| Electronic Components Datasheet Search |
|
2250G-C2-R0 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | MF-RX012/250-2 | Bourns Inc | - Tape and Reel (Alt: MF-RX012/250-2) RoHS : Not Compliant |
| 21,000 | |
| RCL12250000Z0EG | Vishay Intertechnologies | Zero Ohm Resistor, Jumper, Long Side, 1225 Wide [3264 Metric], Thick Film, 2 W, 12 A - Tape and Reel (Alt: RCL12250000Z0EG) RoHS : Compliant |
| 4,000 | ||
| AF2-2.50V125TM | AEM Inc | - Tape and Reel (Alt: AF2-2.50V125TM) RoHS : Not Compliant |
| 2,000 | ||
ABM2-25.000MHZ-D4Y-T![]() | Abracon Corporation | Crystal, Microprocessor, 25 MHz, SMD, 8mm x 4.5mm x 1.6mm, 30 ppm, 18 pF, 30 ppm, ABM2 - Tape and Reel (Alt: ABM2-25.000MHZ-D4Y-T) RoHS : Compliant |
| 2,000 | ||
ABMM2-25.000MHZ-D1-T![]() | Abracon Corporation | - Tape and Reel (Alt: ABMM2-25.000MHZ-D1-T) RoHS : Compliant |
| 1,000 | ||
| MSS225004 | TE Connectivity | - Bag (Alt: 1825263-1) RoHS : Compliant |
| 704 | ||
| MAL225099117E3 | Vishay Intertechnologies | SMD Aluminium Electrolytic Capacitor, Radial Can - SMD, 1500 uF, 50 V, 10000 hours @ 105?C, Polar - Tape and Reel (Alt: MAL225099117E3) RoHS : Compliant |
| 600 | ||
| 202K132-25-0 | TE Connectivity | - Bulk (Alt: 878495-000) RoHS : Compliant |
| 500 | ||
| 202A111-25/225-0 | TE Connectivity | - Bulk (Alt: 727361-000) RoHS : Compliant |
| 440 | ||
| 202K132-25/225-0 | TE Connectivity | - Bulk (Alt: 481350-000) RoHS : Compliant |
| 299 | ||
| 502225-0801 | Molex | Pin Header, 80 Contacts, 4 Rows, Tin, Copper Alloy, PCB Header, Right Angle, CMC 502225 Series, 6 A - Trays (Alt: 5022250801) RoHS : Compliant |
| 235 | ||
| ATS-52250B-C1-R0 | Advanced Thermal Solutions Inc | MAXIFLOW HEAT SINK , DOUBLE-SIDED THER - Bulk (Alt: ATS-52250B-C1-R0) RoHS : Compliant |
| 22 | ||
| ELFH02250 | Amphenol Corporation | - Bulk (Alt: ELFH02250) RoHS : Compliant | 17 | |||
| 342A012-25-0 | TE Connectivity | - Bulk (Alt: 878518-000) RoHS : Compliant |
| 3 | ||
| DATAPACK/F1422501VXA | STMicroelectronics | - Bulk (Alt: DATAPACK/F1422501VXA) RoHS : Not Compliant | 1 | |||
![]() Newark | 213225-0211 | Molex | Conn, Rcpt, 2Pos, 1Row, 1.5Mm; |Molex 213225-0211 RoHS : Compliant |
| 5,043 | |
| 2250013-4 | TRP Connector Ltd | Rj45 Conn, R/A Jack, 8P8C, 1Port, Th; Modular Connector Type:Rj45 Jack; Port Configuration:1 X 1 (Port); No. Of Positions/Loaded Contacts (Per Port):8P8C; Lan Category:-; Ip Rating:-; Connector Mounting:Through Hole Mount Rohs Compliant: Yes RoHS : Compliant |
| 816 | ||
| HW-04-09-L-D-402-250 | Samtec Inc | Conn Stack Brd, 2.54Mm, 8Pos, Hdr; |Samtec, Inc. HW-04-09-L-D-402-250 RoHS : Compliant |
| 810 | ||
| 31402-2500 | Molex | Automotive Housing, Rcpt, 2Pos, 10A; |Molex 31402-2500 RoHS : Compliant |
| 446 | ||
| 2250539-1 | TRP Connector Ltd | Magjack Conn, 8P8C, Rj45 Jack, 2X2 Port; Modular Connector Type:Rj45 Jack; Port Configuration:2 X 2 (Stacked); No. Of Positions/Loaded Contacts (Per Port):8P8C; Lan Category:-; Ip Rating:-; Connector Mounting:Through Hole Mount Rohs Compliant: Yes RoHS : Compliant |
| 80 | ||
| HMTSW-225-09-S-S-540 | Samtec Inc | Hdr, Brd-To-Brd, 5.08Mm, 25Pos; |Samtec, Inc. HMTSW-225-09-S-S-540 RoHS : Compliant |
| 69 | ||
| STFDFD2-250 10 | pro-power | Crimp Terminal, Pro Power Stfdfd2-250 10; |Pro Power STFDFD2-250 10 RoHS : Compliant |
| 50 | ||
| 342A012-25-0 | TE Connectivity | Heat-Shrink Boot; For Use With:Cable & W |Te Connectivity Raychem 342A012-25-0 RoHS : Compliant |
| 16 | ||
| M235-1-2-25-0 | Simpson Electric | 3-1/2 Bklt, 9-32Vdc, 2Adc Rohs Compliant: Na |Simpson M235-1-2-25-0 RoHS : Not Compliant |
| 7 | ||
| 106225-0010 | Molex | Fibre Optic Cable, Mpo Jack, Mpo Jack; Fibre Optic Connector A:Mpo Jack; Fibre Optic Connector B:Mpo Jack; No. Of Fibers:12Fibres; Fibre Type:Singlemode; Lead Length - Metric:25M; Fibre Diameter:9Μm/125Μm Rohs Compliant: Yes |Molex 106225-0010 (Alternate Part Number: 191128250221 RoHS : Compliant |
