| Electronic Components Datasheet Search |
|
16WA3-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() STMicroelectronics | M24C16-WMN6TP![]() | STMicroelectronics | 16 Kbit serial I2C bus EEPROM RoHS : Compliant |
| 7,322 | |
STM1061N16WX6F![]() | STMicroelectronics | Low Power Voltage Detector RoHS : Compliant |
| 4,309 | ||
M24C16-WDW6TP![]() | STMicroelectronics | 16 Kbit serial I2C bus EEPROM RoHS : Compliant |
| 21 | ||
![]() Microchip Technology Inc | EV16W43A | Microchip Technology Inc | PIC32CZ CA90 Curiosity Ultra Development Board, Projected EOL: |
| 258 | |
| 24AA16/W15K | Microchip Technology Inc | 16K, 2K X 8 1.8V SERIAL EE WAFER, WAFER, Projected EOL: 2036-01-01 - Contact for Pricing RoHS : Compliant | 0 | |||
| MCP73113-16WI/MF | Microchip Technology Inc | Single cell 6.5 OVP battery Charger, DFN, Projected EOL: 2036-09-03 - Contact for Pricing RoHS : Compliant | 0 | |||
| ATSAMHA1G16W-XPRO | Microchip Technology Inc | SAM HA1G16W XPRO EVAL KIT, Projected EOL: - Contact for Pricing | 0 | |||
| MCP73113T-16WI/MF | Microchip Technology Inc | Single cell 6.5 OVP battery Charger, DFN, Projected EOL: 2036-01-19 RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | S5P216W119G1 | IAUTOMATION | AVAILABLE EU | 6 | ||
![]() Braemac Americas-Symmetry | RS916WS00AC1A3R | Silicon Laboratories Inc | Multiprotocol Modules 802.11 b/g/n (2.4 GHz),802.11j, and dual-mode Bluetooth 5.4 |
| 1 | |
| IC-WESO16W | iC-Haus | 3-Channel 75 Ohm Line Driver |
| 1 | ||
| RS9116W-SB00-QMS-B2A | Silicon Laboratories Inc | RS9116 Wi-Fi NCP SoCs |
| 0 | ||
| RS9116W-SB00-B00-B2A | Silicon Laboratories Inc | RS9116 Single Band Wi-Fi NCP Module RoHS : Compliant |
| 0 | ||
| MAX1016.W.001 | Taoglas Antenna Solutions | 16-in-1 Permanent Mount Antenna White with Multiband GNSS, 8 5G/4G, 6 Wi-Fi & 1 LMR Whip with Staggered Cable Pigtails. |
| 0 | ||
![]() Component Electronics, Inc | CR0402-16W-82R5FT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant |
| 9,880 | |
| CR0402-16W-433JT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant |
| 9,800 | ||
| RMC1/16W-51R-5% | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 8,180 | ||
| CR0402-16W-243JT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant |
| 8,000 | ||
| CR0603-16W-1693FT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant |
| 5,000 | ||
| RMC1/16W-71.5K-1% | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 5,000 | ||
| CR0603-16W-4752FT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,960 | ||
| CR0603-16W-681JT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant | 4,500 | |||
| CR0402-16W-22R1FT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,000 | ||
| CR0402-16W-4021FT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,300 | ||
| CR0603-16W-104JT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant |
| 550 | ||
| CR0603-16W-2R49FT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant |
| 300 | ||
| CR0603-16W-1005FT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant |
| 150 | ||
| CR0402-16W-3320FT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant |
| 150 | ||
| CR0603-16W-200JT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant |
| 100 | ||
![]() Master Electronics | CTC-16-WAY-RECEPT-BLACK | ITT Interconnect Solutions | CTC 16 WAY RECEPT BLACK RoHS : Compliant |
| 700 | |
| H16WD6090G-10 | Crydom Inc | Solid State Relay - 4-32 VDC Control Voltage Range - 90 A Maximum Load Current - 48-690 VAC Operating Voltage Range - Instantaneous Turn-On - 1600 Vpk Transient Overvoltage - Input Status LED - Screw Termination - Panel Mount. RoHS : Compliant |
| 20 | ||
| H16WD6090GH | Crydom Inc | Solid State Relay - 4-32 VDC Control Voltage Range - 90 A Maximum Load Current - 48-690 VAC Operating Voltage Range - Zero Voltage Turn-On - 1600 Vpk Transient Overvoltage - Thermal Pad - Input Status LED - Screw Termination - Panel Mount. RoHS : Compliant |
| 5 | ||
| E32T16WR | OMRON Industrial Automation | Photoelectric Sensor Thru-beam 1.7m RoHS : Compliant |
| 1 | ||
| E2BM18LN16WPC25M | OMRON Industrial Automation | Double M18 Long PW 5M NPN NC RoHS : Compliant |
| 0 | ||
| 541816-WH005 | Alpha Wire | White - 30.48m (100ft)/Spool RoHS : Compliant |
| 0 | ||
7201J16WGE11![]() | C&K Switches | Rocker Switch - DP On-None-On - 5A@120VAC/2A@250VAC - White Rocker w/Frame - Snap-in - Wire Wrap - Epoxy Seal RoHS : Compliant |
| 0 | ||
| YMC8016-W-13-04SN0 | TE Connectivity | The YMC8016-W-13-04SN0 is an MC801 series fiber optic plug connector with a cadmium-plated aluminum shell designed for 4 fibers. MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| FHV7XM016S16W | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| F221V3/16-WH002 | Alpha Wire | FIT221V3/16 WHITE 500 FT RoHS : Compliant |
| 0 | ||
| F2211/16-WHITE-1000 | Alpha Wire | FIT2211/16 WHITE 1000 FT RoHS : Compliant |
| 0 | ||
| 6716-WHITE-1000 | Alpha Wire | The 6716-WHITE-1000 is a 16 AWG single-conductor hook-up wire featuring halogen-free modified Polyphenylene Ether (mPPE) insulation. RoHS : Compliant |
| 0 | ||
| E2AM18LN16WPB15M | OMRON Industrial Automation | M18LNG UNSH NPB 16MM PNP NO 5M RoHS : Compliant |
| 0 | ||
| E2AM18LN16WPD22M | OMRON Industrial Automation | M12Uns NPB 8mm DC2W NO 2M Cbl RoHS : Compliant |
| 0 | ||
| HE16WPR/06 | Altech Corporation | Altech HE16WPR/06 Panel Mount Feed-Through Flat Base Pole Spacing 15mm 6 Poles 5.6 Dia RoHS : Compliant |
| 0 | ||
![]() Neutron USA | RK616WALM | StarTech | 6U WALL MOUNT RACK WALL MOUNT SVR AND NETWORK CABINET 6U |
| 133 | |
| TEP 150-2416WI | Traco Power | DC/DC Converters - Through Hole 150W DC/DC Converter isolated, regulated in a Chassis Mount Metal Case |
| 50 | ||
| IHTAA-16W | International Power | Linear Power Supplies TRIPLE OUT PWR SPLY |
| 50 | ||
| ATS-HP-F6L300S16W-344 | Advanced Thermal Solutions Inc | Heat Sinks Heat Pipe, Copper, High Performance, Flat, 300x6.97x5mm |
| 50 | ||
| HE16WPR/10 | Altech Corporation | Barrier Terminal Blocks Eurostrip,10 pole,15mm spacing |
| 25 | ||
| 616W-3-LCD | Dwyer Instruments Inc | Differential pressure transmitter;0-10" w.c., max 10 psig;4-20 mA out;10-35 VD |
| 3 | ||
| 616W-2M-LCD | Dwyer Instruments Inc | Differential pressure transmitter;0-1.5 kPa, max 68.9 kpa;4-20 mA out;10-35 VDC |
| 2 | ||
| HTAA-16W-AG | Bel Power Solutions | Linear Power Supplies 5/+12/-12V, 2/.4/.4A -5V 0.4A RoHS : Compliant |
| 0 | ||
| TEP 160-7216WIR | Traco Power | Isolated DC/DC Converters |
| 0 | ||
| TEP 100-2416WIR | Traco Power | Isolated DC/DC Converters |
| 0 | ||
| H16WD6025G | Crydom Inc | Solid State Relay, Panel Mt, load: 48-690VAC 25A, Control: 4-32VDC, w/LED, ZC |
| 0 | ||
| 94HAB16WRT | Grayhill Inc | Switch; Rotary DIP; 16 Position; Flush ActW/Arrow; 100mA; 50VDC; Gold; Gull Wing RoHS : Compliant |
| 0 | ||
| H16WD6050 | Crydom Inc | Solid State Relay, Panel Mt, Load: 48-690VAC 50A, Control: 4-32 VDC, ZC, Screw Terminal |
| 0 | ||
| TEP 200-2416WIRCMF | Traco Power | Isolated DC/DC Converters |
| 0 | ||
| KC0WCM-P16WBC0-0000 | ODU Steckverbindungssysteme Gmbh & Co Kg | Circular Metric Connectors In-line RECPT w/ screw-lock, Size 0, IP6K8 / IP6K9K, 16 C, C (blue) Key |
| 0 | ||
![]() Pasternack Enterprises US | PE3C0616/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 SMA Male (Plug) to TNC Male (Plug) Low Loss Cable 24 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to TNC male (plug) low loss cable 24 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0616/WP-24 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0616/WP-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3C0616/WP-24 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0616/WP-24 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | |
| PE3C0616/WP-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 SMA Male (Plug) to TNC Male (Plug) Low Loss Cable 36 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to TNC male (plug) low loss cable 36 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0616/WP-36 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0616/WP-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3C0616/WP-36 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0616/WP-36 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0616/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to TNC Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to TNC male (plug) low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0616/WP-48 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0616/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3C0616/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0616/WP-48 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C8816/WH-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/WH-12, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/WH-12 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-WH coax. |
| 0 | ||
| PE3C0616/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 SMA Male (Plug) to TNC Male (Plug) Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to TNC male (plug) low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0616/WP-60 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0616/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3C0616/WP-60 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0616/WP-60 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0616/WP | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 SMA Male (Plug) to TNC Male (Plug) Low Loss Cable Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to TNC male (plug) low loss cable using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0616/WP can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0616/WP RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3C0616/WP is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0616/WP can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3C8816/WH | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/WH, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/WH is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-WH coax. | 0 | |||
| PE3C8816/WH-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/WH-120, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/WH-120 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-WH coax. |
| 0 | ||
| PE3C8816/WH-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/WH-300, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/WH-300 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-WH coax. |
| 0 | ||
| PE3C8816/WH-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/WH-36, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/WH-36 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-WH coax. |
| 0 | ||
| PE3C8816/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/WH-72, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/WH-72 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax. |
| 0 | ||
![]() Venkel Ltd. | TFCR0402-16W-C-1012CT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;10.1K;�0.25% RoHS : Compliant | 0 | ||
| TFCR0402-16W-C-1020DT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;102R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-1021FT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;1.02K;�1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-1042CT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;10.4K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-1050DT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;105R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-1053DT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;105K ;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-10R1CT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;10.1R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-10R1DT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;10.1R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-10R9FT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;10.9R;�1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-1102FT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;11K;�1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-1112FT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;11.1K;�1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-1131CT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;1.13K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-1131DT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;1.13K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-11R3FT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;11.3R;�1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-1212DT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;12.1K;�0.5% RoHS : Compliant | 0 | |||
![]() Vyrian | SNC5416W | Texas Instruments | Inverter, 6-Func, 1-Input, TTL, CDFP14 RoHS : Not Compliant | 9,731 | ||
| XLS416WD0800-21 | Broadcom Limited | 9,450 | ||||
TL3116-W![]() | Texas Instruments | Comparator | 9,317 | |||
STM1061N16WX6F![]() | STMicroelectronics | RoHS : Compliant | 9,269 | |||
| SNC54116W | Texas Instruments | D Latch, 2-Func, 4-Bit, TTL, CDFP24 RoHS : Not Compliant | 8,625 | |||
| XLS416WD800 | Broadcom Limited | 7,793 | ||||
| XLS416WD0800 | Broadcom Limited | 6,195 | ||||
XC7272A-16WC68I![]() | AMD Xilinx | UV PLD, 25ns, 72-Cell, CMOS, CQCC68 RoHS : Not Compliant | 3,628 | |||
| XC7272A-16WC84I | AMD Xilinx | UV PLD, 25ns, 72-Cell, CMOS, CQCC84 RoHS : Not Compliant | 3,604 | |||
| XLS416WD1200-21 | Broadcom Limited | 3,476 | ||||
| XLS416WD1000 | Broadcom Limited | 3,396 | ||||
XC7272A-16WC68C![]() | AMD Xilinx | UV PLD, 25ns, 72-Cell, CMOS, CQCC68 RoHS : Not Compliant | 3,097 | |||
XC7236A-16WC44I![]() | AMD Xilinx | UV PLD, 25ns, 36-Cell, CMOS, CQCC44 RoHS : Not Compliant | 2,787 | |||
XC7236A-16WC44C![]() | AMD Xilinx | UV PLD, 25ns, 36-Cell, CMOS, CQCC44 RoHS : Not Compliant | 2,296 | |||
| XC7272A-16WC84C | AMD Xilinx | UV PLD, 25ns, 72-Cell, CMOS, CQCC84 RoHS : Not Compliant | 1,877 | |||
![]() Win Source Electronics | BAS16W | Yangzhou Yangjie Electronics Co Ltd | DIODE GEN PURP 75V 200MA SOD123 / Diode 75 V 200mA Surface Mount SOD-123 RoHS : Compliant |
| 690,000 | |
BAS16WT1G![]() | onsemi | DIODE GEN PURP 100V 200MA SC70-3 RoHS : Compliant |
| 246,000 | ||
| BAV116W-7-F | Diodes Incorporated | DIODE GEN PURP 130V 215MA SOD123 / Rectifier Diode Small Signal Switching 130V 0.215A 3000ns 2-Pin SOD-123 T/R RoHS : Compliant |
| 224,000 | ||
1210L150/16WR![]() | Littelfuse Inc | PTC RESET FUSE 16V 1.5A 1210 RoHS : Compliant |
| 148,680 | ||
BAS16W,115![]() | Nexperia | DIODE GEN PURP 100V 175MA SOT323 / Diode Standard 100 V 175mA (DC) Surface Mount SOT-323 RoHS : Compliant |
| 120,000 | ||
| BAS16WX-TP | Micro Commercial Components | DIODE GEN PURP 75V 100MA SOD323 RoHS : Compliant |
| 65,850 | ||
BC807-16W,135![]() | Nexperia | TRANS PNP 45V 0.5A SOT323 RoHS : Compliant |
| 64,530 | ||
CAT24C16WI-GT3![]() | onsemi | EEPROM Serial-2Wire 16K-bit 2K x 8 1.8V/2.5V/3.3V/5V Automotive 8-Pin SOIC N T/R / IC EEPROM 16KBIT 400KHZ 8SOIC RoHS : Compliant |
| 60,000 | ||
| BAS16W-7-F | Diodes Incorporated | DIODE GEN PURP 75V 150MA SOT323 RoHS : Compliant |
| 51,000 | ||
| BC817-16W T106 | ROHM Semiconductor |
| 40,950 | |||
| 1206L016WR | Littelfuse Inc | PTC RESET 30V .160A SMD 1206 RoHS : Compliant |
| 36,000 | ||
1206L110/16WR![]() | Littelfuse Inc | Polymeric PTC Resettable Fuse 16V 1.1 A Ih Surface Mount 1206 (3216 Metric), Concave RoHS : Compliant |
| 30,000 | ||
1206L075/16WR![]() | Littelfuse Inc | PTC 16V POLYFUSE SMT 1206 0.75A RoHS : Compliant |
| 21,450 | ||
| BAS16WS-HE3-08 | Vishay Huntington | DIODE GEN PURP 75V 250MA SOD323 / Diode Standard 75 V 250mA Surface Mount SOD-323 |
| 3,000 | ||
| MT40A1G16WBU-083E:B | Micron Technology Inc | IC DRAM 16G PARALLEL 1.2GHZ RoHS : Compliant |
| 2,467 | ||
![]() Wuhan P&S | U77A16WH2081 | TE Connectivity | - |
| 6,000 | |
CAT24C16WE-GT3![]() | onsemi | 16K Microwire Compatible Serial EEPROM RoHS : Compliant |
| 3,400 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |