| Electronic Components Datasheet Search |
|
138L-AE2-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | BSS138LT1G![]() | onsemi | - Tape and Reel (Alt: BSS138LT1G) RoHS : Compliant |
| 1,905,000 | |
BVSS138LT1G![]() | onsemi | Power MOSFET, N Channel, 50 V, 200 mA, 3.5 ohm, SOT-23, Surface Mount - Tape and Reel (Alt: BVSS138LT1G) RoHS : Compliant |
| 216,000 | ||
| ZW-02-20-G-D-677-138-LL | Samtec Inc | Board Stackers & Spacers, Pin Header, 17.2 mm, 4 Contacts, Solder, 2 Rows, 2.54 mm, ZW Series - Bulk (Alt: ZW-02-20-G-D-677-138-LL) RoHS : Compliant |
| 0 | ||
| BCS-138-L-S-DE | Samtec Inc | - Rail/Tube (Alt: BCS-138-L-S-DE) RoHS : Compliant |
| 0 | ||
| SSM-138-L-DV-BE | Samtec Inc | - Bulk (Alt: SSM-138-L-DV-BE) RoHS : Compliant |
| 0 | ||
| 54ACT138LMQB | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE - Rail/Tube (Alt: 54ACT138LMQB) RoHS : Not Compliant | 0 | |||
| ARC6-08-13.8-LU-LD-2R-1 | Samtec Inc | - Bulk (Alt: ARC6-08-13.8-LU-LD-2R-1) RoHS : Compliant |
| 0 | ||
| BCS-138-LM-D-PE | Samtec Inc | - Rail/Tube (Alt: BCS-138-LM-D-PE) RoHS : Compliant |
| 0 | ||
| 65863-138LF | Amphenol Corporation | - Trays (Alt: 65863-138LF) RoHS : Compliant |
| 0 | ||
| SFMC-138-L1-SM-D | Samtec Inc | - Rail/Tube (Alt: SFMC-138-L1-SM-D) RoHS : Compliant |
| 0 | ||
| SFMC-138-L3-L-D | Samtec Inc | - Bulk (Alt: SFMC-138-L3-L-D) RoHS : Compliant | 0 | |||
BSS138LT1![]() | onsemi | - Tape and Reel (Alt: BSS138LT1) RoHS : Not Compliant | 0 | |||
| BSS138L | onsemi | Single N-Channel Logic Level Power MOSFET 50V, 200mA, 3.5O - Tape and Reel (Alt: BSS138L) RoHS : Compliant | 0 | |||
| BSS138L | onsemi | Single N-Channel Logic Level Power MOSFET 50V, 200mA, 3.5O - Tape and Reel (Alt: BSS138L) RoHS : Compliant | 0 | |||
| SFMC-138-L3-S-D | Samtec Inc | PCB Receptacle, Board-to-Board, Wire-to-Board, 1.27 mm, 2 Rows, 76 Contacts, Through Hole Mount - Rail/Tube (Alt: SFMC-138-L3-S-D) RoHS : Compliant |
| 0 | ||
![]() Newark | BSS138LT3G![]() | onsemi | N Channel Mosfet, 50V, 200Ma Sot-23; Cha |Onsemi BSS138LT3G RoHS : Compliant |
| 32,697 | |
BSS138LT1G![]() | onsemi | Pwr Mosfet, N Channel, 50V, 200Ma; |Onsemi BSS138LT1G RoHS : Compliant |
| 29,455 | ||
BSS138LT1G![]() | onsemi | Pwr Mosfet, N Channel, 50V, 200Ma; |Onsemi BSS138LT1G RoHS : Compliant |
| 29,455 | ||
BVSS138LT1G![]() | onsemi | Pwr Mosfet, N Channel, 50V, 200Ma; |Onsemi BVSS138LT1G RoHS : Compliant |
| 25,195 | ||
BVSS138LT1G![]() | onsemi | Pwr Mosfet, N Channel, 50V, 200Ma; |Onsemi BVSS138LT1G RoHS : Compliant |
| 25,195 | ||
BVSS138LT1G![]() | onsemi | Mosfet, N-Ch, 50V, 0.2A, Sot-23; |Onsemi BVSS138LT1G RoHS : Not Compliant |
| 10,600 | ||
BVSS138LT1G![]() | onsemi | Mosfet, N-Ch, 50V, 0.2A, Sot-23; |Onsemi BVSS138LT1G RoHS : Not Compliant |
| 10,600 | ||
BSS138LT3G![]() | onsemi | N Channel Mosfet, 50V, 200Ma Sot-23; Cha |Onsemi BSS138LT3G RoHS : Compliant |
| 8,585 | ||
BSS138LT3G![]() | onsemi | N Channel Mosfet, 50V, 200Ma Sot-23; Cha |Onsemi BSS138LT3G RoHS : Compliant |
| 8,585 | ||
BSS138LT1G![]() | onsemi | Mosfet, N, 50V, 0.2A, Sot-23; |Onsemi BSS138LT1G RoHS : Compliant |
| 6,000 | ||
BSS138LT1G![]() | onsemi | Mosfet, N, 50V, 0.2A, Sot-23; |Onsemi BSS138LT1G RoHS : Compliant |
| 6,000 | ||
| BCS-138-L-D-PE | Samtec Inc | Socket, 2.54Mm, Pass-Thru, 2X38Way; |Samtec, Inc. BCS-138-L-D-PE RoHS : Compliant |
| 273 | ||
| SEN0138-L | DFRobot | Miniature Micro Sw, left5Varduino Brd; |Dfrobot SEN0138-L RoHS : Not Compliant |
| 17 | ||
| BSS138L | onsemi | Mosfet, N-Channel, 50V, 0.2A, Sot-23-3; |Onsemi BSS138L RoHS : Compliant |
| 2 | ||
| BSS138L | onsemi | Mosfet, N-Channel, 50V, 0.2A, Sot-23-3; |Onsemi BSS138L RoHS : Compliant |
| 2 | ||
![]() RS | 5138LA | Arrow Hart | WALLPLATE 2G TOGGLE/DUPLEX NYLON STD LA |
| 0 | |
| 63453138LF | Amphenol FCi | 63453-138LF-MTK VCC |
| 0 | ||
| 3138LT-150 | American Beauty Tools | 150 WATT SOLDERING IRON (NO TIP) |
| 0 | ||
| 66373138LF | Amphenol FCi | 66373-138LF-QKE HDR SEAHOUSE |
| 0 | ||
| 65863-138LF | Amphenol FCi | QKE HDR-65863-138LF RoHS : Compliant |
| 0 | ||
| 9527840138LF | Amphenol FCi | BERGSTIK SMT |
| 0 | ||
| 7731380138LF | Amphenol FCi | BERGSTIK |
| 0 | ||
| 98464G6138LF | Amphenol FCi | MINITEK |
| 0 | ||
| 9840110138LF | Amphenol FCi | BERGSTIK |
| 0 | ||
| 7731310138LF | Amphenol FCi | BERGSTIK |
| 0 | ||
| 9527880138LF | Amphenol FCi | BERGSTIK |
| 0 | ||
| 59202S3810138LF | Amphenol FCi | MTK R/R SMT HDR |
| 0 | ||
| CN200B110-13.8/LC | TDK-Lambda Corporation | DC-DC CONVERTER, 200W, 43-160VIN, 13.8VOUT, 14.5A, LATCHING, CN-B110 SERIES |
| 0 | ||
| CN300B110-13.8/LC | TDK-Lambda Corporation | DC-DC CONVERTER, 300W, 43-160VIN, 13.8VOUT, 21.7A, LATCHING, CN-B110 SERIES |
| 0 | ||
| LTA211-PB-B-A/125N (103-05415138|LTA211-PB-B-A/125N|LTA211PBBA/125N) | Carling Technologies | SWITCH;ROCKER;SPST;ILLUMINATED;LTA SERIES |
| 0 | ||
![]() Bisco Industries | TER-0138-L92-06-00 | MISCELLANEOUS | 13 | |||
| TER-0138-L15-06-03 | MISCELLANEOUS | 6 | ||||
![]() Rochester Electronics | BSS138L | onsemi | Single N-Channel Logic Level Power MOSFET 50V, 200mA, 3.5Ω RoHS : Compliant |
| 5,874 | |
| SBVS138LT1G | onsemi | SBVS138LT1G - MOSFET N-CH 50V 0.2A SOT-23 RoHS : Compliant |
| 51,000 | ||
![]() Sager | CN200B110-13.8/LC | TDK-Lambda Corporation | Isolated DC/DC Converters - Through Hole DC-DC, PCB Mount, Half Brick, Input 110VDC, Output 13.8V 14.5A, 200W + Latching OVP/OTP |
| 0 | |
| BCS-138-L-D-DE-028 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-138-L-D-DE-073 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-138-L-D-HE-024 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-138-L-D-PE-008 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-138-L-D-PE-053 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-138-L-D-TE-004 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-138-L-S-DE | Samtec Inc | Headers & Wire Housings Pass-Through Socket Strip, 0.100 pitch RoHS : Compliant |
| 0 | ||
| BCS-138-L-S-DE-029 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-138-L-S-HE-025 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-138-L-S-PE-009 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-138-L-S-TE-005 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ESQ-121-38-L-D | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| ESQ-131-38-L-S | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| BCS-138-L-D-DE-014 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
![]() Coilcraft Direct | HP3-0138LD | Coilcraft Inc | Hexa-Path configurable magnetics, high current, SMT, RoHS RoHS : Compliant |
| 97 | |
| HPH3-0138LD | Coilcraft Inc | Hexa-Path configurable magnetics, high inductance, SMT, RoHS RoHS : Compliant |
| 0 | ||
![]() TME | BSS138LT1G![]() | onsemi | Transistor: N-MOSFET; unipolar; 50V; 0.2A; 0.225W; SOT23 RoHS : Compliant |
| 32,924 | |
| MMUN2138LT1G | onsemi | Transistor: PNP; bipolar; BRT; 50V; 0.1A; 0.246W; SOT23,TO236AB RoHS : Compliant |
| 3,620 | ||
BVSS138LT1G![]() | onsemi | Transistor: N-MOSFET; unipolar; 50V; 0.2A; 0.225W; SOT23 RoHS : Compliant |
| 968 | ||
BSS138LT3G![]() | onsemi | Transistor: N-MOSFET; unipolar; 50V; 0.2A; Idm: 0.8A; 0.225W; SOT23 RoHS : Compliant |
| 499 | ||
| BSS138L | onsemi | Transistor: N-MOSFET; unipolar; 50V; 0.2A; Idm: 0.8A; 0.225W; SOT23 RoHS : Compliant |
| 187 | ||
| SEN0138-L | DFRobot | Sensor: touch; left; digital; 5VDC; Ch: 1; Gravity; Arduino |
| 10 | ||
| ARC6-16-13.8-LU-LD-2-1 | Samtec Inc | Cable; PIN: 50; 350.52mm; PVC; blue; gold-plated; 34AWG; 100Ω; 13.8" RoHS : Compliant |
| 0 | ||
| ARC6-08-13.8-LU-LU-3-1 | Samtec Inc | Cable; PIN: 26; 350.52mm; PVC; blue; gold-plated; 34AWG; 100Ω; 13.8" RoHS : Compliant |
| 0 | ||
| ARC6-08-13.8-LU-LD-2-1 | Samtec Inc | Cable; PIN: 26; 350.52mm; PVC; blue; gold-plated; 34AWG; 100Ω; 13.8" RoHS : Compliant |
| 0 | ||
| PJA138L_R1_00501 | PanJit Semiconductor | Transistor: P-MOSFET; unipolar; -20V; -3.6A; SOT23-6 |
| 0 | ||
| PJX138L_R1_00002 | PanJit Semiconductor | Transistor: N-MOSFET x2; unipolar; 60V; 160mA; Idm: 0.8A; 223W RoHS : Compliant |
| 0 | ||
| PJV138L_R1_00001 | PanJit Semiconductor | Transistor: P-MOSFET; unipolar; -60V; -3A; SOT223 |
| 0 | ||
| PJT138L_R1_00001 | PanJit Semiconductor | Transistor: N/P-MOSFET; unipolar; 30V; 300mA; SOT363 RoHS : Compliant |
| 0 | ||
| ARC6-16-13.8-LU-LU-3-1 | Samtec Inc | Cable; PIN: 50; 350.52mm; PVC; blue; gold-plated; 34AWG; 100Ω; 13.8" RoHS : Compliant |
| 0 | ||
| PJC138L_R1_00001 | PanJit Semiconductor | Transistor: N-MOSFET; unipolar; 115V; 91.4A; DFN5060-8 RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | BSS138LT1G![]() | onsemi | N-Channel 50 V 3.5 Ohm 225 mW Surface Mount Power MOSFET - SOT-23 RoHS : Compliant | 4,379 | ||
![]() ComSIT USA | BSS138LT1G | ON SEMICONDUCTOR/ONSEMI | AVAILABLE EU | 16,910 | ||
![]() ComSIT USA | BVSS138LT1G![]() | onsemi | POWER MOSFET Small Signal Field-Effect Transistor, 0.2A I(D), 50V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-236 RoHS : Compliant | 2,155,395 | ||
BSS138LT1G![]() | onsemi | POWER MOSFET Small Signal Field-Effect Transistor, 0.2A I(D), 50V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-236 RoHS : Compliant | 6,571 | |||
![]() Interstate Connecting Components | 65863-138LF | Amphenol FCi | QKE HDR RoHS : Compliant |
| 0 | |
| 447NS135NF3213-8LBT | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 85674-1138LF | Amphenol FCi | 85674-1138LF-METRAL HDR 1 RoHS : Compliant |
| 0 | ||
| 88922-138LF | Amphenol FCi | 88922-138LF-4RX2M SIGNAL HDR, RoHS : Compliant | 0 | |||
| 10-40561-38/LG10 | Glenair Inc |
| 0 | |||
![]() NexGen Digital | BVSS138LT1G![]() | onsemi | RoHS : Compliant | 11,760 | ||
| HPH3-0138LD | Coilcraft Inc | RoHS : Compliant | 7,600 | |||
BSS138LT1G![]() | onsemi | RoHS : Compliant | 7,101 | |||
![]() PEI Genesis | FGG.2B.138.LN | LEMO connectors |
| 0 | ||
![]() Powell Electronics | ZW-02-20-G-D-677-138-LL | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 503 | |
| ZW-08-11-G-D-667-138-LL | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 302 | ||
| BCS-138-L-D-HE | Samtec Inc | Pass-Through Socket Strip, 0.100" pitch RoHS : Compliant |
| 195 | ||
| BCS-138-L-D-TE | Samtec Inc | Pass-Through Socket Strip, 0.100" pitch RoHS : Compliant |
| 195 | ||
| BCS-138-L-D-PE | Samtec Inc | Pass-Through Socket Strip, 0.100" pitch RoHS : Compliant |
| 180 | ||
| BCS-138-L-S-TE | Samtec Inc | Pass-Through Socket Strip, 0.100" pitch RoHS : Compliant |
| 180 | ||
| ESQ-111-38-L-S | Samtec Inc | PCB Header, 2.54mm Pitch, Elevated, Squa RoHS : Compliant |
| 26 | ||
![]() PUI | BSS138L | onsemi | RoHS : Compliant | 3,000 | ||
![]() Richardson RFPD | BVSS138LT1G![]() | onsemi | Trans MOSFET N-CH 50V 0.2A Automotive AEC-Q101 3-P RoHS : Compliant | 0 | ||
| 0SQ71Q710138-L/F | W L Gore & Associates | RF CUSTOM CABLE ASSY RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | BSS138LT1G![]() | onsemi | INSTOCK RoHS : Compliant | 19,515 | ||
| PJX138L_R1_00001 | PanJit Semiconductor | INSTOCK RoHS : Compliant | 5,197 | |||
BSS138LT1G![]() | onsemi | INSTOCK RoHS : Compliant | 3,000 | |||
BSS138LT1G![]() | onsemi | INSTOCK RoHS : Compliant | 627 | |||
![]() Avnet Abacus | 77313-101-38LF | Amphenol Corporation | Conn Unshrouded Header HDR 38 POS 254mm Solder ST ThruHole Poly Bag (Alt: 77313-101-38LF) RoHS : Compliant | 0 | ||
| ARC6-16-13.8-LU-LU-3-1 | Samtec Inc | AcceleRate Slim Cable Assembly 0635 mm Pit (Alt: ARC6-16-13.8-LU-LU-3-1) RoHS : Compliant | 0 | |||
![]() Avnet Asia | BVSS138LT1G![]() | onsemi | Power MOSFET, N Channel, 50 V, 200 mA, 3.5 ohm, SOT-23, Surface Mount (Alt: BVSS138LT1G) RoHS : Compliant | 0 | ||
| 10174690-1SF138LF | Amphenol Corporation | FCI10174690-1SF138LF BK220 IO (Alt: 10174690-1SF138LF) RoHS : Compliant | 0 | |||
| PJA138L | PanJit Semiconductor | (Alt: PJA138L) RoHS : Compliant | 0 | |||
| 77318-138LF | Amphenol Corporation | (Alt: 77318-138LF) RoHS : Compliant | 0 | |||
| 10172495-1F0138LF | Amphenol Corporation | FCI10172495-1F0138LF CABLE POWERBLADE 80 (Alt: 10172495-1F0138LF) RoHS : Compliant | 0 | |||
| PJA138L_R1_00001 | PanJit Semiconductor | (Alt: PJA138L_R1_00001) RoHS : Compliant | 0 | |||
BSS138LT1G![]() | onsemi | (Alt: BSS138LT1G) RoHS : Compliant | 0 | |||
BSS138LT3G![]() | onsemi | (Alt: BSS138LT3G) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MMUN2138LT1G | onsemi | PNP Bipolar Digital Transistor BRT ONSSPCTRNSTME1D1N (Alt: MMUN2138LT1G) RoHS : Compliant | 27,000 | ||
| PJC138L_R1_00001 | PanJit Semiconductor | (Alt: PJC138L_R1_00001) RoHS : Compliant | 6,000 | |||
BSS138LT3G![]() | onsemi | Power MOSFET N Channel 50 V 200 mA 35 ohm SOT23 Surface Mount (Alt: BSS138LT3G) RoHS : Compliant | 0 | |||
BSS138LT1G![]() | onsemi | Power MOSFET N Channel 50 V 200 mA 35 ohm SOT23 Surface Mount (Alt: BSS138LT1G) RoHS : Compliant | 0 | |||
BVSS138LT1G![]() | onsemi | Power MOSFET N Channel 50 V 200 mA 35 ohm SOT23 Surface Mount (Alt: BVSS138LT1G) RoHS : Compliant | 0 | |||
| PJT138L_R1_00001 | PanJit Semiconductor | (Alt: PJT138L_R1_00001) RoHS : Compliant | 0 | |||
| PJT138L_R2_00001 | PanJit Semiconductor | (Alt: PJT138L_R2_00001) RoHS : Compliant | 0 | |||
| PJX138L_R1_00001 | PanJit Semiconductor | (Alt: PJX138L_R1_00001) RoHS : Compliant | 0 | |||
| PJX138L_R2_00001 | PanJit Semiconductor | (Alt: PJX138L_R2_00001) RoHS : Compliant | 0 | |||
| PJA138L_R1_00001 | PanJit Semiconductor | (Alt: PJA138L_R1_00001) RoHS : Compliant | 0 | |||
| PJE138L_R1_00001 | PanJit Semiconductor | E8LTR7HF4KSOT523MOSSOTNFET60TBMNNF60TBQI01PJ (Alt: PJE138L_R1_00001) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | BSS138LT1![]() | onsemi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4,874 | |
BSS138LT1G![]() | onsemi | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,003 | ||
| P20138L1 | PMI | IN STOCK SHIP TODAY | 1 | |||
![]() EBV Elektronik | BSS138LT1G![]() | onsemi | Power MOSFET N Channel 50 V 200 mA 35 ohm SOT23 Surface Mount (Alt: BSS138LT1G) RoHS : Compliant | 18,570,000 | ||
| MMUN2138LT1G | onsemi | PNP Bipolar Digital Transistor BRT ONSSPCTRNSTME1D1N (Alt: MMUN2138LT1G) RoHS : Compliant | 300,000 | |||
BSS138LT3G![]() | onsemi | Power MOSFET N Channel 50 V 200 mA 35 ohm SOT23 Surface Mount (Alt: BSS138LT3G) RoHS : Compliant | 0 | |||
BVSS138LT1G![]() | onsemi | Power MOSFET N Channel 50 V 200 mA 35 ohm SOT23 Surface Mount (Alt: BVSS138LT1G) RoHS : Compliant | 0 | |||
| VESBSS138LT1G | onsemi | (Alt: BSS138LT1G) RoHS : Compliant | 0 | |||
![]() Flip Electronics | BSS138LT1G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 186,900 | |
BSS138LT3G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 10,000 | ||
BSS138LT3![]() | onsemi | Stock RoHS : Not Compliant | 1,000 | |||
BVSS138LT1G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,000 | ||
![]() Maritex | LBSS138LT1G | VBsemi Electronics Co Ltd | MOSFETs; LBSS138LT1G; VBSEMI; 200 mA; 20 V |
| 2,724 | |
BVSS138LT1G![]() | onsemi | MOSFETs; BVSS138LT1G; ON SEMICONDUCTOR; 200 mA; 3.5 ?; 20 V RoHS : Compliant |
| 2,527 | ||
| BSS138LT3G | VBsemi Electronics Co Ltd | MOSFETs; BSS138LT3G; VBSEMI; 50 V; 200 mA; 20 V; 225 mW |
| 662 | ||
BSS138LT1G![]() | onsemi | MOSFETs; BSS138LT1G; ON SEMICONDUCTOR; 50 V; 200 mA; 20 V; 225 mW RoHS : Compliant |
| 3 | ||
![]() Master Electronics | BCS-138-L-D-DE-028 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | |
| BCS-138-L-D-DE-073 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-138-L-D-HE-024 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-138-L-D-PE-008 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-138-L-D-PE-053 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-138-L-D-TE-004 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-138-L-S-DE | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-138-L-S-DE-029 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-138-L-S-PE-009 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-138-L-S-TE-005 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| MRTD-03-20-L-13.8-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ESQ-121-38-L-D | Samtec Inc | Conn Elevated Socket SKT 42 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| ESQ-131-38-L-S | Samtec Inc | Conn Elevated Socket SKT 31 