| 2 | ||
| 410-0024-2250-10000 | TE Connectivity | Shielding Gasket, Sheet, Silicone; |Kemtron Te Connectivity 410-0024-2250-10000 RoHS : Compliant |
| 2 | ||
| 106225-0047 | Molex | Fibre Optic Cable, Mpo Jack, Mpo Jack; Fibre Optic Connector A:Mpo Jack; Fibre Optic Connector B:Mpo Jack; No. Of Fibers:24Fibres; Fibre Type:Singlemode; Lead Length - Metric:50M; Fibre Diameter:9Μm/125Μm Rohs Compliant: Yes |Molex 106225-0047 (Alternate Part Number: 191128250580 RoHS : Compliant |
| 1 | ||
| 2250 | Adafruit Industries | Pi Model B+/Pi 2/Pi 3 Case Base - Orange |Adafruit 2250 (Alternate Part Number: 4250838500135 RoHS : Not Compliant |
| 0 | ||
| 2250 | Thomas & Betts | 1/2In 90D Lt Cord Conn .500-.625 |Abb Thomas & Betts 2250 (Alternate Part Number: 4250838500135 RoHS : Not Compliant |
| 0 | ||
| 2250 | Bernstein AG | Service Set, 9Pc; |Bernstein Werkzeugfabrik 2250 (Alternate Part Number: 4250838500135 RoHS : Not Compliant |
| 0 | ||
![]() Sager | 2250 | ABB Group | Conduit Fittings & Accessories |
| 0 | |
| 2250 | Qnity Laird | Laird Technologies | 0 | |||
| 202K142-25-01/225-0 | TE Connectivity | Heat Shrink Cable Boots & End Caps 202K142-25-01/225-0 RoHS : Compliant |
| 0 | ||
| 322A412-25-04/225-0 | TE Connectivity | Heat Shrink Cable Boots & End Caps 322A412-25-04/225-0 |
| 0 | ||
| 302A112-25-03/225-0CS8665 | TE Connectivity | TE Connectivity 302A112-25-03/225-0CS8665 | 0 | |||
| 202D232-25-08/225-0-CS8910 | TE Connectivity | Heat Shrink Cable Boots & End Caps 202D232-25-08/225-0-CS8910 |
| 0 | ||
| 382A012-25-01/225-0 | TE Connectivity | Heat Shrink Cable Boots & End Caps 382A012-25-01/225-0 RoHS : Compliant | 0 | |||
| 202K132-25-01/225-0 | TE Connectivity | Heat Shrink Cable Boots & End Caps 202K132-25-01/225-0 |
| 0 | ||
| T2250002250-000 | TE Connectivity | TE Connectivity SCSF16-25 RoHS : Compliant | 0 | |||
| 202K232-25-01/225-0 | TE Connectivity | Heat Shrink Cable Boots & End Caps HS-BOOT RoHS : Compliant |
| 0 | ||
| 222K152-25-00/225-0 | TE Connectivity | Heat Shrink Cable Boots & End Caps 222K152-25-00/225-0 |
| 0 | ||
| 222D232-25-02/225-0-CS8910 | TE Connectivity | Heat Shrink Cable Boots & End Caps 222D232-25-02/225-0-CS8910 |
| 0 | ||
| 202K132-25-01/225-0CS8387 | TE Connectivity | Heat Shrink Cable Boots & End Caps 202K132-25-01/225-0CS8387 |
| 0 | ||
| 2-2500180-8 | TE Connectivity | CC,PA6,AD23.5,GRY |
| 0 | ||
| 2010225004 | Molex | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() TME | 0312.250MXP | Littelfuse Inc | Fuse: fuse; 6.3x32mm; cylindrical,glass; 250mA; 250VAC; quick blow RoHS : Compliant |
| 1,000 | |
| 1.622.2500.50 | HUMMEL AG | Cable gland; M25; 1.5; IP68; brass; HSK-M-Ex-d |
| 16 | ||
| 2250 | Lutronic Holdings | Connector: circular; socket; size 20; 02; female; industrial; PIN: 7 |
| 13 | ||
| 11192225-00 | TE Connectivity | Converter: pressure |
| 5 | ||
| 0201WMF2250TEE | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 225Ω; SMD; 0201; 50mW; ±1%; 25V; -55÷125°C |
| 0 | ||
| 02225094 | Bopla | Enclosure: multipurpose; X: 80mm; Y: 82mm; Z: 85mm; EUROMAS; IP66 |
| 0 | ||
| 0225006.VXUP | Littelfuse Inc | Fuse: fuse; 4.5x14.5mm; glass; holders; 6A; 125VAC; quick blow; 225 |
| 0 | ||
| 0225010.VXUP | Littelfuse Inc | Fuse: fuse; 4.5x14.5mm; glass; holders; 10A; 125VAC; quick blow; 225 |
| 0 | ||
| 04042250 | GSR | Countersink; high speed steel grounded HSS-G; Ø: 25mm; plunger |
| 0 | ||
| 1-1622506-0 | TE Connectivity | Resistor: thin film; 499kΩ; THT; 600mW; ±1%; Ø2.5x6.8mm; axial RoHS : Compliant |
| 0 | ||
| 100012250 | Telegartner Karl Gartner GmbH | Fiber patch cord; OM1; SC/PC,ST/PC; 2m; 62.5/125um; LSZH; beige |
| 0 | ||
| 122505A | Pomona Electronics | Laboratory connector: 2,4mm banana; plug; black; 5A; 1.5kV; Ø: 1mm RoHS : Compliant |
| 0 | ||
| 1622503-1 | TE Connectivity | Resistor: metal film; 4.7MΩ; THT; 600mW; ±1%; LR; 6.2x2.3mm RoHS : Compliant |
| 0 | ||
| 208312 25 000 100 | RECA | Screw; M12; M12x25; Head: cheese head; hex key; HEX 10mm; steel |
| 0 | ||
| 212 25000 SB | Rennsteig Tools Inc | Chisel; L: 250mm; SDS-Plus®; tag; Tipwidth: 20mm; flat |
| 0 | ||
![]() ComSIT USA | ASSRV622502E | Avago Technologies | AVAILABLE EU | 2,078 | ||
| B88069X2250S102 | TDK Electronics | AVAILABLE EU RoHS : Compliant | 1,168 | |||
| VLMS622504 | VARTRX | AVAILABLE EU | 854 | |||
| 5022250801 | Molex | AVAILABLE EU | 224 | |||
![]() PEI Genesis | M39012/25-0111 | Amphenol SV Microwave |
| 19 | ||
| 225-0090-000 | ITT Interconnect Solutions |
| 0 | |||
| S4225-04 | SOURIAU-SUNBANK |
| 0 | |||
| 225-0048-000 | ITT Interconnect Solutions |
| 0 | |||
| 122501 | Amphenol RF |
| 0 | |||
| S694-122-50R | SOURIAU-SUNBANK |
| 0 | |||
| 225-0071-000 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| S1073-82-2.50C | SOURIAU-SUNBANK |
| 0 | |||
| S1786-2250-4 | SOURIAU-SUNBANK |
| 0 | |||
| S4033R2250S-3A-34 | SOURIAU-SUNBANK |
| 0 | |||
| SE59C2250A34NL | SOURIAU-SUNBANK |
| 0 | |||
| 906-122-5014 | Amphenol Corporation |
| 0 | |||
| TI902250/34-415-1001-1-6- | Trafag Sensors and Controls |
| 0 | |||
| M39012/25-0019 | Amphenol SV Microwave |
| 0 | |||
| S1659-2250-4 | SOURIAU-SUNBANK |
| 0 | |||
![]() PUI | 022501.5HXP | 200 | ||||
| 0225005.VXUP | 120 | |||||
![]() Avnet Asia | 5022250801 | Molex | Pin Header, 80 Contacts, 4 Rows, Tin, Copper Alloy, PCB Header, Right Angle, CMC 502225 Series, 6 A (Alt: 5022250801) RoHS : Compliant | 1,280 | ||
| 2250456-2 | Bel Fuse | (Alt: 2250456-2) RoHS : Compliant |
| 20 | ||
| 2250978001 | Molex | (Alt: 2250978001) RoHS : Compliant | 0 | |||
| 2250013-4 | Bel Fuse | (Alt: 2250013-4) RoHS : Compliant | 0 | |||
| IXA16-HBFF12-25.000MHZ | Abracon Corporation | (Alt: IXA16-HBFF12-25.000MHZ) RoHS : Compliant | 0 | |||
| 1-2250290-4 | Bel Fuse | Conn RJ45 Receptacle 12 POS 2.032mm Solder RA Through Hole 18 Terminal Single Port Tray (Alt: 1-2250290-4) RoHS : Compliant | 0 | |||
| 2250806-1 | Bel Fuse | (Alt: 2250806-1) RoHS : Compliant | 0 | |||
| 10128483-122500ULF | Amphenol Corporation | (Alt: 10128483-122500ULF) RoHS : Compliant | 0 | |||
| 10183202-250000SLF | Amphenol Corporation | FCI10183202-250000SLF CONN HEADER VERTIC (Alt: 10183202-250000SLF) RoHS : Compliant | 0 | |||
| 61083-022506LF | Amphenol Corporation | (Alt: 61083-022506LF) RoHS : Compliant | 0 | |||
| GP422-50016 | Amphenol Corporation | (Alt: GP422-50016) RoHS : Compliant | 0 | |||
| 2250013-3 | Bel Fuse | (Alt: 2250013-3) RoHS : Compliant | 0 | |||
| 2250187-1 | Bel Fuse | (Alt: 2250187-1) RoHS : Compliant | 0 | |||
| 1-2250107-9 | Bel Fuse | (Alt: 1-2250107-9) RoHS : Compliant | 0 | |||
| DDR503225007M | Amphenol Corporation | Conn DDR5 UDIMM Socket Receptacle 288 POS 0.85mm Solder ST SMD Tray (Alt: DDR503225007M) RoHS : Compliant | 0 | |||
![]() ECCO | M39012/25-0021 | Amphenol SV Microwave | RoHS : Compliant |
| 6 | |
![]() Flip Electronics | KTY82/250 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 495,000 | |
| KTY82/250,215 | NXP Semiconductors | Stock | 495,000 | |||
| NCV2250SQ2T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 9,000 | ||
| NCV2250SN2T1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 9,000 | ||
| FCPF2250N80Z | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,000 | ||
| FCD2250N80Z | onsemi | Stock, Ship Today RoHS : Compliant | 552 | |||
| MRF6V12250HSR5 | NXP Semiconductors | Stock RoHS : Compliant | 250 | |||
