| Electronic Components Datasheet Search |
|
1509F-R1 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() NexGen Digital | MAL215099909E3 | Vishay Huntington | 12,900 | |||
| 415-0922 | 130 | |||||
![]() Pasternack Enterprises US | PE3C1509LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. SMA Male to 2.92mm Male Cable Using PE-SR402FLJ Coax, LF Solder, RoHS., Radio frequency assembly SMA male to 2.92mm male cable using PE-SR402FLJ coax, LF solder, RoHS from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to 2.92mm male cable using PE-SR402FLJ coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and 2.92mm cable connection on the other. Our SMA to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. PE3C1509LF/HS can also be known as a SMA plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. SMA plug to 2.92mm plug cable assembly PE3C1509LF/HS is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1509LF/HS can also be used in the other direction and will be 2.92mm male to SMA male cable assembly if the opposite connectivity is required. SMA plug to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to 2.92mm cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to 2.92mm male cable using PE-SR402FLJ coax, LF solder, RoHS. | 105 | ||
| PE3W01509 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to TNC Male Cable Using LMR-240-DB Coax. PE3W01509 is a SMA male right angle to TNC male cable using LMR-240-DB coax. This Pasternack SMA male right angle to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01509 SMA male right angle to TNC male cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 2 | |||
| PE3C11509 | Pasternack Enterprises | 0 | ||||
| PE3W15091 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. N Female Bulkhead to SMA Male Right Angle Cable Using SPP-250-LLPL Coax. PE3W15091 is a N female bulkhead to SMA male right angle cable using SPP-250-LLPL coax. This Pasternack N female bulkhead to SMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N bulkhead to male SMA right angle cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W15091 N female bulkhead to SMA male right angle cable assembly is constructed with SPP-250-LLPL coax. | 0 | |||
| PE3W15092/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW400, RF Cable Type: LMR-LW400, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using LMR-LW400 Coax with HeatShrink. PE3W15092/HS is a BNC male to BNC male cable using LMR-LW400 coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15092/HS BNC male to BNC male cable assembly is constructed with LMR-LW400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W15096 | Pasternack Enterprises | Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Receptacle, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: D-Sub, Connector Gender 2: Receptacle, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. D-Sub Receptacle to D-Sub Receptacle Cable Using LMR-195 Coax. PE3W15096 is a D-Sub receptacle to D-Sub receptacle cable using LMR-195 coax. This Pasternack D-Sub receptacle to D-Sub receptacle cable assembly uses a 50 Ohm D-Sub for connector 1 and a 50 Ohm D-Sub for connector 2. Our receptacle D-Sub to receptacle D-Sub cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15096 D-Sub receptacle to D-Sub receptacle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W15095LF | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. QMA Male Right Angle to SMA Male Cable Using RG141 Coax, LF Solder. PE3W15095LF is a QMA male right angle to SMA male cable using RG141 coax. This Pasternack QMA male right angle to SMA male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm SMA for connector 2. QMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male QMA right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15095LF QMA male right angle to SMA male cable assembly is constructed with RG141 coax. | 0 | |||
| PE3W15099 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Female to SMA Female Cable Using LMR-240 Coax. PE3W15099 is a reverse polarity TNC female to SMA female cable using LMR-240 coax. This Pasternack reverse polarity TNC female to SMA female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity female TNC to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15099 TNC reverse polarity female to SMA female cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W15092 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW400, RF Cable Type: LMR-LW400, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using LMR-LW400 Coax. PE3W15092 is a BNC male to BNC male cable using LMR-LW400 coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15092 BNC male to BNC male cable assembly is constructed with LMR-LW400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W01509/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to TNC Male Cable Using LMR-240-DB Coax with HeatShrink. PE3W01509/HS is a SMA male right angle to TNC male cable using LMR-240-DB coax. This Pasternack SMA male right angle to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01509/HS SMA male right angle to TNC male cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W15098-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 4.3-10 Female to NEX10 Male Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax with Times Microwave Components., Radio frequency assembly 4.3-10 female to NEX10 male low PIM cable 36 inch length using TFT-5G-402 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 female to NEX10 male low PIM cable 36 inch length using TFT-5G-402 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM 4.3-10 to NEX10 cable assembly has a female gender on end 1 and a male on end 2. PE3W15098-36 can also be known as a low PIM 4.3-10 jack to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3W15098-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 female to NEX10 male cable has a maximum VSWR of 1.4:1. 4.3-10 jack to NEX10 plug cable assembly PE3W15098-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W15098-36 can also be used in the other direction and will be a NEX10 male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to NEX10 cable assembly for quick shipment worldwide. Variations of 4.3-10 and NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W15097 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 4.3-10 Female Bulkhead to NEX10 Male Cable Using TFT-5G-402 Coax. PE3W15097 is a 4.3-10 female bulkhead to NEX10 male cable using TFT-5G-402 coax. This Pasternack 4.3-10 female bulkhead to NEX10 male cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm NEX10 for connector 2. Our female 4.3-10 bulkhead to male NEX10 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15097 4.3-10 female bulkhead to NEX10 male cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE3W15090/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. N Male to Reverse Polarity TNC Female Cable Using LMR-100 Coax with HeatShrink. PE3W15090/HS is a N male to reverse polarity TNC female cable using LMR-100A coax. This Pasternack N male to reverse polarity TNC female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to reverse polarity female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15090/HS N male to TNC reverse polarity female cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W15098-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Female to NEX10 Male Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax with Times Microwave Components., Radio frequency assembly 4.3-10 female to NEX10 male low PIM cable 12 inch length using TFT-5G-402 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 female to NEX10 male low PIM cable 12 inch length using TFT-5G-402 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM 4.3-10 to NEX10 cable assembly has a female gender on end 1 and a male on end 2. PE3W15098-12 can also be known as a low PIM 4.3-10 jack to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3W15098-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 female to NEX10 male cable has a maximum VSWR of 1.4:1. 4.3-10 jack to NEX10 plug cable assembly PE3W15098-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W15098-12 can also be used in the other direction and will be a NEX10 male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to NEX10 cable assembly for quick shipment worldwide. Variations of 4.3-10 and NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W21509 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 3.5mm Female Bulkhead to SMA Male Cable Using PE-P086HF Coax. PE3W21509 is a 3.5mm female bulkhead to SMA male cable using PE-P086HF coax. This Pasternack 3.5mm female bulkhead to SMA male cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm SMA for connector 2. Our female 3.5mm bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21509 3.5mm female bulkhead to SMA male cable assembly is constructed with PE-P086HF coax. | 0 | |||
![]() Vyrian | T1509033120-000 | TE Connectivity | Connector Accessory, Aluminum Alloy RoHS : Compliant | 12,383 | ||
| LT1509CSW#TR | Analog Devices Inc | Power Factor Controller With Post Regulator, Current-mode, 1.5A, 300kHz Switching Freq-Max, BIPolar, PDSO20 RoHS : Not Compliant | 12,023 | |||
| LT1509CN | Analog Devices Inc | Power Factor Controller With Post Regulator, Current-mode, 1.5A, 300kHz Switching Freq-Max, BIPolar, PDIP20 RoHS : Not Compliant | 9,341 | |||
SX1509QBIULTRT![]() | Semtech Corporation | Telecom Circuit, 1-Func RoHS : Compliant | 8,682 | |||
| LT1509CSW | Analog Devices Inc | Power Factor Controller With Post Regulator, Current-mode, 1.5A, 300kHz Switching Freq-Max, BIPolar, PDSO20 RoHS : Not Compliant | 6,758 | |||
| LT1509CN#PBF | Analog Devices Inc | Power Factor Controller With Post Regulator, Current-mode, 1.5A, 300kHz Switching Freq-Max, BIPolar, PDIP20 RoHS : Compliant | 6,313 | |||
| TMS2150-9JL | Texas Instruments | Memory Circuit, 512X9, MOS, CDIP24 RoHS : Not Compliant | 6,171 | |||
| LT1509CN-PBF | Analog Devices Inc | 6,147 | ||||
| LT1509CSW#PBF | Analog Devices Inc | Power Factor Controller With Post Regulator, Current-mode, 1.5A, 300kHz Switching Freq-Max, BIPolar, PDSO20 RoHS : Compliant | 5,710 | |||
| XQRKU060-1CNA1509Y | AMD Xilinx | Field Programmable Gate Array, 725550-Cell, CBGA1509 | 4,076 | |||
| XQR4VLX200-10CF1509V | AMD Xilinx | Field Programmable Gate Array, 22272 CLBs, 1028MHz, 200448-Cell, CMOS, CBGA1509 RoHS : Not Compliant | 3,526 | |||
| XQR4VFX140-10CF1509V | AMD Xilinx | Field Programmable Gate Array, 16128 CLBs, 1028MHz, 142128-Cell, CMOS, CBGA1509 RoHS : Not Compliant | 1,959 | |||
| XQRKU060-1CNA1509B | AMD Xilinx | Field Programmable Gate Array, 725550-Cell, CBGA1509 | 1,740 | |||
SX1509IULTRT![]() | Semtech Corporation | Telecom Circuit, 1-Func RoHS : Compliant | 261 | |||
| Z32041431509K6C000 | Vishay Intertechnologies | Fixed Resistor, Wire Wound, 3W, 15ohm, 10% +/-Tol, 100,180ppm/Cel, Through Hole Mount RoHS : Compliant | 249 | |||
![]() Waytek, Inc. | AL-11-50-9-C | Advanced Cable Ties Inc | ACT AL-11-50-9-C standard cable tie is a natural nylon 6/6 tie with 50 lb. tensile strength, a one-piece self-locking design, and reliable performance from -40F to 185F. Packaged in bags of 100, it is built to bundle wire, cable, hoses, and tubing in general-purpose applications. RoHS : Compliant |
| 200 | |
![]() Win Source Electronics | MMB02070C1509FB200 | Vishay Huntington | RES SMD 15 OHM 1% 1W 0207 / 15 Ohms ±1% 1W Chip Resistor MELF, 0207 Anti-Sulfur, Automotive AEC-Q200 Thin Film |
| 120,000 | |
| XL1509-3.3E1 | XL Semiconductors | 150kHz Step-down type Fixed 3.3V 2A SOP-8 Voltage Regulators - DC DC Switching Regulators RoHS |
| 40,158 | ||
AP1509-50SG-13![]() | Diodes Incorporated | IC REG BUCK 5V 2A 8SOIC RoHS : Compliant |
| 37,768 | ||
PIC16F1509-I/SS![]() | Microchip Technology Inc | IC MCU 8BIT 14KB FLASH 20SSOP RoHS : Compliant |
| 36,600 | ||
| XL1509-ADJE1 | XL Semiconductors | 2A 150KHz 40V Buck DC to DC Converter |
| 36,000 | ||
| TD1509PR | America Techcode Semiconductor Inc |
| 25,020 | |||
| MAX15091ETI+ | Maxim Integrated Products | Hot Swap Controller 1-CH 18V N-Channel Positive Voltage 28-Pin TQFN EP / IC CTRLR HOTSWAP 2.7V-18V 28TQFN RoHS : Compliant |
| 20,000 | ||
AP1509-33SG-13![]() | Diodes Incorporated | IC REG BUCK 3.3V 2A 8SOIC RoHS : Compliant |
| 17,500 | ||
SX1509BIULTRT![]() | Semtech Corporation | IC GPIO EXPANDER I2C 16CH 28QFN / I2C Interface 5.5V 28-Pin QFN-UT EP T/R RoHS : Compliant |
| 17,412 | ||
PIC16F1509T-I/SS![]() | Microchip Technology Inc | IC MCU 8BIT 14KB FLASH 20SSOP RoHS : Compliant |
| 16,000 | ||
PIC16LF1509-I/ML![]() | Microchip Technology Inc | IC MCU 8BIT 14KB FLASH 20QFN RoHS : Compliant |
| 12,310 | ||
| UPB1509GV-E1 | Celem Power Capacitors | MMIC PRESCALER 1GHZ 8-SSOP / RF IC Prescaler DBS 500MHz ~ 1GHz Divide by 2, 4, 8 8-SSOP |
| 9,640 | ||
PIC16LF1509-I/SS![]() | Microchip Technology Inc | IC MCU 8BIT 14KB FLASH 20SSOP RoHS : Compliant |
| 4,800 | ||
PIC16LF1509T-I/SS![]() | Microchip Technology Inc | IC MCU 8BIT 14KB FLASH 20SSOP RoHS : Compliant |
| 4,800 | ||
| 73415-0961 | Molex | 50Ohm Right Angle PCB Mnt MMCX Conn; jack; Solder Termination; DCto6GHz; RG178 RoHS : Compliant |
| 125 | ||
![]() Wuhan P&S | MAL215097102E3 | Vishay Intertechnologies | 220UF 50V 10X10X14 105��C 3000H RoHS : Compliant |
| 11,250 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |