2004-1-4-LP-R Price, Distributor, Stock

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to N Male Low Loss Cable 48 Inch Length Using LMR-400-DB Coax with Times Microwave Components., Radio frequency assembly SMA male to N male low loss cable 48 inch length using LMR-400-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 48 inch length using LMR-400-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C3200-48 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3C3200-48 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3200-48 can also be used in the other direction and will be N type male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 48 inch length using LMR-400-DB coax with Times Microwave components.

1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15

1,701

PE3W07200-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 7/16 DIN Male to N Female Cable 48 Inch Length Using RG8 Coax., Radio frequency assembly 7/16 DIN male to N female cable 48 inch length using RG8 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to N female cable 48 inch length using RG8 coax, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and type N cable connection on the other. Our 7/16 DIN to type N cable assemblies have a male gender on end 1 and female on end 2. PE3W07200-48 can also be known as a 7/16 DIN plug to type N jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N jack cable assembly PE3W07200-48 is built with RG8 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 7/16 DIN male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07200-48 can also be used in the other direction and will be type N female to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to N female cable 48 inch length using RG8 coax.

1 : $338.99
25 : $322.04
50 : $305.09
100 : $291.53

236

PE3C4200-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male Right Angle to N Female Bulkhead Low Loss Cable 48 Inch Length Using PE-C400 Coax., Radio frequency assembly N male right angle to N female bulkhead low loss cable 48 inch length using PE-C400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N female bulkhead low loss cable 48 inch length using PE-C400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and N type bulkhead cable connection on the other. Our low loss right angle type N to type N cable assemblies have a male gender on end 1 and female on end 2. PE3C4200-48 can also be known as a low loss right angle N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3C4200-48 is built with PE-C400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type right angle male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4200-48 can also be used in the other direction and will be type N female bulkhead to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female bulkhead low loss cable 48 inch length using PE-C400 coax.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

132

PE3TC1200-48

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: PE-SF200LL75, RF Cable Type: PE-SF200LL75, RF Cable Impedance: 75 Ohm, Length: 48 inches. 75 Ohm N Male to 75 Ohm N Male Low Frequency Cable 48 Inch Length Using 75 Ohm PE-SF200LL75 Coax, RoHS., Radio frequency assembly 75 Ohm N male to 75 Ohm N male low frequency cable 48 inch length using 75 Ohm PE-SF200LL75 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 75 Ohm N male to 75 Ohm N male low frequency cable 48 inch length using 75 Ohm PE-SF200LL75 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3TC1200-48, can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3TC1200-48 is built with PE-SF200LL75 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 75 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm N male low frequency cable 48 inch length using 75 Ohm PE-SF200LL75 coax, RoHS.

1 : $342.99
25 : $325.84
50 : $308.69

PE15A2004

Pasternack Enterprises

1 : $9,160.0
5 : $8,793.6
10 : $8,427.2

PE5SC2004

Pasternack Enterprises

1 : $791.99
10 : $760.31
25 : $728.63

PE70A2004

Pasternack Enterprises

Key Specifications, Design: Voltage Variable, Maximum Frequency: 50 GHz, Impedance: 50, VSWR Maximum: 2, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Series 2: 2.4mm, Connector Gender 2: Female, Minimum Attenuation: 0, Maximum Attenuation: 0. 20 GHz to 50 GHz Absorptive Voltage Variable Attenuator, 40 dB, Field Replaceable 2.4mm. Pasternack’s PE70A2004 is an active voltage variable attenuator constructed to reduce the amplitude level of an incoming signal. This high-reliability voltage variable attenuator comes with a 50 Ohm impedance and has a 24 dBm typical input power. Our solder pin control RF attenuator offers frequency coverage from 20 GHz to 50 GHz. This threaded RF digital attenuator has a female connector gender configuration for input and output ports. The PE70A2004 voltage variable attenuator is ideal for test & measurement, military and commercial communications, military electronic systems and research & development applications. This active radio frequency attenuator has an operational temperature range from -40 deg C to 85 deg C. This PE70A2004 attenuator with field replaceable 2.4mm female connectors from Pasternack has an aluminum body with gold plating. Our solder pin control RF attenuator comes with a 2:1 maximum VSWR along with 0.03 Amps maximum DC current. The PE70A2004 radio frequency attenuator has 4 dB typical insertion loss. This voltage variable RF attenuator is designed to meet environmental test conditions for altitude, vibration, humidity and shock. Pasternack can ship active RF attenuators from stock the same day you order them. We offer the broadest and deepest inventory of RF and microwave components available. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality voltage variable radio frequency attenuator that meets your requirements.

1 : $7,960.0
5 : $7,641.6
10 : $7,323.2
25 : $7,004.8

PE34200-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401AL-STRAIGHT, RF Cable Type: PE-SR401AL-STRAIGHT, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to SMA Male Right Angle Cable 48 Inch Length Using PE-SR401AL Coax., Radio frequency assembly SMA male to SMA male right angle cable 48 inch length using PE-SR401AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 48 inch length using PE-SR401AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34200-48, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34200-48 is built with PE-SR401AL-STRAIGHT which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34200-48 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 48 inch length using PE-SR401AL coax.

1 : $265.99
25 : $252.69
50 : $239.39

PE3W20042

Pasternack Enterprises

PE3W20042/HS

Pasternack Enterprises

PE3W22004

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. MMCX Plug to SMA Female 4 Hole Flange Cable Using LMR-100A-UF Coax. PE3W22004 is a MMCX plug to SMA female 4 hole flange cable using LMR-100A-UF coax. This Pasternack MMCX plug to SMA female 4 hole flange cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. Our plug MMCX to female SMA 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22004 MMCX plug to SMA female 4 hole flange cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE82P2004

Pasternack Enterprises

Key Specifications. Connector In Series SMA Connector In Gender Female Connector In Impedance 50 Ohm Connector Out Series SMA Connector Out Gender Female Maximum VSWR 2.8:1 Maximum Insertion Loss 5.5 dB Maximum Power 27 Watts. Analog Phase Shifter, 2 GHz to 4 GHz, 360 degree Phase Range, 0V to +10V Control Voltage, Max Pin +27 dBm, SMA. Pasternack analog phase shifter PE82P2004 is part of our large selection of in-stock RF, microwave and millimeter wave components available for purchase. This analog phase shifter is manufactured with SMA connectors and has a phase adjustment of 360 degrees. Our SMA analog phase shifter has a minimum frequency of 2 GHz and a maximum frequency of 4 GHz. SMA coaxial RF analog phase shifter has a maximum input power of 27 watts and a maximum VSWR of 2.8:1. PE82P2004 coaxial SMA analog phase shifter is one of over 40,000 RF components supplied by Pasternack. Our analog phase shifter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $5,240.0
5 : $5,030.4
10 : $4,820.8
25 : $4,611.2

PE88D2004

Pasternack Enterprises

Key Specifications, Input Frequency (Sine Wave) min: 100 MHz, Input Frequency (Sine Wave) max: 24 GHz, Output Frequency (Square Wave) min: 50 MHz, Output Frequency (Square Wave) max : 12 GHz, Divide by Ratio: 2, Output Power typ: 0, Absolute Max Input Power: 13 dBm, Operating DC Voltage typ: 12. Frequency Divider, Divide by 2 Prescaler Module, 100 MHz to 24 GHz, SMA. The PE88D2004 divide-by-2 prescaler frequency divider module from Pasternack has a 50 Ohm impedance. Our frequency divider has threaded SMA female connectors. This 50 Ohm connectorized frequency divider can operate at temperatures ranging from -40 to +85 deg C. Our prescaler frequency divider module has an input frequency range of 100 MHz to 24 GHz and an output frequency range of 50 MHz to 12 GHz. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s coax frequency divider has a typical phase noise of -150 dBc/Hz at 100kHz offset. This SMA female frequency divider comes with an 50 Ohm impedance and a maximum input power rating (CW) of 13 dBm. The prescaler frequency divider module is powered by DC voltage ranging from 9 to 15 Vdc with a supply current of 90 mA. This frequency divider has an overall length of 1.25 inches, a width of 1.25 inches, and a weight of 0.085 lbs. Our connectorized frequency divider is suitable for aerospace & defense, test & measurement, microwave radio systems, military & commercial communication systems, research & development, SATCOM and wireless communications applications. This frequency divider PE88D2004 from Pasternack is manufactured with an SMA input connector. Our frequency divider has a storage temperature ranging from -55 to +105 deg C. Additional dimensions and specifications for this divided-by-2 prescaler frequency divider module is on our downloadable PDF datasheet above. Pasternack’s 50 Ohm prescaler frequency divider module with a maximum input power (CW) rating of 13 dBm is in stock and currently available for purchase. Our connectorized frequency divider is part of over one million RF, microwave, and millimeter wave components ready for same-day shipment anywhere in the world. For further information on similar products, our expert technical support and trained sales team can get you to the ideal prescaler frequency divider module as per your requirements.

1 : $2,680.0
5 : $2,572.8
10 : $2,465.6
25 : $2,358.4

PE80L2004

Pasternack Enterprises

Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 8 GHz, Maximum Frequency: 12 GHz, Maximum Insertion Loss: 1.2 dB, Design Type: High Power, Peak Power: 100 Watt, Connector Option: Field Replaceable, Leakage (CW): 18 dBm, Recovery Time : 15,000 ns. High Power Limiter, Field Replaceable SMA, 100W Peak Power, 15 us Recovery, 18 dBm Flat Leakage, 8 GHz to 12 GHz., Pasternack ships all of our products, including the PE80L2004 high power field replaceable broadband signal limiter same-day, internationally. This SMA series limiter has a maximum peak power of 100W at 10µs Pulse Width 5% Duty Cycle and Pasternack aims to keep our product inventory consistently stocked. The 100W limiter has SMA female to SMA type connectors with a dense but rugged, thin-film construction. Pasternack’s PE80L2004 high power field replaceable high-power limiter features an impressive maximum insertion loss of 1.2 dB. The PE80L2004 SMA to SMA limiter has a typical recovery time of 15,000 nanoseconds. Pasternack’s PE80L2004 100W limiter has a 1.2 dB maximum insertion loss, and a minimum operational temperature range of 0 degrees C to a maximum of 50°C. PE80L2004 is a RF high power 100W at 10µs Pulse Width 5% Duty Cycle limiter intended for use in space systems, VSAT, SATCOM, radar, and microwave radio applications. Our high-quality SMA to SMA limiters that we ship around the world, have a broadband frequency of 8 GHz – 12 GHz. Download the field replaceable high power 100W PE80L2004 PDF datasheet with specifications and CAD drawing with dimensions for detailed technical information. Our PE80L2004 has an average input power of 3 and a military-grade design. In fact, this 12 GHz 100W high-rel limiter meets the US Department of Defense environmental test methods for humidity of MIL-STD-202F, Method 103B, Condition B and vibration of MIL-STD-202F, Method 204D, Condition B. Get in touch with Pasternack’s expert technical support for assistance with the high power 100W PE80L2004 broadband limiter. Founded in 1972, Pasternack has continued to meet the needs of its customers providing 8 (GHz) – 12 (GHz) high power limiters as well as a plethora of other electronic components. Pasternack’s knowledgeable sales team simplifies the checkout process and certifies that your 8 GHz – 12 GHz 3 average input power high-reliability broadband limiter will be exact to spec. PE80L2004 has a max leakage of 18 dBm and is part of our vast inventory of electronic products. This SMA female to SMA limiter is ready for purchase and ships anywhere in the world. Order your high power field replaceable 100W limiter online today—there is no minimum order quantity and we provide same day shipping.

1 : $1,410.0
5 : $1,353.6
10 : $1,297.2

PE3W20044

Pasternack Enterprises

Key Specifications, Connector Series 1: SC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. SC Male Right Angle to SC Male Cable Using RG214 Coax. PE3W20044 is a SC male right angle to SC male cable using RG214 coax. This Pasternack SC male right angle to SC male cable assembly uses a 50 Ohm SC for connector 1 and a 50 Ohm SC for connector 2. SC right angle to SC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SC right angle to male SC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20044 SC male right angle to SC male cable assembly is constructed with RG214 coax.

Venkel Ltd.

MELFC0204-ZE-2004FT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�25PPM;2M;�1%
RoHS : Compliant

TFCR1206-8W-C-2004BT-1K

VENKEL LTD

Thin Film CR;1206;1/8W;�50PPM;2M;�0.1%
RoHS : Compliant

TFCR1210-4W-K-2004CT-1K

VENKEL LTD

Thin Film CR;1210;1/4W;�100PPM;2M;�0.25%
RoHS : Compliant

TFCR2512-2W-K-2004DT

VENKEL LTD

Thin Film CR;2512;1/2W;�100PPM;2M;�0.5%
RoHS : Compliant

MELFC0204-TC-2004DT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;2M;�0.5%
RoHS : Compliant

PWCR0805-RK-2004FT

VENKEL LTD

Pulse Withstanding CR;0805;1/8W;�100PPM;2M;�1%
RoHS : Compliant

TFCR0805-10W-C-2004BT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;2M;�0.1%
RoHS : Compliant

TFCR0805-10W-K-2004FT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;2M;�1%
RoHS : Compliant

TFCR1206-8W-C-2004BT

VENKEL LTD

Thin Film CR;1206;1/8W;�50PPM;2M;�0.1%
RoHS : Compliant

MELFC0207-XC-2004FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�50PPM;2M;�1%
RoHS : Compliant

CR0805-10W-2004DT

VENKEL LTD

Chip Resistor;0805;1/10W;2M;�0.5%
RoHS : Compliant

TFCR0805-10W-K-2004DT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;2M;�0.5%
RoHS : Compliant

TFCR0805-10W-C-2004DT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;2M;�0.5%
RoHS : Compliant

TFCR1210-4W-C-2004BT-1K

VENKEL LTD

Thin Film CR;1210;1/4W;�50PPM;2M;�0.1%
RoHS : Compliant

TFCR1210-4W-C-2004CT

VENKEL LTD

Thin Film CR;1210;1/4W;�50PPM;2M;�0.25%
RoHS : Compliant

Vyrian

AP2004SL-13

Diodes Incorporated

Switching Controller, Voltage-mode, 0.2A, 300kHz Switching Freq-Max, BIPolar, PDSO8

17,339

LA50P12004

Littelfuse Inc

Electric Fuse, Fast Blow, 1200A, 500VAC, 450VDC, 200000A (IR), Inline/holder

12,415

LET20045C

STMicroelectronics

RF Power Field-Effect Transistor, 1-Element, L Band, Silicon, N-Channel, Metal-oxide Semiconductor FET
RoHS : Compliant

10,844

MAX20049ATEB-VY-T

Analog Devices (Maxim Integrated)

10,484

BQ7692004PWR

Texas Instruments

9,260

ULN2004AINSG4

Texas Instruments

9,048

MAX20043FGEEA-V

Analog Devices (Maxim Integrated)

8,806

ULN2004ADG4

Texas Instruments

Small Signal Bipolar Transistor, 0.5A I(C), 50V V(BR)CEO, 7-Element, NPN, Silicon, MS-012AC
RoHS : Compliant

8,748

SN72004P

Texas Instruments

Operational Amplifier, 1 Func, PDIP8
RoHS : Not Compliant

8,680

MAX20044EGEE-V-T

Analog Devices (Maxim Integrated)

8,585

XC3S200-4FGG320C

AMD Xilinx

Field Programmable Gate Array, 192 CLBs, 50000 Gates, PBGA320
RoHS : Compliant

3,974

XCV200-4PQ240C

AMD Xilinx

Field Programmable Gate Array, 1176 CLBs, 236666 Gates, 250MHz, 5292-Cell, CMOS, PQFP240
RoHS : Not Compliant

2,599

XA3S200-4VQG100I

AMD Xilinx

Field Programmable Gate Array, 480 CLBs, 200000 Gates, 125MHz, 4320-Cell, PQFP100
RoHS : Compliant

2,545

XC3S200-4FG456I

AMD Xilinx

Field Programmable Gate Array, 192 CLBs, 50000 Gates, PBGA456
RoHS : Not Compliant

1,426

PWM-200-48KN

Mean Well Enterprises

AC-DC Power Factor Correction Module, 1 Output, 200.1W, Hybrid

785

Waytek, Inc.

02-08-2004

Molex

Terminal Male MLX Loose Piece 14GA TO 20GA MOLEX 02-08-2004 REPLACED 31072 TYCO 350705-1
RoHS : Compliant

100 : $0.06
200 : $0.0544
500 : $0.0486
1,000 : $0.0439
5,000 : $0.042

175,601

19202-0049

Molex

12-10 GA Butt Connector Yellow Insulated Nylon
RoHS : Compliant

50 : $0.2927
200 : $0.2773
500 : $0.258
1,000 : $0.2478

58,947

12004943

Aptiv PLC

Fuse Block ATO ATC Body Delphi 12004943

4 : $2.5535
50 : $2.1453
100 : $1.6289
200 : $1.6184
500 : $1.6184

6,176

12004448

Aptiv PLC

Aptiv 12004448 rosebud clip for corrugated loom is a conduit-retention clip designed to secure loom to panels or mounting points. Its rosebud-style head supports organized harness routing and stable attachment in vehicle and equipment wiring applications.
RoHS : Compliant

50 : $0.1497
200 : $0.1417
500 : $0.1314
1,000 : $0.1264

3,839

0312004.MXP

Littelfuse Inc

4 Amp Fuses Glass AGC
RoHS : Compliant

50 : $0.3852
200 : $0.3652
500 : $0.3552
1,000 : $0.3452

1,560

32004-TP2

Eaton Electronics

Terminal Position Assurance Sealed Version 32004-TP2 BUSSMANN VEC

10 : $1.1755
50 : $1.1294
100 : $1.089
200 : $1.0372
500 : $1.0026
1,000 : $0.9681

1,371