![]() Pasternack Enterprises US | PE3W22509/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Blue FAKRA Jack Right Angle to MMCX Plug Right Angle Cable 24 Inch Length Using RG188 Coax with HeatShrink., Pasternack’s PE3W22509/HS-24 right angle FAKRA jack to right angle MMCX plug RF cable assembly using RG188 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The FAKRA jack to MMCX plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle FAKRA cable connection on one end and a right angle MMCX cable connection on the other. Our FAKRA to MMCX cable assembly has a jack gender on end 1 and a plug on end 2. PE3W22509/HS-24 can also be known as a right angle FAKRA female to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W22509/HS-24 RF cable has a ptfe jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. Our right angle FAKRA jack to right angle MMCX plug cable has a maximum VSWR of 1.4:1. This PE3W22509/HS-24 FAKRA female to MMCX male cable assembly is built with RG188, which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with right angle FAKRA to right angle MMCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3W22509/HS-24 can also be used in the other direction and will be a right angle MMCX plug to right angle FAKRA jack cable assembly if the opposite connectivity is required. This FAKRA right angle female to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to MMCX cable assembly for quick shipment worldwide. Variations of FAKRA and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to MMCX RF cable assembly as per your requirements. |
| 860 | |
| PE3W22509/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Blue FAKRA Jack Right Angle to MMCX Plug Right Angle Cable 12 Inch Length Using RG188 Coax with HeatShrink., Pasternack’s PE3W22509/HS-12 right angle FAKRA jack to right angle MMCX plug RF cable assembly using RG188 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The FAKRA jack to MMCX plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle FAKRA cable connection on one end and a right angle MMCX cable connection on the other. Our FAKRA to MMCX cable assembly has a jack gender on end 1 and a plug on end 2. PE3W22509/HS-12 can also be known as a right angle FAKRA female to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W22509/HS-12 RF cable has a ptfe jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. Our right angle FAKRA jack to right angle MMCX plug cable has a maximum VSWR of 1.4:1. This PE3W22509/HS-12 FAKRA female to MMCX male cable assembly is built with RG188, which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with right angle FAKRA to right angle MMCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3W22509/HS-12 can also be used in the other direction and will be a right angle MMCX plug to right angle FAKRA jack cable assembly if the opposite connectivity is required. This FAKRA right angle female to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to MMCX cable assembly for quick shipment worldwide. Variations of FAKRA and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to MMCX RF cable assembly as per your requirements. |
| 860 | ||
| PE3W22509/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Blue FAKRA Jack Right Angle to MMCX Plug Right Angle Cable 48 Inch Length Using RG188 Coax with HeatShrink., Pasternack’s PE3W22509/HS-48 right angle FAKRA jack to right angle MMCX plug RF cable assembly using RG188 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The FAKRA jack to MMCX plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle FAKRA cable connection on one end and a right angle MMCX cable connection on the other. Our FAKRA to MMCX cable assembly has a jack gender on end 1 and a plug on end 2. PE3W22509/HS-48 can also be known as a right angle FAKRA female to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W22509/HS-48 RF cable has a ptfe jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. Our right angle FAKRA jack to right angle MMCX plug cable has a maximum VSWR of 1.4:1. This PE3W22509/HS-48 FAKRA female to MMCX male cable assembly is built with RG188, which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with right angle FAKRA to right angle MMCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 48-inch-long RF cable are available on our downloadable PDF datasheet. PE3W22509/HS-48 can also be used in the other direction and will be a right angle MMCX plug to right angle FAKRA jack cable assembly if the opposite connectivity is required. This FAKRA right angle female to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to MMCX cable assembly for quick shipment worldwide. Variations of FAKRA and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to MMCX RF cable assembly as per your requirements. |
| 860 | ||
| PE3W22509/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. Blue FAKRA Jack Right Angle to MMCX Plug Right Angle Cable 72 Inch Length Using RG188 Coax with HeatShrink., Pasternack’s PE3W22509/HS-72 right angle FAKRA jack to right angle MMCX plug RF cable assembly using RG188 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The FAKRA jack to MMCX plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle FAKRA cable connection on one end and a right angle MMCX cable connection on the other. Our FAKRA to MMCX cable assembly has a jack gender on end 1 and a plug on end 2. PE3W22509/HS-72 can also be known as a right angle FAKRA female to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W22509/HS-72 RF cable has a ptfe jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. Our right angle FAKRA jack to right angle MMCX plug cable has a maximum VSWR of 1.4:1. This PE3W22509/HS-72 FAKRA female to MMCX male cable assembly is built with RG188, which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with right angle FAKRA to right angle MMCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 72-inch-long RF cable are available on our downloadable PDF datasheet. PE3W22509/HS-72 can also be used in the other direction and will be a right angle MMCX plug to right angle FAKRA jack cable assembly if the opposite connectivity is required. This FAKRA right angle female to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to MMCX cable assembly for quick shipment worldwide. Variations of FAKRA and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to MMCX RF cable assembly as per your requirements. |
| 815 | ||
| M39012/25-0006 | Pasternack Enterprises | Key Specifications, Connector Series: BNC, Connector Gender: Male, Chain Option: Chain. BNC Male Open Circuit Connector Cap With 2.25 Inch Chain. Pasternack’s M39012/25-0006 RF coaxial connector cap (which can also be referred to as an RF connector dust cap in some cases) is available in a non-shorting design. This non-shorting RF connector cap has a BNC connector series and a male gender. Our BNC male non-shorting connector cap is manufactured with a brass body material and silver body plating. Our silver-plated dust cap comes with a 2.25-inch long chain to prevent loss and misplacement. Our M39012/25-0006 dust cap has a length of 0.67 inches, a width of 3.9 inches, and a height of 0.6 inches. These RF connector dust caps are essential for precision connectors to protect them from dust, corrosion, and other potential damage. Additional dimensions and specifications for this BNC male connector cap are on our downloadable PDF datasheet above. Our coaxial non-shorting protective dust cap is just one part of over one million RF components supplied by Pasternack. The M39012/25-0006 connector dust cap is in stock and will ship on the same business day as purchased. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF connector dust cap for your requirements. |
| 32 | ||
