| Electronic Components Datasheet Search |
|
1785L-S08-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 61817850 | Lapp Group | Marker: cable; Marking: 5; 1.3÷3mm; PVC; yellow; push-in; FLEXIMARK® |
| 600 | |
| 1291785 | Bossard Group | Circlip; spring steel; Shaft dia: 32mm; BN 830; black finish RoHS : Compliant |
| 30 | ||
| K2017852 | TE Connectivity | Microswitch SNAP ACTION; IP67; Leads: single RoHS : Not Compliant |
| 16 | ||
| 1785142000 | Weidmüller Interface GmbH & Co. KG | Plug; PIN: 2; female; IP67; Type: shielded; 20m; PVC RoHS : Compliant |
| 5 | ||
| LT1785IS8#PBF | Analog Devices Inc | IC: interface; transceiver; half duplex,RS422 / RS485; 250kbps RoHS : Compliant |
| 0 | ||
| SLW-178562-3A-S-D | Same Sky | Switch: slide; Pos: 3; SP3T; 0.3A/50VDC; MBB (shorting),ON-ON-ON RoHS : Compliant |
| 0 | ||
| 10051785 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 15; SMT; 3A; 250V |
| 0 | ||
| 817858-SF | TE Connectivity | Connector: AC supply; socket; male; power supply; Inom: 15A; 250VAC |
| 0 | ||
LPC1785FBD208K![]() | NXP Semiconductors | IC: ARM microcontroller; 80kBSRAM,256kBFLASH; LQFP208 RoHS : Compliant |
| 0 | ||
| X22 X 1785 | OPTIBELT GmbH | Wedge belt |
| 0 | ||
| SE-EF178-50MCXMG080SMAMG | Ingun Prufmittelbau GmbH | Connection cable; straight; 50Ω; 3GHz; 0.8m; MCX male,SMA male |
| 0 | ||
| SE-EF178-50MCXMW080 | Ingun Prufmittelbau GmbH | Connection cable; angled; 50Ω; 3GHz; 0.8m; MCX male |
| 0 | ||
| LT1785CS8#PBF | Analog Devices Inc | IC: interface; transceiver; full duplex,RS422 / RS485; 250kbps RoHS : Compliant |
| 0 | ||
| LT1785AIS8#PBF | Analog Devices Inc | IC: interface; transceiver; half duplex,RS422 / RS485; 250kbps RoHS : Compliant |
| 0 | ||
| ELM 1-785 | Bivar Inc | Spacer sleeve; LEDs,LED; Øout: 5.1mm; ØLED: 3mm,5mm; L: 19.94mm |
| 0 | ||
![]() Avnet Americas | 801-011-07NF17-85PC | Glenair Inc | - Bulk (Alt: 801-011-07NF17-85PC) RoHS : Not Compliant |
| 78 | |
| MKJ1A26F17-85PA | ITT Interconnect Solutions | - Bulk (Alt: MKJ1A26F17-85PA) RoHS : Not Compliant |
| 10 | ||
| MKJ1A2F17-85PA | ITT Interconnect Solutions | - Bulk (Alt: MKJ1A2F17-85PA) RoHS : Not Compliant |
| 10 | ||
| MKJ1A7F17-85SA | ITT Interconnect Solutions | - Bulk (Alt: MKJ1A7F17-85SA) RoHS : Not Compliant |
| 8 | ||
| MKJ1C7F17-85DA | ITT Interconnect Solutions | - Bulk (Alt: MKJ1C7F17-85DA) RoHS : Not Compliant |
| 7 | ||
| 801-007-16M17-85PB | Glenair Inc | - Bulk (Alt: 801-007-16M17-85PB) RoHS : Not Compliant |
| 0 | ||
| 217-8591-232 | ITT Interconnect Solutions | - Bulk (Alt: 217-8591-232) RoHS : Not Compliant |
| 0 | ||
| 217853-1000 | Molex | Antenna, Multi Band, 5.15GHz to 5.85GHz, Adhesive, 161mm x 115mm x 22.5mm, 217853 Series - Bulk (Alt: 2178531000) |
| 0 | ||
| 2M801-007-26MT17-85SA | Amphenol Corporation | - Bulk (Alt: 2M801-007-26MT17-85SA) RoHS : Not Compliant |
| 0 | ||
| 2M801-008-26MT17-85PA | Amphenol Corporation | - Bulk (Alt: 2M801-008-26MT17-85PA) RoHS : Not Compliant |
| 0 | ||
| 653V17856C2T | CTS Corporation | - Tape and Reel (Alt: 653V17856C2T) RoHS : Compliant |
| 0 | ||
| 653V17853I3T | CTS Corporation | - Tape and Reel (Alt: 653V17853I3T) RoHS : Compliant |
| 0 | ||
| 801-003-02NF17-85PN | Glenair Inc | - Bulk (Alt: 801-003-02NF17-85PN) RoHS : Not Compliant | 0 | |||
| 801-007-16C17-85BB | Glenair Inc | CIRC MGHTY MSE (80/60) - CIRCULAR MIGHTY MOUSE - Bulk (Alt: 801-007-16C17-85BB) RoHS : Not Compliant | 0 | |||
| 801-009-01C17-85PB | Glenair Inc | - Bulk (Alt: 801-009-01C17-85PB) RoHS : Not Compliant | 0 | |||
![]() Newark | 3-101-785 | Schurter Electronic Components | Pwr Entry Connector, Rcpt, 8.8A, Qc; |Schurter 3-101-785 RoHS : Compliant |
| 1,650 | |
| 10178547-102LF | Amphenol Communications Solutions | Conn, Temp Sensor, Female, 2P, 1A, 125V; Product Range:Rotasense Series; Sensor Connector Size:-; Sensor Connector Gender:Female; No. Of Positions:2 Positions; Sensor Contact Type:Socket; Ip/Nema Rating:-; Connector Coding:- RoHS : Not Compliant |
| 840 | ||
| GW-151785 | SPC Multicomp | Pwr Cord, R/A Cee 7/7 Plug-Iec C13, 2M; |Multicomp Pro GW-151785 RoHS : Compliant |
| 227 | ||
| 217851-1144 | Molex | Cable Assy, Ring Tongue-Free End, 300Mm; Connector To Connector:Perma-Seal Ring Tongue Terminal To Free End; Cable Length - Imperial:11.8"; Cable Length - Metric:300Mm; Product Range:Perma-Seal Ots 217851 Series Rohs Compliant: Yes |Molex 217851-1144 RoHS : Compliant |
| 200 | ||
| 217851-1116 | Molex | Cable Assy, Ring Tongue-Free End, 600Mm; Connector To Connector:Perma-Seal Ring Tongue Terminal To Free End; Cable Length - Imperial:23.6"; Cable Length - Metric:600Mm; Product Range:Perma-Seal Ots 217851 Series; Jacket Color:Black Rohs Compliant: Yes RoHS : Compliant |
| 200 | ||
| MAX17851AUP/V+ | Analog Devices Inc | Spi To Uart Bridge, -40 To 85Deg C; |Analog Devices, Inc. MAX17851AUP/V+ RoHS : Compliant |
| 159 | ||
| LT1785AHS8#PBF | Analog Devices Inc | Rs422/Rs485 Transceiver, -40 To 125Deg C; |Analog Devices, Inc. LT1785AHS8#PBF RoHS : Compliant |
| 97 | ||
| PT-11785 | BUD Industries Inc | Enclosure Plast Multipurpose Abs 127Mm; |Bud Industries PT-11785 RoHS : Compliant |
| 81 | ||
| 1785971 | Phoenix Contact | Terminal Block, Socket, 5Pos, Th; |Phoenix Contact 1785971 RoHS : Compliant |
| 74 | ||
| MAX17854ACB/V+ | Analog Devices Inc | Data Acquisition System, -40 To 125Deg C; |Analog Devices, Inc. MAX17854ACB/V+ RoHS : Compliant |
| 9 | ||
| EURO-MXPD-112-1521-120-1178-50 | Variohm EuroSensor | Sensor, Hall Effect/Rotary, Cw/Ccw, 120D; |Variohm Group EURO-MXPD-112-1521-120-1178-50 RoHS : Compliant |
| 5 | ||
| 801-007-16M17-85PA | Glenair Inc | Cir Conn, Crimp Pin, Cable Mount Plug; |Glenair 801-007-16M17-85PA RoHS : Compliant |
| 4 | ||
| 1785 | Ultimaker BV | 3D Printer Filament, Pp, 2.85Mm, Natural; |Ultimaker 1785 RoHS : Compliant |
| 0 | ||
| 1785 | Adafruit Industries | Medium Surface Transducer With Wires - 4 Ohm 3 Watt |Adafruit 1785 RoHS : Not Compliant |
| 0 | ||
| 1785 | Ultimaker BV | 3D Printer Filament, 2.85Mm, Natural; |Ultimaker 1785 RoHS : Compliant |
| 0 | ||
![]() Analog Devices Inc | MAX17851AUP/V+ | Analog Devices Inc | Automotive SPI to UART Bridge RoHS : Compliant |
| 11,199 | |
| MAX17852ACB/V+ | Analog Devices Inc | 14 Channel High-Voltage Data-A RoHS : Compliant |
| 6,856 | ||
| LT1785HS8#TRPBF | Analog Devices Inc | 60V Fault Protected RS485/RS42 RoHS : Compliant |
| 3,000 | ||
| MAX17854ACB/V+ | Analog Devices Inc | Automotive 14-Channel High-Vol RoHS : Compliant |
| 1,351 | ||
| MAX31785AETL+T | Analog Devices Inc | 6 CHANNEL INTELLIGENT FAN CONT RoHS : Compliant |
| 525 | ||
| MAX17851AUP/V+T | Analog Devices Inc | Automotive SPI to UART Bridge RoHS : Compliant |
| 300 | ||
| MAX31785ETL+ | Analog Devices Inc | 6-Channel Intelligent Fan Cont RoHS : Compliant |
| 253 | ||
| LT1785AHS8#PBF | Analog Devices Inc | 60V Fault Protected RS485/RS42 RoHS : Compliant |
| 22 | ||
| MAX31785AETL+ | Analog Devices Inc | 6 CHANNEL INTELLIGENT FAN CONT RoHS : Compliant |
| 22 | ||
| MAX17854EVKIT# | Analog Devices Inc | EVKIT for 14 Channel BMS IC | 9 | |||
| MAX17853EVKIT# | Analog Devices Inc | EVKIT for 14 Channel High-Volt RoHS : Compliant | 6 | |||
| LT1785AIN8#PBF | Analog Devices Inc | 60V Fault Protected RS485/RS42 RoHS : Compliant |
| 2 | ||
| LT1785AHS8#TRPBF | Analog Devices Inc | 60V Fault Protected RS485/RS42 RoHS : Compliant |
| 0 | ||
| MAX31785ETL+T | Analog Devices Inc | 6-Channel Intelligent Fan Cont RoHS : Compliant | 0 | |||
| LT1785HN8#PBF | Analog Devices Inc | 60V Fault Protected RS485/RS42 RoHS : Compliant |
| 0 | ||
![]() RS | 178507 | RS Pro | CABLE TIE NATURAL NON-RELEASABLE 50 LBS (22KG) 14.5 X 0.2 IN (368 X 4.8MM) |
| 735 | |
| 217-8516-001 | ITT Interconnect Solutions | CONN CIRC RECEPTACLE JAM NUT FOR SPECIAL WALL THICKNESS 2.0-5.0MM APD SER CIRC |
| 478 | ||
| 178513 | RS Pro | CABLE TIE NATURAL NON-RELEASABLE 121.3 LB (55KG) 15 X 0.3 IN (385 X 7.6MM) |
| 346 | ||
| 1785955 (ICV 2 5/ 3-G-5 08) | Phoenix Contact | PLUGGABLE HEADER 5.08MM 12AWG 320V 12A 3 POSITION COMBICON ICV SERIES |
| 50 | ||
| 1201785 | Phoenix Contact | NUT RoHS : Compliant |
| 44 | ||
| FN2640-20-08-C11 (821785) | TE Connectivity | EMC/EMI FILTER, IEC INLET, 250 VAC, M4 SCREW, 20A, FN2640 SERIES |
| 20 | ||
| RT-100 (301785-000-HT) | Smiths Interconnect | INERTION TOOL FLUSH FOR R-100 SERIES |
| 15 | ||
| 6117851 | RS Pro | PLATINUM RTD PT100 SOLDER TERMINATION 0.3IN PLATINUM PROBE -200 TO +650C |
| 5 | ||
| 2691785 | RS Pro | CABLE TIE 203X4.8 BLACK FLAME RETARDANT |
| 4 | ||
| 82_MMBX-S50-0-1/111_NE (23001785) | HUBER+SUHNER | RF CONNECTOR, MMBX STRAIGHT PCB JACK(F) |
| 4 | ||
| PIF46UHF (51785) | Banner Engineering Corp | FIBER OPTICS, PLASTIC FIBER, OPPOSED, LENGTH 18M |
| 3 | ||
| 8111785 | RS Pro | CABLE TIE NATURAL NYLON66 NON-RELEASABLE 4.4 X 0.1 IN (111 X 2.6MM) |
| 2 | ||
| 1785023 | RS Pro | SINGLE DPCO ASYMMETRICAL CYCLIC TIMER, 8 PIN PLUG IN, LED INDICATION, 12V AC/DC |
| 1 | ||
| 1785 | Edwards Signaling | SWITCH, PUSHBTN;WEATHERPROOF;EQUIPMENT SURFACE MOUNT;NO;GRAY |
| 0 | ||
| 1785 | Adafruit Industries | MEDIUM SURFACE TRANSDUCER WITH WIRES - 4 OHM 3 WATT |
| 0 | ||
![]() Microchip Technology Inc | TFS1785 | Microchip Technology Inc | TFS1785, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | ||
| MIC2178-5.0YWM | Microchip Technology Inc | 2.5A 200kHz Synchronous Switcher, SOIC, Projected EOL: 2028-10-18 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC2178-5.0YWM-TR | Microchip Technology Inc | 2.5A 200kHz Synchronous Switcher, SOIC, Projected EOL: 2028-10-18 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Rochester Electronics | LPC1785FBD208K![]() | NXP Semiconductors | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 256kB (256k x 8) 120MHz 208-QFP Tray RoHS : Compliant |
| 20,340 | |
LPC1785FBD208,551![]() | NXP Semiconductors | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 256kB (256k x 8) 120MHz 208-QFP Tray RoHS : Compliant |
| 6,740 | ||
| 2SA1785E-AN | onsemi | Trans BJTs Single 400V 1A SC-71 RoHS : Compliant |
| 7,500 | ||
| LT1785AIN8#PBF | Analog Devices Inc | IC INTERFACE Transceiver RS422, RS485 250kbps 4.75V - 5.25V 8-DIP Tube RoHS : Compliant |
| 35 | ||
| LT1785ACN8#PBF | Analog Devices Inc | IC INTERFACE Transceiver RS422, RS485 250kbps 4.75V - 5.25V 8-DIP Tube RoHS : Compliant |
| 500 | ||
| LT1785AIS8#PBF | Analog Devices Inc | IC INTERFACE Transceiver RS422, RS485 250kbps 4.75V - 5.25V 8-SOIC Tube RoHS : Compliant |
| 2 | ||
| LT1785ACS8#PBF | Analog Devices Inc | IC INTERFACE Transceiver RS422, RS485 250kbps 4.75V - 5.25V 8-SOIC Tube RoHS : Compliant |
| 34 | ||
| MAX17859ACB/V+CQP | Analog Devices Inc | 14 Channel High-Voltage Data-Acquisition |
| 130 | ||
SN65HVD1785D![]() | Texas Instruments | IC INTERFACE Transceiver RS422, RS485 115kbps 4.5V - 5.5V 8-SOIC Tube RoHS : Compliant |
| 16 | ||
| MIC2178-5.0BWM | Micrel Inc | IC VOLT REG Fixed Step-Down Buck 1 OUT 5V 2.5A 20-SOIC Tube RoHS : Not Compliant |
| 13,219 | ||
| MIC2178-5.0YWM | Micrel Inc | IC VOLT REG Fixed Step-Down Buck 1 OUT 5V 2.5A 20-SOIC Tube RoHS : Compliant |
| 5,798 | ||
![]() Sager | 1785845 | Phoenix Contact | MSTB 2 5/ 2-ST BU PLUG COMPONENT NOMINAL CURRENT: 12 A NUMBER OF POSITIONS: 2 PITCH: 5 MM CONNECTION METHOD: SCREW CONNECTION WITH TENSION SLEEVE COLOR: BLUE CONTACT SURFACE: TIN RoHS : Compliant |
| 0 | |
| 1785971 | Phoenix Contact | Pluggable Terminal Blocks 5 Pos 5.08mm pitch Thru Hole Invert Hdr RoHS : Compliant |
| 0 | ||
| AP1-785-1 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 8861017850 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 5767178-5 | TE Connectivity | Board to Board & Mezzanine Connectors MICTOR RAISED VERT RECPT ASSY, RoHS : Compliant | 0 | |||
| 2178511132 | Molex | Specialized Cables PERMA-S RING 150MM 16AWG M5 RoHS : Compliant |
| 0 | ||
| 0395178512 | Molex | Pluggable Terminal Blocks 3.81MM EURO PLUG VERT ME FWE GRN AU 12CK | 0 | |||
| 0395178511 | Molex | Pluggable Terminal Blocks 3.81MM EURO PLUG VERT ME FWE GRN AU 11CK | 0 | |||
| 1201785 | Phoenix Contact | Terminal Block Tools & Accessories GLM 6 RoHS : Compliant |
| 0 | ||
| 020317850206-M | TE Connectivity | SI-750-4000-206 | 0 | |||
| 7-2151785-7 | TE Connectivity | Crimpers / Crimping Tools OC-078F102F-CRIMP TOOLING KIT |
| 0 | ||
| 70152-1785 | ARATAS Americas | DIP Switches / SIP Switches SGE-365-2-3000 05000C | 0 | |||
| 1200661785 | Molex | Sensor Cables / Actuator Cables MIC 4P M/MFE 1.5M ST/90 18/4 TPE RoHS : Compliant |
| 0 | ||
| 2-817854-0 | TE Connectivity | Bench Top Tools CRIMPER, WIRE | 0 | |||
| 2178531-1 | TE Connectivity | Heavy Duty Power Connectors CROWN CLIP JUNIOR CONNECTOR RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | SN65HVD1785DR![]() | Texas Instruments | SN65HVD Series 3.3 to 5 V 0.115 Mb/s 6 mA Fault-Protected RS-485 Transceiver - SOIC-8 RoHS : Compliant | 5,000 | ||
| MAX31785ETL+ | Analog Devices Inc | 6-Channel Intelligent Fan Controller RoHS : Compliant | 126 | |||
![]() ComSIT USA | LT1785CS8TRPBF | Linear Technology | IC INTERFACE Transceiver RS422, RS485 250kbps 4.75V - 5.25V 8-SOIC T/R RoHS : Compliant | 1,485 | ||
| LFSPXO017856BULK | IQD Frequency Products | CRYSTAL OSC XO (Standard) HCMOS 33MHz 2.97V ~ 3.63V �100ppm 4-SMD RoHS : Compliant | 400 | |||
LT1785IS8![]() | Linear Technology | 60V FAULT PROTECTED RS485/RS422 TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Not Compliant | 350 | |||
| MAX17859ACBV+TCQP | Maxim Integrated Products | Multi-Cell Li-Ion Battery Pack Monitor, I�C interface, QFN-32, for battery management and protection applications RoHS : Compliant | 205 | |||
| 1785968V0 | Phoenix Contact | HEADER Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 150 | |||
| LT1785AIS8PBF | Linear Technology | 60V FAULT PROTECTED RS485/RS422 TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Compliant | 103 | |||
| LT1785CS8PBF | Linear Technology | 60V FAULT PROTECTED RS485/RS422 TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Compliant | 87 | |||
LT1785ACS8![]() | Linear Technology | 60V FAULT PROTECTED RS485/RS422 TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Not Compliant | 33 | |||
![]() Interstate Connecting Components | 217853-1000 | Molex | MULTI HUB 7in1 ANTEN,ADHSV MT 1.0M SMA MALE, |
| 10 | |
| 217-8591-232 | ITT Interconnect Solutions | 217-8591-232 | 0 | |||
| 801-003-02NF17-85PN | Glenair Inc | 0 | ||||
| 801-007-16C17-85BB | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-007-16M17-85PA-429C | Glenair Inc | PLG BND PLTFRM 85#23 PIN ADD $$ NASA SCREEN | 0 | |||
| 801-007-16M17-85PB | Glenair Inc | PLG BND PLTFRM 85#23 PIN Al RoHS : Compliant |
| 0 | ||