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| BCS-138-L-D-DE-014 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-138-L-D-HE-010 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3138LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMA Male Cable 60 Inch Length Using PE-P195 Coax, LF Solder., Radio frequency assembly SMA male to SMA male cable 60 inch length using PE-P195 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 60 inch length using PE-P195 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3138LF-60, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3138LF-60 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 60 inch length using PE-P195 coax, LF solder. |
| 919 | |
| PE3138LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to SMA Male Cable 48 Inch Length Using PE-P195 Coax, LF Solder., Radio frequency assembly SMA male to SMA male cable 48 inch length using PE-P195 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 48 inch length using PE-P195 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3138LF-48, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3138LF-48 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 48 inch length using PE-P195 coax, LF solder. |
| 919 | ||
| PE3138LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Male Cable 12 Inch Length Using PE-P195 Coax, LF Solder., Radio frequency assembly SMA male to SMA male cable 12 inch length using PE-P195 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 12 inch length using PE-P195 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3138LF-12, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3138LF-12 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 12 inch length using PE-P195 coax, LF solder. |
| 919 | ||
| PE3138LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using PE-P195 Coax, LF Solder., Radio frequency assembly SMA male to SMA male cable 36 inch length using PE-P195 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 36 inch length using PE-P195 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3138LF-36, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3138LF-36 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 36 inch length using PE-P195 coax, LF solder. |
| 919 | ||
| PE3138LF-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to SMA Male Cable 6 Inch Length Using PE-P195 Coax, LF Solder., Radio frequency assembly SMA male to SMA male cable 6 inch length using PE-P195 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 6 inch length using PE-P195 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3138LF-6, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3138LF-6 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 6 inch length using PE-P195 coax, LF solder. |
| 919 | ||
| PE3W00138LF | Pasternack Enterprises | 357 | ||||
| PE3W00138LF-48 | Pasternack Enterprises |
| 51 | |||
| PE3W00138LF-36 | Pasternack Enterprises |
| 51 | |||
| PE36138LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 12 inches. 7/16 DIN Male to 7/16 DIN Male Cable 12 Inch Length Using RG401 Coax, RoHS., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 12 inch length using RG401 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 12 inch length using RG401 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE36138LF-12, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36138LF-12 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 12 inch length using RG401 coax, RoHS. |
| 0 | ||
| PE34138LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to N Male Cable 60 Inch Length Using PE-SR402AL Coax., Radio frequency assembly N male to N male cable 60 inch length using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 60 inch length using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our type N to N type cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE34138LF-60, can also be known as a N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE34138LF-60 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency N type male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 60 inch length using PE-SR402AL coax. |
| 0 | ||
| PE36138LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 24 inches. 7/16 DIN Male to 7/16 DIN Male Cable 24 Inch Length Using RG401 Coax, RoHS., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 24 inch length using RG401 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 24 inch length using RG401 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE36138LF-24, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36138LF-24 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 24 inch length using RG401 coax, RoHS. |
| 0 | ||
| PE36138LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 48 inches. 7/16 DIN Male to 7/16 DIN Male Cable 48 Inch Length Using RG401 Coax, RoHS., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 48 inch length using RG401 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 48 inch length using RG401 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE36138LF-48, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36138LF-48 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 48 inch length using RG401 coax, RoHS. |
| 0 | ||
| PE34138LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length: 48 inches. N Male to N Male Cable 48 Inch Length Using PE-SR402AL Coax., Radio frequency assembly N male to N male cable 48 inch length using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 48 inch length using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE34138LF-48, can also be known as a type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE34138LF-48 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency N type male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 48 inch length using PE-SR402AL coax. |
| 0 | ||
| PE34138LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Male Cable 12 Inch Length Using PE-SR402AL Coax., Radio frequency assembly N male to N male cable 12 inch length using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 12 inch length using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE34138LF-12, can also be known as a type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE34138LF-12 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 12 inch length using PE-SR402AL coax. |
| 0 | ||
| PE34138LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to N Male Cable 36 Inch Length Using PE-SR402AL Coax., Radio frequency assembly N male to N male cable 36 inch length using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 36 inch length using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our type N to N type cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE34138LF-36, can also be known as a N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE34138LF-36 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 36 inch length using PE-SR402AL coax. |
| 0 | ||
![]() Teledyne HiRel | 54F138LMQB | Teledyne HiRel | DECODER, 3-TO-8-LINE | 0 | ||
![]() Vyrian | TMDXL138LOGICEXP-B | Texas Instruments | 9,747 | |||
| BVSS138LT3G | onsemi | Small Signal Field-Effect Transistor, 0.2A I(D), 50V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-236 RoHS : Compliant | 9,408 | |||
| BSS138/L99Z | National Semiconductor Corporation | Small Signal Field-Effect Transistor, 0.22A I(D), 50V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-236AB | 8,942 | |||
| TMDXL138LOGICEXP | Texas Instruments | 8,857 | ||||
| SBVS138LT1G | onsemi | 8,044 | ||||
54F138LM![]() | Texas Instruments | Decoder/Driver, F/FAST Series, Inverted Output, TTL, CQCC20 | 7,076 | |||
| KTM-SX3138LLV/4G | Kingston Technology Company | 6,412 | ||||
| UCD3138LLCEVM-028 | Texas Instruments | 5,723 | ||||
| BSS138LT7G | onsemi | Small Signal Field-Effect Transistor, 0.2A I(D), 50V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-236 RoHS : Compliant | 5,172 | |||
54F138LMQB![]() | Texas Instruments | Decoder/Driver, F/FAST Series, Inverted Output, TTL, CQCC20 | 4,338 | |||
| 54LS138LMQB | National Semiconductor Corporation | Decoder/Driver, TTL, CQCC20 | 3,523 | |||
| KTM-SX3138LLV/2G | Kingston Technology Company | 3,370 | ||||
| KTM-SX3138LV/4G | Kingston Technology Company | 3,198 | ||||
MAX1138LEEE![]() | Maxim Integrated Products | ADC, Successive Approximation, 10-Bit, 1 Func, 12 Channel, Serial Access, BICMOS, PDSO16 RoHS : Not Compliant | 390 | |||
| LBSS138LT1G | Leshan Radio | Small Signal Field-Effect Transistor, 0.2A I(D), 50V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-236AB | 357 | |||
![]() Win Source Electronics | BSS138LT1![]() | onsemi | MOSFET N-CH 50V 200MA SOT-23 / N-Channel 50 V 200mA (Ta) Surface Mount SOT-23-3 (TO-236) RoHS : Not Compliant |
| 990,000 | |
BSS138LT3G![]() | onsemi | Power MOSFET 200 mA, 50 V RoHS : Compliant |
| 990,000 | ||
BSS138LT1G![]() | onsemi | MOSFET N-CH 50V 200MA SOT-23 RoHS : Compliant |
| 944,420 | ||
| LBSS138LT1G | LRC Leshan Radio Co Ltd | Power MOSFET 200 mAmps, 50 Volts N-hannel SOT-3 RoHS : Compliant |
| 388,990 | ||
| BSS138L | onsemi | MOSFET N-CH 50V 200MA SOT23-3 RoHS : Compliant |
| 333,000 | ||
BSS138LT3![]() | onsemi | MOSFET N-CH 50V 200MA SOT23-3 RoHS : Not Compliant |
| 303,740 | ||
BVSS138LT1G![]() | onsemi | MOSFET N-CH 50V 200MA SOT-23-3 RoHS : Compliant |
| 300,000 | ||
| BVSS138LT3G | Innovision Semiconductor | MOSFET N-CH 50V 200MA SOT-23-3 |
| 285,630 | ||
| 6N138-L | Lite-On Semiconductor Corporation | 6N138 Series 1 Channel 5000 Vrms Through Hole Optocoupler - DIP-8 |
| 6,154 | ||
![]() Wuhan P&S | BVSS138LT1G![]() | onsemi | RoHS : Compliant |
| 489,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |