Electronic Components Datasheet Search
  English  ▼
ALLDATASHEET.COM

X  



15AVB2-R1 Distributor

DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

GLYN GmbH & Co. KG
MSB15A6N W-SAMPLE

Minebea Co Ltd Self-powered Synchronous Rectifying Active Bridge
6
MSB15A6L W-SAMPLE

Minebea Co Ltd Self-powered Synchronous Rectifying Active Bridge
6

Pasternack Enterprises US
PE15A1005

Pasternack Enterprises Key Specifications, Gain: 40 dB, Power Output: 15 dBm P1dB, Frequency, Min: 1.2 GHz, Frequency, Max: 1.4 GHz, Noise Figure, Max: 1.5 dB, Design: High Gain, Voltage, DC Max: 13.2 Volts, Current, DC Max: 250 mA, Connector Series: SMA. 40 dB Gain, 1.5 dB NF, 15 dBm P1dB, 1.2 GHz to 1.4 GHz, Low Noise High Gain Amplifier SMA. PE15A1005 high gain amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized high gain amplifier uses SMA connectors at 50 Ohm. This SMA high gain amplifier has a minimum frequency of 1.2 GHz and maximum frequency of 1.4 GHz. The significantly low noise figure of this radio frequency amplifier is 1.5 dB. High gain LNA amplifier PE15A1005 is rated at 13.2 Volts DC maximum and 250 mA. Our high gain radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave high gain amplifier can ship worldwide the same day of the purchase as with our other available RF parts.
1 : $1,040.0
5 : $998.4
10 : $956.8
30
PE15A4053F

Pasternack Enterprises Key Specifications, Frequency, Min: 500 MHz, Frequency, Max: 4 GHz, Gain, Min: 30 dB, 1dB Compression Point, Min: 30 dBm, Voltage, DC Typ: 12 Volts. 1 Watt P1dB, 500 MHz to 4 GHz, Medium Power Amplifier with Heatsink, SMA, 30 dB Gain, 6 dB NF. RF solid state power amplifier (SSPA) PE15A4053F from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a medium power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 1 Watt. Pasternack solid state power amplifier part number PE15A4053F SMA medium power amp has a 30 dB minimum gain. The medium power medium gain amp is rated with a P1dB of 30 dBm. Our radio frequency medium power solid state amplifier is constructed for minimum frequency of 500 MHz and a maximum frequency of 4 GHz. Additional radio frequency specs on this high frequency medium gain medium power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our medium power medium gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This medium power 1 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs.
1 : $8,060.0
5 : $7,737.6
10 : $7,415.2
25 : $7,092.8
7
PE15A5005

Pasternack Enterprises Key Specifications, Frequency, Min: 1.5 GHz, Frequency, Max: 3.5 GHz, Gain, Typical: 19.5 dB, 3rd Intercept Point, Typ: 45 dB. 8 Watt Psat, 1.5 GHz to 3.5 GHz, High Power GaAs Amplifier, SMA Input, SMA Output, 19.5 dB Gain, 45 dBm IP3, 10 dB NF. RF solid state power amplifier (SSPA) PE15A5005 from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a high power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 8 Watts. Pasternack solid state power amplifier part number PE15A5005 SMA high power amp has a 19.5 dB typical gain. The high power medium gain amp is rated with a Psat of 39 dBm. Our radio frequency high power solid state amplifier is constructed for minimum frequency of 1.5 GHz and a maximum frequency of 3.5 GHz. Additional radio frequency specs on this high frequency medium gain high power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our high power medium gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This high power 8 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs.
1 : $2,970.0
5 : $2,851.2
10 : $2,732.4
6
PE15A5106F

Pasternack Enterprises
1 : $7,120.0
5 : $6,835.2
10 : $6,550.4
25 : $6,265.6
3
PE15A1027

Pasternack Enterprises Key Specifications, Gain: 18 dB, Power Output: 13 dBm Psat, Frequency, Min: 8 GHz, Frequency, Max: 12 GHz, Design: Low Noise, Voltage, DC Max: 13 Volts, Current, DC Max: 150 mA, Connector Series: SMA. 2.2 dB NF, 13 dBm Psat, 8 GHz to 12 GHz, Low Noise Amplifier, 18 dB Gain, SMA. PE15A1027 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 8 GHz and maximum frequency of 12 GHz. LNA amplifier PE15A1027 is rated at 13 Volts DC maximum and 150 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.
1 : $2,740.0
5 : $2,630.4
10 : $2,520.8
2
PE15A4012

Pasternack Enterprises Key Specifications, Frequency, Min: 3.5 GHz, Frequency, Max: 7 GHz, Gain, Typical: 26 dB, 3rd Intercept Point, Typ: 45 dB, Voltage, DC Typ: 8 Volts, Current, DC Typ: 1,750 mA. 5 Watt Psat, 3.5 GHz to 7 GHz, High Power GaAs Amplifier, SMA Input, SMA Output, 26 dB Gain, 45 dBm IP3, 11 dB NF. RF solid state power amplifier (SSPA) PE15A4012 from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a high power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 5 Watts. Pasternack solid state power amplifier part number PE15A4012 SMA high power amp has a 26 dB typical gain. The high power medium gain amp is rated with a Psat of 37 dBm. Our radio frequency high power solid state amplifier is constructed for minimum frequency of 3.5 GHz and a maximum frequency of 7 GHz. Additional radio frequency specs on this high frequency medium gain high power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our high power medium gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This high power 5 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs.
1 : $5,330.0
5 : $5,116.8
10 : $4,903.6
1
PE15A4011

Pasternack Enterprises Key Specifications, Frequency, Min: 2 GHz, Frequency, Max: 4.4 GHz, Gain, Min: 26 dB, Gain, Typical: 32 dB, 3rd Intercept Point, Typ: 37 dB, 3rd Intercept Point, Min: 35 dB, Voltage, DC Typ: 8 Volts, Current, DC Typ: 150 mA. 5 Watt Psat, 2 GHz to 4.4 GHz, High Power GaAs Amplifier, SMA Input, SMA Output, 32 dB Gain, 37 dBm IP3, 10 dB NF. RF solid state power amplifier (SSPA) PE15A4011 from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a high power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 5 Watts. Pasternack solid state power amplifier part number PE15A4011 SMA high power amp has a 26 dB minimum gain and 32 dB typical gain. The high power medium gain amp is rated with a Psat of 37 dBm. Our radio frequency high power solid state amplifier is constructed for minimum frequency of 2 GHz and a maximum frequency of 4.4 GHz. Additional radio frequency specs on this high frequency medium gain high power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our high power medium gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This high power 5 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs.
1 : $3,280.0
5 : $3,214.4
10 : $3,148.8
1
PE15A1072

Pasternack Enterprises Key Specifications, Gain: 25 dB, Power Output: 13 dBm Psat, Frequency, Min: 6 GHz, Frequency, Max: 12 GHz, Noise Figure, Max: 2.5 dB, Design: Low Noise, Voltage, DC Max: 5.5 Volts, Current, DC Max: 75 mA, Connector Series: SMA. 2.1 dB NF Low Noise Amplifier, Operating from 6 GHz to 12 GHz with 25 dB Gain, 13 dBm Psat and SMA. PE15A1072 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 6 GHz and maximum frequency of 12 GHz. The significantly low noise figure of this radio frequency amplifier is 2.5 dB with a typical gain of 25 dB. LNA amplifier PE15A1072 is rated at 5.5 Volts DC maximum and 75 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.
1 : $2,660.0
5 : $2,553.6
10 : $2,447.2
1
PE15A1051

Pasternack Enterprises Key Specifications, Gain: 30 dB, Power Output: 18 dBm P1dB, Frequency, Min: 20 MHz, Frequency, Max: 1 GHz, Noise Figure, Max: 1.7 dB, Design: Low Noise, Voltage, DC Max: 18 Volts, Current, DC Max: 160 mA, Connector Series: SMA. 1.3 dB NF Low Noise Amplifier, Operating from 20 MHz to 1 GHz with 30 dB Gain, 18 dBm P1dB and SMA. PE15A1051 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 20 MHz and maximum frequency of 1 GHz. The significantly low noise figure of this radio frequency amplifier is 1.7 dB with a typical gain of 30 dB. LNA amplifier PE15A1051 is rated at 18 Volts DC maximum and 160 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.
1 : $845.99
0
PE15A1088

Pasternack Enterprises Key Specifications, Gain: 37 dB, Power Output: 15 dBm P1dB, Frequency, Min: 10 MHz, Frequency, Max: 10 GHz, Noise Figure, Max: 4 dB, Design: Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 250 mA, Connector Series: SMA. 3.2 dB NF Low Noise Amplifier, Operating from 10 MHz to 10 GHz with 37 dB Gain, 15 dBm P1dB and SMA. The PE15A1088 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This DC powered low noise amplifier has a female gender configuration for input and output ports. This SMA low noise amplifier has a minimum frequency of 10 MHz and maximum frequency of 10 GHz. The PE15A1088 low noise amplifier has 1.4:1 of typical VSWR (Voltage Standing Wave Ratio). This radio frequency amplifier has impressive typical performance that includes a very low noise figure of 3.2 dB, small signal gain of 37 dB, and gain flatness of 3 dB. Our 007 ADCC powered low noise amplifier is designed to operate on a 9/15 VDC voltage. The PE15A1088 007 low noise amplifier operates over the temperature range of -40 deg C and 85 deg C. This low noise amplifier has 15 dB of typical 1dB compression power and a maximum RF input power of 0 dBm. The Pasternack low noise amplifier features 200 mA typical DC current. Additional specs for this low noise amplifier can be found on its PDF specification datasheet and CAD drawings above. Our DC powered low noise radio frequency amplifier is part of over 40,000 RF, microwave, and millimeter wave components available from Pasternack. This coaxial low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect 007 DC powered low noise amplifier for your requirement.
1 : $2,260.0
5 : $2,169.6
10 : $2,079.2
25 : $1,988.8
0
PE15A63006

Pasternack Enterprises Key Specifications, Gain: 30 dB, Power Output: 10 dBm P1dB, Frequency, Min: 1 GHz, Frequency, Max: 1.4 GHz, Noise Figure, Max: 1.4 dB, Design: Input Protected Low Noise, Connector Series: SMA. 1.2 dB NF Input Protected Low Noise Amplifier, Operating from 1 GHz to 1.4 GHz with 30 dB Gain, 10 dBm P1dB and SMA. PE15A63006 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 1 GHz and maximum frequency of 1.4 GHz. The significantly low noise figure of this radio frequency amplifier is 1.4 dB with a typical gain of 30 dB. input protected LNA amplifier PE15A63006 is rated at Volts DC maximum and mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.
1 : $925.99
5 : $888.95
10 : $851.91
0
PE15A1050

Pasternack Enterprises Key Specifications, Gain: 18 dB, Power Output: 16 dBm P1dB, Frequency, Min: 50 MHz, Frequency, Max: 1 GHz, Noise Figure, Max: 1.2 dB, Design: Low Noise, Voltage, DC Max: 18 Volts, Current, DC Max: 80 mA, Connector Series: SMA. 1 dB NF Low Noise Amplifier, Operating from 50 MHz to 1 GHz with 18 dB Gain, 16 dBm P1dB and SMA. PE15A1050 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 50 MHz and maximum frequency of 1 GHz. The significantly low noise figure of this radio frequency amplifier is 1.2 dB with a typical gain of 18 dB. LNA amplifier PE15A1050 is rated at 18 Volts DC maximum and 80 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.
1 : $1,200.0
5 : $1,152.0
10 : $1,104.0
0
PE15A1087

Pasternack Enterprises Key Specifications, Gain: 59 dB, Power Output: 18 dBm P1dB, Frequency, Min: 20 MHz, Frequency, Max: 6 GHz, Noise Figure, Max: 3 dB, Design: Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 300 mA, Connector Series: SMA. 2.0 dB NF Low Noise Amplifier, Operating from 20 MHz to 6 GHz with 59 dB Gain, 18 dBm P1dB and SMA. The PE15A1087 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This DC powered low noise amplifier has a female gender configuration for input and output ports. This SMA low noise amplifier has a minimum frequency of 20 MHz and maximum frequency of 6 GHz. The PE15A1087 low noise amplifier has 1.5:1 of typical VSWR (Voltage Standing Wave Ratio). This radio frequency amplifier has impressive typical performance that includes a very low noise figure of 2 dB, small signal gain of 59 dB, and gain flatness of 2 dB. Our 007 ADCC powered low noise amplifier is designed to operate on a 9/15 VDC voltage. The PE15A1087 007 low noise amplifier operates over the temperature range of -40 deg C and 85 deg C. This low noise amplifier has 18 dB of typical 1dB compression power and a maximum RF input power of -3 dBm. The Pasternack low noise amplifier features 250 mA typical DC current. Additional specs for this low noise amplifier can be found on its PDF specification datasheet and CAD drawings above. Our DC powered low noise radio frequency amplifier is part of over 40,000 RF, microwave, and millimeter wave components available from Pasternack. This coaxial low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect 007 DC powered low noise amplifier for your requirement.
1 : $2,130.0
5 : $2,044.8
10 : $1,959.6
25 : $1,874.4
0
PE15A63005

Pasternack Enterprises Key Specifications, Gain: 40 dB, Power Output: 10 dBm P1dB, Frequency, Min: 900 MHz, Frequency, Max: 1.2 GHz, Noise Figure, Max: 1.4 dB, Design: Input Protected Low Noise, Connector Series: SMA. 1.2 dB NF Input Protected Low Noise Amplifier, Operating from 900 MHz to 1.2 GHz with 40 dB Gain, 10 dBm P1dB and SMA. PE15A63005 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 900 MHz and maximum frequency of 1.2 GHz. The significantly low noise figure of this radio frequency amplifier is 1.4 dB with a typical gain of 40 dB. input protected LNA amplifier PE15A63005 is rated at Volts DC maximum and mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.
1 : $652.99
5 : $626.87
10 : $600.75
0
PE15A7009

Pasternack Enterprises
1 : $9,060.0
5 : $8,697.6
10 : $8,335.2
25 : $7,972.8
0

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Link to Datasheet   |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com