240U-4UP-N-R Price, Distributor, Stock

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. N Male to BNC Male Cable 59.06 Inch Length Using LMR-240-UF Coax., Radio frequency assembly N male to BNC male cable 59.06 inch length using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to BNC male cable 59.06 inch length using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and BNC cable connection on the other. Our low loss type N to BNC cable assemblies have a male gender on end 1 and male on end 2. This type N to BNC cable is a male to male coax assembly, PE3C2404-150CM, can also be known as a low loss type N plug to BNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to BNC plug cable assembly PE3C2404-150CM is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency N type male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2404-150CM can also be used in the other direction and will be BNC male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to BNC male cable 59.06 inch length using LMR-240-UF coax.

1 : $86.29
25 : $81.98
50 : $77.66
100 : $74.21

586

LMR-240-LLPX

Pasternack Enterprises

Key Specifications, Generic Name: LMR-240-LLPX, Flex Type: Flexible, Impedance: 50 Ohm, Dielectric Type: PTFE, Velocity of Propagation: 76 %, Jacket Diameter: 0.214 in, Jacket Material: Fluoropolymer, RF Shielding: 90 dB, Frequency, Max: 8 GHz, Max Operating Temperature: 125 deg C, Minimum Bend Radius, One Time: 0.75 in, Minimum Bend Radius, Repeated: 2.5 in, Coax Type: Coax. Low Loss Flexible LMR-240-LLPX Rated Coax Cable with Fluoropolymer Jacket. The LMR-240-LLPX part number from Pasternack is a low-loss coax cable that is flexible. Pasternack flexible coax RF cable has an impedance of 50 Ohm and a PTFE dielectric. Our LMR-240-LLPX coax cable is constructed with a 0.214-inch jacket made of fluoropolymer. This low-loss coax cable has a nominal capacitance of 26.7 pF/Ft. This LMR-240-LLPX flexible RF cable has a minimum RF shielding of 90 dB. Our coax cable from Pasternack has a maximum frequency of 8 GHz. Additional specifications for this LMR-240-LLPX RF coaxial cable are on our downloadable PDF datasheet above. This low-loss RF cable has a one-time minimum bend radius of 0.75 inch and a repeat minimum bend radius of 2.5 inch. Our low-loss 50 Ohm flexible cable has a peak power rating of 5,600 watts. Our LMR-240-LLPX coax cable can operate at temperatures ranging from -40 to +125 degrees C. The coax cable has a typical insertion loss/attenuation of 1.4, 3.1, 5.4, 7.6, 9.9, 11.5, 12.9, 15.1, 20 and 24.3 dB/100ft at frequency of 30 MHz, 150 MHz, 450 MHz, 900 MHz, 1.5 GHz, 2 GHz, 2.5 GHz, 3.4 GHz, 5.8 GHz and 8 GHz respectively. The LMR-240-LLPX flexible RF cable has a copper center conductor. Pasternack LMR-240-LLPX low-loss coax cables are part of our RF, microwave, and millimeter wave components. These flexible cables and our other RF parts are available for same-day shipping worldwide. Custom RF cable assemblies using LMR-240-LLPX or other coax can be built and shipped the same business day as well, LMR® is a registered trademark of Times Microwave Systems.

1 : $6.79

204

PE3C9240-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SSMB Jack Bulkhead Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly SMA male to SSMB jack bulkhead cable 12 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SSMB jack bulkhead cable 12 inch length using RG178 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SSMB bulkhead cable connection on the other. Our SMA to SSMB cable assemblies have a male gender on end 1 and jack on end 2. PE3C9240-12 can also be known as a SMA plug to SSMB female cable assembly and will be shipped same-day as it is purchased. SMA plug to SSMB female cable assembly PE3C9240-12 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SSMB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9240-12 can also be used in the other direction and will be SSMB jack bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SSMB jack bulkhead cable 12 inch length using RG178 coax.

1 : $226.99
25 : $215.64
50 : $204.29
100 : $195.21

PE3FCA240-15M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: APC, Connector 2 Series: LC, Connector 2 Polish Type: APC, Jacket Burn Rating: LSZH, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC APC to LC APC, OS2 Single Mode Indoor Distribution Cable, 4.5mm LSZH, 2.0mm breakout, Yellow -15M. Pasternack’s PE3FCA240-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 4-fiber cable assembly is equipped with LC/APC to LC/APC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA240-15M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/APC to LC/APC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $166.99
5 : $160.31
10 : $153.63
25 : $146.95

PEW51CP002-40

Pasternack Enterprises

Key Specifications, Waveguide Size : WR-51, Flange Size: None Flange, Flange Type : UG Square Flange, Flange Group : Standard, Minimum Frequency: 14.5 GHz, Maximum Frequency: 22 GHz, Impedance : 50 Ohms, Maximum VSWR: 1.25:1, Maximum Insertion Loss: 0.2 dB, Coupling: 40 dB. WR-51 Waveguide 40 dB Broadwall Coupler, UG Square Flange, SMA Female Coupling Port, 14.5 GHz to 22 GHz, Brass., Pasternack’s PEW51CP002-40 is a WR-51 directional broadwall waveguide coupler with a 50 Ohm impedance. This directional waveguide coupler has a SMA connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 14.5 GHz and 22 GHz. This waveguide broadwall coupler has a coupling value of 40 dB. This 40 dB waveguide coupler has a brass copper body with silver plating. Our WR-51 directional waveguide coupler is rated for a maximum input power (CW) of 350 Watts. This 22 GHz waveguide coupler has a 1.1:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this 3-port WR-51 waveguide coupler are on our downloadable PDF datasheet above. The PEW51CP002-40 broadwall waveguide coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our waveguide coupler has a maximum insertion loss of 0.2 dB. This waveguide coupler has a UG square flange, which is made up of brass copper material with a silver plating. The waveguide coupler with a UG square flange has a minimum coupler directivity of 25 dB. This WR-51 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same-business-day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal 3-port directional broadwall waveguide coupler for your requirement.

1 : $2,080.0
5 : $2,038.4
10 : $1,996.8
25 : $1,955.2

PE3C2407/HS

Pasternack Enterprises

PE3W01240-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Clamped SMA Male to SMA Male Low Loss Cable 36 Inch Length Using PE-P195 Coax., Radio frequency assembly clamped SMA male to SMA male low loss cable 36 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Clamped SMA male to SMA male low loss cable 36 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W01240-36 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W01240-36 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this clamped SMA male to SMA male low loss cable 36 inch length using PE-P195 coax.

1 : $171.99
25 : $163.39
50 : $154.79
100 : $147.91

PE3W12406

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-500, RF Cable Type: SPF-500, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Cable Using SPF-500 Coax. PE3W12406 is a 7/16 DIN male to 7/16 DIN male cable using SPF-500 coax. This Pasternack 7/16 DIN male to 7/16 DIN male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 7/16 DIN to male 7/16 DIN cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W12406 7/16 DIN male to 7/16 DIN male cable assembly is constructed with SPF-500 coax.

PE38240-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Female Bulkhead Cable 36 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly SMA male to SMA female bulkhead cable 36 inch length using PE-C100-LSZH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA female bulkhead cable 36 inch length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE38240-36, can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE38240-36 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38240-36 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead cable 36 inch length using PE-C100-LSZH coax.

1 : $66.39
25 : $63.07
50 : $59.75
100 : $57.1

TMC-TC-240-TM-X

Pasternack Enterprises

PE3W01240LF

Pasternack Enterprises

PE3W24003

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. 75 Ohm MCX Plug to 50 Ohm SMA Male Cable Using RG316 Coax. PE3W24003 is a MCX plug to SMA male cable using RG316 coax. This Pasternack MCX plug to SMA male cable assembly uses a 75 Ohm MCX for connector 1 and a 50 Ohm SMA for connector 2. Our plug MCX to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24003 MCX plug to SMA male cable assembly is constructed with RG316 coax.

PE3W24010/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Female to SMA Male Right Angle Cable Using RG178 Coax with HeatShrink. PE3W24010/HS is a SMA female to SMA male right angle cable using RG178 coax. This Pasternack SMA female to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24010/HS SMA female to SMA male right angle cable assembly is constructed with RG178 coax.

PE3W24047/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. TNC Male to 3.5mm Male Cable Using PE-P086HF Coax with HeatShrink. PE3W24047/HS is a TNC male to 3.5mm male cable using PE-P086HF coax. This Pasternack TNC male to 3.5mm male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm 3.5mm for connector 2. Our male TNC to male 3.5mm cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24047/HS TNC male to 3.5mm male cable assembly is constructed with PE-P086HF coax.

PE3W24085

Pasternack Enterprises

Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. HN Male to N Female Cable Using RG58 Coax. PE3W24085 is a HN male to N female cable using RG58 coax. This Pasternack HN male to N female cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm N for connector 2. Our male HN to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24085 HN male to N female cable assembly is constructed with RG58 coax.

Teledyne HiRel

54ACQ240LMQB

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS

M38510/32402BSA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8872403LA

Teledyne HiRel

PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10 OUTPUT AND-OR
RoHS : Not Compliant

79024023A

Teledyne HiRel

PROM, POWER-SWITCHED, 1K X 8, 75 NS ACCESS TIME

DM54LS240J/883

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS

M38510/32402B2C

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS

5962-88724013A

Teledyne HiRel

PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10 OUTPUT AND-OR
RoHS : Not Compliant

5962-89724012A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8972401SA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

54ACQ240FMQB

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS

54ACTQ16240FMQB

Teledyne HiRel

16-BIT INVERTING BUFFER/LINE DRIVER WITH TRI-STATE OUTPUTS

7902402KA

Teledyne HiRel

PROM, POWER-SWITCHED, 1K X 8, 75 NS ACCESS TIME

5962-87624012A

Teledyne HiRel

HEX INVERTER, SCHMITT TRIGGER
RoHS : Not Compliant

7902401JA

Teledyne HiRel

PROM, POWER-SWITCHED, 1K X 8, 90 NS ACCESS TIME

5962-88724023A

Teledyne HiRel

PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10 OUTPUT AND-OR
RoHS : Not Compliant

Venkel Ltd.

MEHF0204-TK-1240GT

VENKEL LTD

High Frequency MELF;0204;1/4W;�100PPM;124R�2%
RoHS : Not Compliant

MELFC0102-UZ-2400BT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�15PPM;240R;�0.1%
RoHS : Compliant

MELFC0204-TC-2403FT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;240K;�1%
RoHS : Compliant

MELFC0204-TE-1240DT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�25PPM;124R;�0.5%
RoHS : Compliant

MELFC0204-TE-2403BT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�25PPM;240K;�0.1%
RoHS : Compliant

MELFC0204-TN-3240CT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�10PPM;324R;�0.25%
RoHS : Compliant

MELFC0204-TZ-2403CT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�15PPM;240K;�0.25%
RoHS : Compliant

MELFC0204-ZC-1240FT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�50PPM;124R;�1%
RoHS : Compliant

MELFC0204-ZC-2403DT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�50PPM;240K;�0.5%
RoHS : Compliant

MELFC0204-ZE-1240BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�25PPM;124R;�0.1%
RoHS : Compliant

MELFC0204-ZN-2401CT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�10PPM;2.4K;�0.25%
RoHS : Compliant

MELFC0204-ZZ-1240CT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�15PPM;124R;�0.25%
RoHS : Compliant

MELFC0207-VC-2404FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�50PPM;2.4M;�1%
RoHS : Compliant

MELFC0207-VK-2400FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�100PPM;240R;�1%
RoHS : Compliant

MELFC0207-XE-2400FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�25PPM;240R;�1%
RoHS : Compliant

Vyrian

240-1288-00-0602J

3m Electronic Products Division

IC Socket, DIP40, 40 Contact(s)

17,076

21038122405

Harting Electronics & Kg

Circular Connector, 4 Contact(s), Female, Crimp Terminal

17,009

EFF4(01)-240X240T0800

KEMET Corporation

EMI/EMD/EMC Protections

16,087

1694240

Phoenix Contact

Circular Connector, 5 Contact(s), Female, Socket
RoHS : Compliant

13,042

890324024005CS

Wurth Elektronik

Film Capacitor

12,362

112409-HMC578LC3B

Analog Devices Inc

11,831

EFF4(05)-240X240T0800

KEMET Corporation

EMI/EMD/EMC Protections

11,638

2322401

Phoenix Contact

Interface Modules
RoHS : Compliant

11,254

EMR240002402-LF

Broadcom Limited

9,769

FG1(25)-240X240T2900

KEMET Corporation

EMI/EMD/EMC Protections

8,246

1937240

Phoenix Contact

Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s)
RoHS : Compliant

8,229

2403276

Phoenix Contact

Development Software

6,316

2400396

Phoenix Contact

Development Software

6,008

982424-041-024.0-0SY

3m Electronic Products Division

Cable Assembly, 1 Conductor(s), 30AWG, 500V

405

135110-01-24.00

Amphenol Corporation

Interconnection Device
RoHS : Compliant

198

Wuhan P&S

SIZ240DT-T1-GE3

Vishay Intertechnologies

DUAL N-CHANNEL 40-V (D-S) MOSFET
RoHS : Compliant

1 : $4.38
100 : $1.46
500 : $1.35
1,000 : $1.32

36,000

SZMMSZ5240BT1G

onsemi

RoHS : Compliant

1 : $0.1126
100 : $0.0719
500 : $0.0593
1,000 : $0.0545

30,000

STH240N10F7-6

STMicroelectronics

100V, 2m ��, 180AN channel power MOSFET
RoHS : Compliant

1 : $1.71
100 : $1.71
500 : $1.71
1,000 : $1.71

10,000

MURA240T3G

onsemi

Surface Mount Ultrafast Power Rectifiers
RoHS : Compliant

1 : $0.3288
100 : $0.2099
500 : $0.1731
1,000 : $0.1591

5,000

74VHC240MTCX

onsemi

INV OCTAL BUF/LINE DR
RoHS : Compliant

1 : $0.89
100 : $0.57
500 : $0.47
1,000 : $0.44

5,000

61083-182402LF

Amphenol FCi

180Pos,Dual Row,0.8mm,BTB Vertical Header
RoHS : Compliant

1 : $5.43
100 : $5.19
500 : $4.54
1,000 : $4.38

1,100

240U-4UP-N-R Distributor

Link URL