| M39012/25-0007 | Pasternack Enterprises | Key Specifications, Connector Series: BNC, Connector Gender: Male, Chain Option: Chain. BNC Male Open Circuit Connector Cap with 2.7 Inch Chain. Pasternack’s M39012/25-0007 RF coaxial connector cap (which can also be referred to as an RF connector dust cap in some cases) is available in a non-shorting design. This non-shorting RF connector cap has a BNC connector series and a male gender. Our BNC male non-shorting connector cap is manufactured with a brass body material and silver body plating. Our silver-plated dust cap comes with a 2.7-inch long chain to prevent loss and misplacement. Our M39012/25-0007 dust cap has a length of 0.67 inches, a width of 3.9 inches, and a height of 0.6 inches. These RF connector dust caps are essential for precision connectors to protect them from dust, corrosion, and other potential damage. Additional dimensions and specifications for this BNC male connector cap are on our downloadable PDF datasheet above. Our coaxial non-shorting protective dust cap is just one part of over one million RF components supplied by Pasternack. The M39012/25-0007 connector dust cap is in stock and will ship on the same business day as purchased. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF connector dust cap for your requirements. |
| 7 | ||
| PE3C8322-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to N Female Bulkhead Low PIM Cable 50 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male to N female bulkhead low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to N female bulkhead low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM 7/16 DIN to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8322-50CM can also be known as a low PIM 7/16 DIN plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8322-50CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 150 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 7/16 DIN male to bulkhead type N female cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N jack cable assembly PE3C8322-50CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8322-50CM can also be used in the other direction and will be a type N female bulkhead to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W02250 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male to BNC Male Right Angle Cable Using RG316 Coax. PE3W02250 is a SMA male to BNC male right angle cable using RG316 coax. This Pasternack SMA male to BNC male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. SMA to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02250 SMA male to BNC male right angle cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W02250/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to SMA Male Cable Using RG316 Coax with HeatShrink. PE3W02250/HS is a BNC male right angle to SMA male cable using RG316 coax. This Pasternack BNC male right angle to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. BNC right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02250/HS BNC male right angle to SMA male cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W22508/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Black FAKRA Jack to SSMA Male Cable Using LMR-100 Coax with HeatShrink. PE3W22508/HS is a FAKRA jack to SSMA male cable using LMR-100A coax. This Pasternack FAKRA jack to SSMA male cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm SSMA for connector 2. Our jack FAKRA to male SSMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22508/HS FAKRA jack to SSMA male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W22500 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Cable Using LMR-195 Coax. PE3W22500 is a SMA male to SMA female cable using LMR-195 coax. This Pasternack SMA male to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22500 SMA male to SMA female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W22501 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm. N Female to N Female Bulkhead Cable Using 1/4 inch Superflexible Coax. PE3W22501 is a N female to N female bulkhead cable using 1/4" Superflexible coax. This Pasternack N female to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N to female N bulkhead cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W22501 N female to N female bulkhead cable assembly is constructed with 1/4" Superflexible coax. | 0 | |||
| PE3W22505 | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SHV Plug to SHV Plug Right Angle Cable Using RG174 Coax. PE3W22505 is a SHV plug to SHV plug right angle cable using RG174 coax. This Pasternack SHV plug to SHV plug right angle cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm SHV for connector 2. SHV to SHV right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SHV to plug SHV right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22505 SHV plug to SHV plug right angle cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W22509 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to Blue FAKRA Jack Right Angle Cable Using RG188 Coax. PE3W22509 is a MMCX plug right angle to FAKRA jack right angle cable using RG188 coax. This Pasternack MMCX plug right angle to FAKRA jack right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm FAKRA for connector 2. MMCX right angle to FAKRA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to jack FAKRA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22509 MMCX plug right angle to FAKRA jack right angle cable assembly is constructed with RG188 coax. | 0 | |||
| PE3W00322-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. TNC Male to SMB Plug Right Angle Cable 50 cm Length Using RG174 Coax., Radio frequency assembly TNC male to SMB plug right angle cable 50 cm length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to SMB plug right angle cable 50 cm length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and right angle SMB cable connection on the other. Our TNC to right angle SMB cable assemblies have a male gender on end 1 and plug on end 2. This TNC to SMB cable is a male to plug coax assembly, PE3W00322-50CM, can also be known as a TNC plug to right angle SMB male cable assembly and will be shipped same-day as it is purchased. TNC plug to SMB male cable assembly PE3W00322-50CM is built with RG174 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency TNC male to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00322-50CM can also be used in the other direction and will be right angle SMB plug to TNC male cable assembly if the opposite connectivity is required. TNC plug to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMB cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to SMB plug right angle cable 50 cm length using RG174 coax. |
| 0 | ||
![]() Teledyne HiRel | 5962-9222505M3A![]() | Teledyne HiRel | BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | ||
5962-9222501M3A![]() | Teledyne HiRel | BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | |||
5962-9222501MLA![]() | Teledyne HiRel | BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | |||
| 5962-9222503MKA | Teledyne HiRel | BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | |||
5962-9222503MLA![]() | Teledyne HiRel | BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | |||
5962-9222505MLA![]() | Teledyne HiRel | BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | |||
5962-9222503M3A![]() | Teledyne HiRel | BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | |||
| 5962-9222501MKA | Teledyne HiRel | BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | |||
| 5962-9222505MKA | Teledyne HiRel | BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | |||
![]() Wuhan P&S | NCS2250SQ2T2G | onsemi | Low Voltage Comparator RoHS : Compliant |
| 3,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |