z,T,C))
RoHS : Compliant
0
SGM25662GTGB8G/TR

SG Micro Corp (Alt: SGM25662GTGB8G/TR)
RoHS : Compliant
0
SGM2566CGTDE8G/TR

SG Micro Corp (Alt: SGM2566CGTDE8G/TR)
RoHS : Compliant
0
SGM2566AGTDE8G/TR

SG Micro Corp (Alt: SGM2566AGTDE8G/TR)
RoHS : Compliant
0
SGM25661YTGB8G/TR

SG Micro Corp (Alt: SGM25661YTGB8G/TR)
RoHS : Compliant
0
SGM2566BGTDE8G/TR

SG Micro Corp (Alt: SGM2566BGTDE8G/TR)
RoHS : Compliant
0
2T1040NK008U22566

Infineon Technologies AG Thyristors Triacs (Alt: SP000090792)
RoHS : Compliant
0

Pasternack Enterprises US
PE3C6256-60

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 60 inches. Plenum N Male to NEX10 Male Low PIM Cable 60 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum N male to NEX10 male low PIM cable 60 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to NEX10 male low PIM cable 60 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-NM-LP N type to TC-250-NX10M-LP NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-NM-LP type N cable connection on one end and TC-250-NX10M-LP NEX10 cable connection on the other. Our low PIM TC-250-NM-LP type N to TC-250-NX10M-LP NEX10 cable assemblies have a male gender on end 1 and male on end 2. This TC-250-NM-LP type N to TC-250-NX10M-LP NEX10 cable is a male to male coax assembly, PE3C6256-60, can also be known as a low PIM TC-250-NM-LP N type plug to TC-250-NX10M-LP NEX10 plug cable assembly and will be shipped same-day as it is purchased. TC-250-NM-LP type N plug to TC-250-NX10M-LP NEX10 plug cable assembly PE3C6256-60 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-NM-LP N cable assembly is manufactured with TC-250-NM-LP N type to TC-250-NX10M-LP NEX10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-NM-LP type N male to TC-250-NX10M-LP NEX10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6256-60 can also be used in the other direction and will be TC-250-NX10M-LP NEX10 male to TC-250-NM-LP type N male cable assembly if the opposite connectivity is required. Low PIM TC-250-NM-LP N type plug to TC-250-NX10M-LP NEX10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-NM-LP type N to TC-250-NX10M-LP NEX10 cable assembly for quick shipment worldwide. Variations of TC-250-NM-LP type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to NEX10 male low PIM cable 60 inch length using SPP-250-LLPL coax using Times Microwave parts.
1 : $169.99
25 : $161.49
50 : $152.99
100 : $146.19
251
PE3W25667

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Slide-On BMA Jack 2 Hole Flange Cable Using RG402 Coax. PE3W25667 is a SMA male right angle to BMA jack 2 hole flange cable using RG402 coax. This Pasternack SMA male right angle to BMA jack 2 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BMA for connector 2. SMA right angle to BMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to jack BMA 2 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W25667 SMA male right angle to BMA jack 2 hole flange cable assembly is constructed with RG402 coax.
0
PE3W25666

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Slide-On BMA Jack 2 Hole Flange Cable Using PE-SR405FL Coax. PE3W25666 is a SMA male right angle to BMA jack 2 hole flange cable using PE-SR405FL coax. This Pasternack SMA male right angle to BMA jack 2 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BMA for connector 2. SMA right angle to BMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to jack BMA 2 hole flange cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W25666 SMA male right angle to BMA jack 2 hole flange cable assembly is constructed with PE-SR405FL coax.
0
PE3W25669

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Slide-On BMA Plug Bulkhead Cable Using RG174 Coax. PE3W25669 is a SMA male right angle to BMA plug bulkhead cable using RG174 coax. This Pasternack SMA male right angle to BMA plug bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BMA for connector 2. SMA right angle to BMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to plug BMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25669 SMA male right angle to BMA plug bulkhead cable assembly is constructed with RG174 coax.
0
PE3W12566-24

Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Female to SMA Male Low Loss Cable 24 Inch Length Using LMR-LW195 Coax., Radio frequency assembly SMA female to SMA male low loss cable 24 inch length using LMR-LW195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to SMA male low loss cable 24 inch length using LMR-LW195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W12566-24 can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3W12566-24 is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12566-24 can also be used in the other direction and will be SMA male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA male low loss cable 24 inch length using LMR-LW195 coax.
1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5
0
PE3M0256-60

Pasternack Enterprises Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348A, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 D38999 Contact Pin to SMA Male Cable 60 Inch Length Using PE-P086 Coax with HeatShrink, LF Solder. The PE3M0256-60 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA pin contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0256-60 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMA pin to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0256-60 between-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMA pin to SMA male cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0256-60 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMA to SMA RF cable are available on our downloadable PDF datasheet. BMA pin to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMA RF cable assembly as per your requirements.
1 : $145.99
10 : $140.15
25 : $134.31
100 : $128.47
0
PE3W25663

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to 7/16 DIN Male Cable Using LMR-400-UF Coax. PE3W25663 is a SMA male right angle to 7/16 DIN male cable using LMR-400-UF coax. This Pasternack SMA male right angle to 7/16 DIN male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 7/16 DIN for connector 2. SMA right angle to 7/16 DIN coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25663 SMA male right angle to 7/16 DIN male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3C2566LF

Pasternack Enterprises Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Cable Using RG393 Coax, LF Solder. PE3C2566LF is a 7/16 DIN male to 7/16 DIN male cable using RG393 coax. This Pasternack 7/16 DIN male to 7/16 DIN male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 7/16 DIN to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2566LF 7/16 DIN male to 7/16 DIN male cable assembly is constructed with RG393 coax.
0
PE3W02566

Pasternack Enterprises Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: D-Sub, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. D-Sub Plug Right Angle to D-Sub Plug Right Angle Cable Using RG223 Coax. PE3W02566 is a D-Sub plug right angle to D-Sub plug right angle cable using RG223 coax. This Pasternack D-Sub plug right angle to D-Sub plug right angle cable assembly uses a 50 Ohm D-Sub for connector 1 and a 50 Ohm D-Sub for connector 2. D-Sub right angle to D-Sub right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug D-Sub right angle to plug D-Sub right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02566 D-Sub plug right angle to D-Sub plug right angle cable assembly is constructed with RG223 coax.
0
PE3W22566

Pasternack Enterprises Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMB Jack Right Angle to BNC Female Bulkhead Cable Using RG316 Coax. PE3W22566 is a SMB jack right angle to BNC female bulkhead cable using RG316 coax. This Pasternack SMB jack right angle to BNC female bulkhead cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm BNC for connector 2. SMB right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack SMB right angle to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22566 SMB jack right angle to BNC female bulkhead cable assembly is constructed with RG316 coax.
0
PE3W25668

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Slide-On BMA Jack 2 Hole Flange Cable Using PE-SR402FL Coax. PE3W25668 is a SMA male right angle to BMA jack 2 hole flange cable using PE-SR402FL coax. This Pasternack SMA male right angle to BMA jack 2 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BMA for connector 2. SMA right angle to BMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to jack BMA 2 hole flange cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W25668 SMA male right angle to BMA jack 2 hole flange cable assembly is constructed with PE-SR402FL coax.
0
PE3W12566

Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm. SMA Female to SMA Male Low Loss Cable Using LMR-LW195 Coax., Radio frequency assembly SMA female to SMA male low loss cable using LMR-LW195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to SMA male low loss cable using LMR-LW195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W12566 can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3W12566 is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12566 can also be used in the other direction and will be SMA male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA male low loss cable using LMR-LW195 coax.
0
PE3W25661

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to 7/16 DIN Male Cable Using LMR-240 Coax. PE3W25661 is a SMA male right angle to 7/16 DIN male cable using LMR-240 coax. This Pasternack SMA male right angle to 7/16 DIN male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 7/16 DIN for connector 2. SMA right angle to 7/16 DIN coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25661 SMA male right angle to 7/16 DIN male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W25660

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Male to TNC Female Bulkhead Cable Using RG405 Coax. PE3W25660 is a SMA male to TNC female bulkhead cable using RG405 coax. This Pasternack SMA male to TNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to female TNC bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W25660 SMA male to TNC female bulkhead cable assembly is constructed with RG405 coax.
0
PE3W12566LF/HS

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Cable Using LMR-LW195 Coax with HeatShrink, LF Solder. PE3W12566LF/HS is a SMA male to SMA female cable using LMR-LW195 coax. This Pasternack SMA male to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12566LF/HS SMA male to SMA female cable assembly is constructed with LMR-LW195 coax, * LMR™ is a trademark of Times Microwave Systems.
0

Vyrian
VSP2566PTR

Texas Instruments Consumer Circuit, PQFP48
RoHS : Compliant
7,874
VSP2566PTRG4

Texas Instruments Consumer Circuit, PQFP48
RoHS : Compliant
6,883
VSP2566PT

Texas Instruments Consumer Circuit, PQFP48
RoHS : Compliant
6,203
XC2C256-6PQ208

AMD Xilinx
4,117
VSP2566PTG4

Texas Instruments Consumer Circuit, PQFP48
RoHS : Compliant
3,899
XC2C256-6CPG132C

AMD Xilinx Flash PLD, 6ns, 256-Cell, PLA-Type, CMOS, PBGA132
RoHS : Compliant
3,852
XC2C256-6FTG256C

AMD Xilinx Flash PLD, 6ns, 256-Cell, PLA-Type, CMOS, PBGA256
RoHS : Compliant
3,699
XC2C256-6FT256C

AMD Xilinx Flash PLD, 6ns, 256-Cell, PLA-Type, CMOS, PBGA256
RoHS : Not Compliant
3,419
XC2C256-6PQ208C

AMD Xilinx Flash PLD, 6ns, 256-Cell, PLA-Type, CMOS, PQFP208
RoHS : Compliant
2,688
XC2C256-6CP132

AMD Xilinx
2,206
XC2C256-6CP132C

AMD Xilinx Flash PLD, 6ns, 256-Cell, PLA-Type, CMOS, PBGA132
RoHS : Not Compliant
2,183
XC2C256-6TQ144C

AMD Xilinx Flash PLD, 6ns, 256-Cell, PLA-Type, CMOS, PQFP144
RoHS : Compliant
2,155
XC2C256-6TQ144

AMD Xilinx
1,909
XC2C256-6PQG208C

AMD Xilinx Flash PLD, 6ns, 256-Cell, PLA-Type, CMOS, PQFP208
RoHS : Compliant
1,800
XC2C256-6FT256

AMD Xilinx
1,777

Win Source Electronics
TLV62566DBVR

Texas Instruments IC REG BCK ADJ 1.5A SYNC SOT23-5
RoHS : Compliant
2,620 : $0.1146
1,960 : $0.1278
1,515 : $0.1322
1,100 : $0.1366
710 : $0.141
295 : $0.1719
84,000
XC2C256-6VQG100C

AMD Xilinx IC CPLD 256MC 5.7NS 100VQFP
RoHS : Compliant
2 : $158.7787
1 : $177.0993
458

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Link to Datasheet   |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com