| 801-009-01C17-85PB | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-009-01M17-85AA | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-009-01NF17-85PC | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 801-009-01ZN17-85AB | Glenair Inc | 0 | ||||
| 801-009-02C17-85BA | Glenair Inc | 0 | ||||
| 801-009-02M17-85PA | Glenair Inc | RECP BND PLTFRM 85#23 PIN Al RoHS : Compliant |
| 0 | ||
| 801-009-07NC17-85SA | Glenair Inc | 0 | ||||
| 801-009-07ZN17-85BA | Glenair Inc | 0 | ||||
| 801-009-12NF17-85BC | Glenair Inc | RoHS : Compliant | 0 | |||
![]() PEI Genesis | 217-8516-010 | ITT Interconnect Solutions |
| 7,151 | ||
| 217-8516-001 | ITT Interconnect Solutions |
| 773 | |||
![]() Powell Electronics | 1217853-1 | TE Connectivity | Terminals RoHS : Compliant |
| 549,120 | |
| 2317857-2 | TE Connectivity | I/O Connectors RoHS : Compliant |
| 1,688 | ||
| 2178531-1 | TE Connectivity | TE COMPONENT (REF 2178531-1) RoHS : Compliant |
| 190 | ||
| 817851-SF | TE Connectivity | Connectors |
| 38 | ||
| 311785-000 | TE Connectivity | connector accessories |
| 17 | ||
| 801-010-07M17-85PB | Glenair Inc | CIRC MGHTY MSE (80/60) - CIRCULAR MIGHTY RoHS : Compliant |
| 7 | ||
| 2M801-007-16NF17-85PB | Amphenol Corporation | M801 85C 85#23 PIN PLUG OM RoHS : Not Compliant |
| 7 | ||
| 801-010-07M17-85PA | Glenair Inc | CIRC MGHTY MSE (80/60) - CIRCULAR MIGHTY RoHS : Compliant |
| 6 | ||
| 51785-2 | TE Connectivity | Connectors |
| 5 | ||
| 2M801-007-16NF17-85PA | Amphenol Corporation | M801 85C 85#23 PIN PLUG OM RoHS : Not Compliant |
| 3 | ||
| 2M801-008-16NF17-85SD | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 3 | ||
| 801-008-26M17-85SB | Glenair Inc | CIRC MGHTY MSE (80/60) - CIRCULAR MIGHTY RoHS : Compliant |
| 2 | ||
| 2217859-1 | TE Connectivity | Tools |
| 1 | ||
| 801-008-26M17-85PA | Glenair Inc | CIRC MGHTY MSE (80/60) - CIRCULAR MIGHTY RoHS : Compliant |
| 1 | ||
| 1-817854-4 | TE Connectivity | Tools RoHS : Compliant |
| 1 | ||
![]() Chip 1 Exchange | CXA1785ART4 | INSTOCK | 9,200 | |||
| LT1785AIS8#PBF | INSTOCK | 514 | ||||
| ROS17851+ | INSTOCK | 500 | ||||
| CVCO55BE-1785-1900 | Cirrus Logic | INSTOCK | 286 | |||
| CVCO55BE-1785-1900 | INSTOCK | 286 | ||||
| 1971785-1 | TE Connectivity | INSTOCK RoHS : Compliant | 200 | |||
| LT1785ACS8#PBF | INSTOCK | 111 | ||||
| 60178-511 00/QUANTE-SID-P | 3M | INSTOCK | 59 | |||
| LT1785AIS8-PBF | LTECH | INSTOCK | 46 | |||
![]() Avnet Abacus | 1785942 | Phoenix Contact | Terminal Block Socket 508 mm 2 Ways 12 A 320 V Through Hole Vertical (Alt: 1785942) RoHS : Compliant | 150 | ||
| 1785955 | Phoenix Contact | Terminal Block Socket 508 mm 3 Ways 12 A 320 V Through Hole Vertical (Alt: 1785955) RoHS : Compliant | 100 | |||
| 1785968 | Phoenix Contact | Terminal Block Socket 508 mm 4 Ways 12 A 320 V Through Hole Vertical (Alt: 1785968) RoHS : Compliant | 50 | |||
| 1785984 | Phoenix Contact | Terminal Block Socket 508 mm 6 Ways 12 A 320 V Through Hole Vertical (Alt: 1785984) RoHS : Compliant | 50 | |||
| 20817858 | nVent Schroff | Trapezoid Form Extractor Handle Polyphenylene Ether (Alt: 20817858) RoHS : Compliant | 2 | |||
| 1785638 | Phoenix Contact | GMSTBV 25 8G762 AU GMSTBV258G762AU (Alt: 1785638) RoHS : Compliant | 0 | |||
| 1785719 | Phoenix Contact | MSTBP 25 6ST508 GY 377093 MSTBP256ST508GY377093 (Alt: 1785719) RoHS : Compliant | 0 | |||
| 1785845 | Phoenix Contact | MSTB 25 2ST BU MSTB252STBU (Alt: 1785845) RoHS : Compliant | 0 | |||
| 1785971 | Phoenix Contact | ICV 25 5G508 ICV255G508 (Alt: 1785971) RoHS : Compliant | 0 | |||
| 1785980000 | Weidmüller Interface GmbH & Co. KG | Conn Terminal Block 8 POS 508mm Solder ST ThruHole 10A (Alt: 1785980000) RoHS : Compliant | 0 | |||
| 653L17852I2T | CTS Corporation | - Tape and Reel (Alt: 653L17852I2T) RoHS : Compliant | 0 | |||
| 653V17856C2T | CTS Corporation | - Tape and Reel (Alt: 653V17856C2T) RoHS : Compliant | 0 | |||
| 637L17852I2T | CTS Corporation | - Tape and Reel (Alt: 637L17852I2T) RoHS : Compliant | 0 | |||
| 653V17853I3T | CTS Corporation | - Tape and Reel (Alt: 653V17853I3T) RoHS : Compliant | 0 | |||
| 637L17855I2T | CTS Corporation | - Tape and Reel (Alt: 637L17855I2T) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 2-2071785-3 | TE Connectivity | ECK250BHDASA,05 (Alt: 2-2071785-3) RoHS : Compliant | 0 | ||
| 1971785-1 | TE Connectivity | Contact SKT Crimp ST Cable Mount (Alt: 1971785-1) RoHS : Compliant | 0 | |||
| 1971785-2 | TE Connectivity | (Alt: 1971785-2) RoHS : Compliant | 0 | |||
| 1SNA178529R0400 | TE Connectivity | (Alt: 1SNA178529R0400) RoHS : Compliant | 0 | |||
![]() Avnet Silica | LPC1785FBD208K![]() | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 120 MHz 256 KB (Alt: LPC1785FBD208K) RoHS : Compliant | 0 | ||
![]() Component Electronics, Inc | 178-511 | Spaenaur | IN STOCK SHIP TODAY | 1,000 | ||
LT1785CS8#PBF![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 443 | ||
LT1785IS8#PBF![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 26 | ||
| 1785955 | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant |
| 17 | ||
LT1785CS8![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 12 | ||
LT1785IN8![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| 10917856-1 | IN STOCK SHIP TODAY | 4 | ||||
| 150-1785-02 | Sun Microsystems Inc | IN STOCK SHIP TODAY | 1 | |||
SN65HVD1785P![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
![]() DB Roberts | SPL17857LH | Spiralock | 7/8-14SPL LH 4StFl GP B NiT |
| 2 | |
| SPL17857A | Spiralock | 7/8-14 SPL 4RS MP B TiN |
| 2 | ||
| 17W01785 | Essentra Components | FLAT WASHER, .110 ID, .170 OD, | 0 | |||
| 551785 | Essentra Components | Rivet Based Spacer 22 mm Spacer Natural | 0 | |||
| M6178-5008-A | RAF Electronic Hardware | 0 | ||||
| SPL17855A | Spiralock | 7/8-14 SPL3SP MP P TiN Standard New Taps | 0 | |||
| 461785 | Essentra Components | 0 | ||||
| M1178-5008-A | RAF Electronic Hardware | 0 | ||||
| 02910-11785 | Avdel | AVSEALII PLG 15.5MM ALST | 0 | |||
| AC-CAB1-7-1785-060 | Southco | 0 | ||||
| 17W01785B | Essentra Components | FLAT WASHER, .110 ID, .170 OD, | 0 | |||
| 1785-832-SS | RAF Electronic Hardware | 0 | ||||
| 31785 | Essentra Components | 0 | ||||
![]() EBV Elektronik | LPC1785FBD208K![]() | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 120 MHz 256 KB (Alt: LPC1785FBD208K) RoHS : Compliant | 0 | ||
| MIC2178-5.0YWM | Microchip Technology Inc | 25A 200KHZ SYNCHRONOUS SWITCHER (Alt: MIC2178-5.0YWM) RoHS : Compliant | 0 | |||
![]() Flip Electronics | LPC1785FBD208,551![]() | NXP Semiconductors | Stock RoHS : Compliant | 1,292 | ||
LPC1785FBD208![]() | NXP Semiconductors | Stock RoHS : Compliant | 186 | |||
![]() Master Electronics | 1785971 | Phoenix Contact | PCB headers - nominal current: 12 A - rated voltage (III/2): 320 V - nominal cross section: 2.5 mm² - number of positions: 5 - pitch: 5.08 mm - color: green - contact surface: Tin - mounting: Wave soldering - pin layout: Linear pinning - solder pin [P]: 3.5 mm RoHS : Compliant |
| 101 | |
| SFSD-10-28-G-17.85-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1785845 | Phoenix Contact | PLUG COMPONENT NOMINAL RoHS : Compliant |
| 0 | ||
| MKJ1A1T17-85PE | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| MKJ1A1W17-85SA | ITT Interconnect Solutions | Connector Miniature Circular PIN 12 Position Crimp Straight Cable Mount 12 Terminal 1 Port RoHS : Not Compliant |
| 0 | ||
| MKJ1A26C17-85PA | ITT Interconnect Solutions | Connector Miniature Circular PIN 85 Position Crimp Straight Cable Mount 85 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| MKJ1A2C17-85FA | ITT Interconnect Solutions | Connector Miniature Circular Socket 85 Position Solder Cup Straight Flange Mount 85 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| MKJ1A6C17-85PA | ITT Interconnect Solutions | Connector Circular Housing PIN 3 Position 5 Shell Size Olive Drab Cadmium Aluminum RoHS : Compliant |
| 0 | ||
| MKJ1A7F17-85PE | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| MKJ1B1T17-85EA | ITT Interconnect Solutions | Connector Miniature Circular PIN 85 Position Solder Cup Straight Cable Mount 85 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| MKJ1B1W17-85SF | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| MKJ1B26C17-85EA | ITT Interconnect Solutions | Connector Miniature Circular PIN 85 Position Solder Cup Straight Cable Mount 85 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| MKJ1B26F17-85PA | ITT Interconnect Solutions | Connector Miniature Circular PIN 85 Position Crimp Straight Cable Mount 85 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| MKJ1B2Z17-85PE | ITT Interconnect Solutions | Connector Miniature Circular Socket 85 Position Crimp Straight Flange Mount 85 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| MKJ1B6F17-85PAF0 | ITT Interconnect Solutions | Connector Circular Housing PIN 85 Position 17 Shell Size Electroless Nickel Plated Aluminum RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 3-101-785 | Schurter Electronic Components | DC Power Connectors GS21 Connector Outlet 400VDC 2.6kW RoHS : Compliant |
| 50 | |
| 1785029 | RS Pro | Multi Function 4PDT Timer Relay 12-240VAC/VDC Screw Terminal DIN Rail Mount |
| 15 | ||
| 1421785 | Phoenix Contact | Heavy Duty Power Connectors CUC-PPC-C2ZNI-SS/ 24FKP5 RoHS : Compliant |
| 2 | ||
| 881785-B21-AX | Axiom Manufacturing | 12TB 6GB/S SATA 7 2K RPM LFF 3 5IN ENTERPRISE HDD |
| 0 | ||
| 1785984 | Phoenix Contact | Pluggable Terminal Blocks 6 Pos 5.08mm pitch Thru Hole Invert Hdr RoHS : Compliant |
| 0 | ||
| 1641785 | Phoenix Contact | Circular Metric Connectors M12 SENSOR PLG 4P RoHS : Compliant |
| 0 | ||
| 1471785 | Phoenix Contact | Enclosures, Boxes, & Cases OCS PANEL 1008 PC |
| 0 | ||
| MAX17851EVKIT# | Analog Devices Inc | Interface Development Tools EVKIT for SPI to UART Command Processor |
| 0 | ||
![]() Pasternack Enterprises US | PE3W17857 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. NEX10 Male to NEX10 Female Bulkhead Low PIM Cable Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 female bulkhead low PIM cable using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female bulkhead low PIM cable using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17857 can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17857 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17857 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17857 can also be used in the other direction and will be NEX10 female bulkhead to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 745 | ||
| PE3W17854 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. NEX10 Male to NEX10 Male Low PIM Cable Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17854 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17854 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 plug cable assembly PE3W17854 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 390 | |||
| PE3W17856 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. NEX10 Male to NEX10 Female Low PIM Cable Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 female low PIM cable using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female low PIM cable using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17856 can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17856 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17856 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17856 can also be used in the other direction and will be NEX10 female to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 220 | |||
| PE3W17857-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. NEX10 Male to NEX10 Female Bulkhead Low PIM Cable 60 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 female bulkhead low PIM cable 60 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female bulkhead low PIM cable 60 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17857-60 can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17857-60 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17857-60 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17857-60 can also be used in the other direction and will be NEX10 female bulkhead to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 149 | ||
| PE3W17854-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. NEX10 Male to NEX10 Male Low PIM Cable 36 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 36 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 36 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17854-36 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17854-36 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 plug cable assembly PE3W17854-36 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 78 | ||
| PE517850 | Pasternack Enterprises | Key Specifications. Polarity Standard Connector Series SMA Connector Gender Female Impedance 50 Ohm Body Style Straight Attachment Method Solder Mount Method None Minimum Frequency DC Maximum Frequency 26.5 GHz Interface Type 1 End Launch. Super SMA Female Connector Solder Attachment 0.114 inch End Launch PCB, 0.020 inch Pin Diameter, Up to 26.5 GHz. Pasternack’s PE517850 Super SMA Female End Launch PCB Connector is part of our full line of RF components available for same-day shipping. Our SMA female connector operates up to a maximum frequency of 26.5 GHz and offers good VSWR of 1.3:1. Our SMA female connector PE517850 datasheet specifications and drawing with dimensions are shown below in this PDF. Pasternack’s broad catalog of RF, microwave and millimeter wave connectors allows designers to configure and customize their signal connections however they like. Whether the need is to provide an I/O for a board design, or simply create a custom cable assembly configuration, Pasternack has the right connector for the job. Pasternack can also expertly build your custom cable assemblies for you and ship same-day. |
| 6 | ||
| PE3W17855 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. NEX10 Male to NEX10 Male Right Angle Low PIM Cable Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 male right angle low PIM cable using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male right angle low PIM cable using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and right angle a NEX10 cable connection on the other. Our low PIM a NEX10 to right angle a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17855 can also be known as a low PIM NEX10 plug to right angle NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17855 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 plug cable assembly PE3W17855 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to right angle NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17855 can also be used in the other direction and will be right angle NEX10 male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 0 | |||
| PE3W17853-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. NEX10 Male Right Angle to NEX10 Male Right Angle Low PIM Cable 60 Inch Length Using TFT-5G-402 Coax., Radio frequency assembly NEX10 male right angle to NEX10 male right angle low PIM cable 60 inch length using TFT-5G-402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male right angle to NEX10 male right angle low PIM cable 60 inch length using TFT-5G-402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with right angle a NEX10 cable connection on one end and right angle a NEX10 cable connection on the other. Our low PIM right angle a NEX10 to right angle a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17853-60 can also be known as a low PIM right angle NEX10 plug to right angle NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17853-60 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. NEX10 plug to NEX10 plug cable assembly PE3W17853-60 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with right angle NEX10 to right angle NEX10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 right angle plug to NEX10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W17851 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. NEX10 Male to NEX10 Male Low PIM Cable Using TFT-5G-402 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable using TFT-5G-402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable using TFT-5G-402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17851 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17851 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. NEX10 plug to NEX10 plug cable assembly PE3W17851 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 0 | |||
| PE3W17850/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. TNC Male to TNC Female Cable Using LMR-240-UF Coax with HeatShrink. PE3W17850/HS is a TNC male to TNC female cable using LMR-240-UF coax. This Pasternack TNC male to TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17850/HS TNC male to TNC female cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W01785 | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG6-CATV, RF Cable Type: RG6-CATV, RF Cable Impedance: 75 Ohm. 75 Ohm F Male Right Angle to 75 Ohm F Male Right Angle Cable Using 75 Ohm RG6-CATV Coax. PE3W01785 is a F male right angle to F male right angle cable using RG6-CATV coax. This Pasternack F male right angle to F male right angle cable assembly uses a 75 Ohm F for connector 1 and a 75 Ohm F for connector 2. F right angle to F right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male F right angle to male F right angle cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W01785 F male right angle to F male right angle cable assembly is constructed with RG6-CATV coax. | 0 | |||
| PE3W17853-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. NEX10 Male Right Angle to NEX10 Male Right Angle Low PIM Cable 198.1 CM Length Using TFT-5G-402 Coax., Radio frequency assembly NEX10 male right angle to NEX10 male right angle low PIM cable 198.1 cm length using TFT-5G-402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male right angle to NEX10 male right angle low PIM cable 198.1 cm length using TFT-5G-402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with right angle a NEX10 cable connection on one end and right angle a NEX10 cable connection on the other. Our low PIM right angle a NEX10 to right angle a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17853-200CM can also be known as a low PIM right angle NEX10 plug to right angle NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17853-200CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. NEX10 plug to NEX10 plug cable assembly PE3W17853-200CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with right angle NEX10 to right angle NEX10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 right angle plug to NEX10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3FCA178-5M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Dual SC APC to ST UPC, SM OS2, 2.0mm Riser, Yellow-5M. Pasternack’s PE3FCA178-5M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long patch cable assembly is equipped with duplex SC/APC to ST/UPC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA178-5M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/APC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W21785 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMPS, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm. SMPS Female to MMCX Plug Cable Using PE-SR047AL Coax. PE3W21785 is a SMPS female to MMCX plug cable using PE-SR047AL coax. This Pasternack SMPS female to MMCX plug cable assembly uses a 50 Ohm SMPS for connector 1 and a 50 Ohm MMCX for connector 2. Our female SMPS to plug MMCX cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W21785 SMPS female to MMCX plug cable assembly is constructed with PE-SR047AL coax. | 0 | |||
| PE3C1785 | Pasternack Enterprises | 0 | ||||
![]() Venkel Ltd. | HVCR2512-1W-1785FT | VENKEL LTD | High Voltage CR;2512;1W;17.8M;�1% RoHS : Compliant | 0 | ||
| CR2512-1W-1785FT | VENKEL LTD | Chip Resistor;2512;1W;17.8M;�1% RoHS : Compliant | 0 | |||
| CR0805-10W-1785FT | VENKEL LTD | Chip Resistor;0805;1/10W;17.8M;�1% RoHS : Compliant | 0 | |||
| PWCR1206-UK-1785DT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;17.8M;�0.5% RoHS : Compliant | 0 | |||
| CR0402-16W-1785FT | VENKEL LTD | Chip Resistor;0402;1/16W;17.8M;�1% RoHS : Compliant | 0 | |||
| PWCR2010-WK-1785FT | VENKEL LTD | Pulse Withstanding CR;2010;3/4W;�100PPM;17.8M;�1% RoHS : Compliant | 0 | |||
| CR0603-16W-1785FT | VENKEL LTD | Chip Resistor;0603;1/16W;17.8M;�1% RoHS : Compliant | 0 | |||
| CR2010-2W-1785FT | VENKEL LTD | Chip Resistor;2010;1/2W;17.8M;�1% RoHS : Compliant | 0 | |||
| PWCR0805-RK-1785FT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�100PPM;17.8M;�1% RoHS : Compliant | 0 | |||
| PWCR2512-ZK-1785DT | VENKEL LTD | Pulse Withstanding CR;2512;1.5W;�100PPM;17.8M;�0.5% RoHS : Compliant | 0 | |||
| PWCR2010-WK-1785DT | VENKEL LTD | Pulse Withstanding CR;2010;3/4W;�100PPM;17.8M;�0.5% RoHS : Compliant | 0 | |||
| CR0805-8W-1785FT | VENKEL LTD | Chip Resistor;0805;1/8W;17.8M;�1% RoHS : Compliant | 0 | |||
| PWCR2512-ZK-1785FT | VENKEL LTD | Pulse Withstanding CR;2512;1.5W;�100PPM;17.8M;�1% RoHS : Compliant | 0 | |||
| PWCR1210-VK-1785DT | VENKEL LTD | Pulse Withstanding CR;1210;1/2W;�100PPM;17.8M;�0.5% RoHS : Compliant | 0 | |||
| CR1210-4W-1785FT | VENKEL LTD | Chip Resistor;1210;1/4W;17.8M;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | LT1785ACN8#PBF | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDIP8 RoHS : Compliant | 12,230 | ||
| LT1785ACS8#TR | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Not Compliant | 12,056 | |||
| LT1785ACS8-TRPBF | Analog Devices Inc | 11,936 | ||||
| LT1785AHN8#PBF | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDIP8 RoHS : Compliant | 11,847 | |||
LPC1785FBD208K![]() | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M3 CPU, 120MHz, CMOS, PQFP208 RoHS : Compliant | 11,666 | |||
| LT1785ACN8-PBF | Analog Devices Inc | 11,392 | ||||
LPC1785FBD208,551![]() | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M3 CPU, 120MHz, CMOS, PQFP208 RoHS : Compliant | 9,686 | |||
| LT1785ACN8 | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDIP8 RoHS : Not Compliant | 9,338 | |||
| LT1785ACN8#TR | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDIP8 RoHS : Not Compliant | 9,230 | |||
| LT1785AHN8 | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDIP8 RoHS : Not Compliant | 9,202 | |||
| LT1785ACS8 | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Not Compliant | 7,367 | |||
| LT1785ACS8#TRPBF | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Compliant | 7,138 | |||
| LT1785ACN8#TRPBF | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDIP8 RoHS : Compliant | 5,891 | |||
| LT1785ACS8#PBF | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Compliant | 5,437 | |||
| LT1785ACS8-PBF | Analog Devices Inc | 5,278 | ||||
![]() Win Source Electronics | LT1785AIS8![]() | Linear Technology | 60V Fault Protected RS485/RS422 Transceivers RoHS : Not Compliant |
| 15,508 | |
LT1785AIS8#TRPBF![]() | Linear Technology | IC TXRX RS485/RS422 60V 8-SOIC RoHS : Compliant |
| 14,710 | ||
LT1785IS8![]() | Linear Technology | 60V Fault Protected RS485/RS422 Transceivers RoHS : Not Compliant |
| 14,562 | ||
LT1785AIS8#PBF![]() | Linear Technology | IC TXRX RS485/RS422 60V 8-SOIC RoHS : Compliant |
| 14,050 | ||
SN65HVD1785D![]() | Texas Instruments | IC TRANSCEIVER HALF 1/1 8SOIC / 1/1 Transceiver Half RS422, RS485 8-SOIC RoHS : Compliant |
| 10,000 | ||
SN65HVD1785DRG4![]() | Texas Instruments | 70-V Fault-Protected RS-485 Transceivers RoHS : Compliant |
| 9,490 | ||
SN65HVD1785DR![]() | Texas Instruments | IC FAULT-PROT RS485 TXRX 8-SOIC RoHS : Compliant |
| 9,120 | ||
LT1785CS8![]() | Linear Technology | 60V Fault Protected RS485/RS422 Transceivers RoHS : Not Compliant |
| 5,000 | ||
LT1785CS8#PBF![]() | Linear Technology | IC TXRX RS485/RS422 60V 8-SOIC RoHS : Compliant |
| 4,740 | ||
LT1785CS8#TRPBF![]() | Linear Technology | IC TXRX RS485/RS422 60V 8-SOIC RoHS : Compliant |
| 4,710 | ||
LT1785IS8#TRPBF![]() | Linear Technology | IC TXRX RS485/RS422 60V 8-SOIC RoHS : Compliant |
| 4,670 | ||
LT1785IS8#PBF![]() | Linear Technology | IC TXRX RS485/RS422 60V 8-SOIC RoHS : Compliant |
| 4,280 | ||
LT1785ACS8![]() | Linear Technology | 60V Fault Protected RS485/RS422 Transceivers RoHS : Not Compliant |
| 533 | ||
LT1785ACS8#TRPBF![]() | Linear Technology | IC TXRX 60V RS485/RS422 8SOIC RoHS : Compliant |
| 490 | ||
LT1785ACS8#PBF![]() | Linear Technology | IC TXRX 60V RS485/RS422 8SOIC RoHS : Compliant |
| 60 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |