137-AE3-D-R Price, Distributor, Stock

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to SMA Male Right Angle Low Loss Cable Using LMR-195-UF Coax, LF Solder., Radio frequency assembly TNC female bulkhead to SMA male right angle low loss cable using LMR-195-UF coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to SMA male right angle low loss cable using LMR-195-UF coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC bulkhead cable connection on one end and a right angle SMA cable connection on the other. Our low loss TNC to right angle SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W13717LF can also be known as a low loss TNC jack to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13717LF RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our bulkhead TNC female to right angle SMA male cable has a maximum VSWR of 1.4:1. TNC jack to SMA plug cable assembly PE3W13717LF is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13717LF can also be used in the other direction and will be a right angle SMA male to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

8,149

PE44137

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SMB, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 4 GHz, Interface Type 1: .042 inch End Launch. SMB Jack Connector Solder Attachment .042 inch End Launch PCB, .020 inch x .010 inch Contact. PE44137 SMB jack pcb connector has an interface type of .042 inch end launch and a 50 Ohm impedance. Pasternack SMB jack connector uses shield/contact solder as an attachment method. Our jack SMB pcb connector provides a minimum frequency of DC and a maximum frequency of 4 GHz. The Pasternack SMB jack pcb connector has a PTFE dielectric type and a VSWR of 1.3. The Pasternack SMB pcb connector has a brass body with gold plating. Our PE44137 SMB connector uses beryllium copper contact. This SMB jack pcb RF connector is RoHS and REACH compliant. This Pasternack jack SMB connector will ship the same day as purchased. Our SMB jack connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMB connector cable assemblies that will ship the same day as well.

1 : $39.59
25 : $37.61
50 : $35.63
100 : $34.05

1,263

PE34413-72

Pasternack Enterprises

Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length: 72 inches. MHV Male to SHV Plug Cable 72 Inch Length Using RG141 Coax., Radio frequency assembly MHV male to SHV plug cable 72 inch length using RG141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MHV male to SHV plug cable 72 inch length using RG141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and SHV cable connection on the other. Our MHV to SHV cable assemblies have a male gender on end 1 and plug on end 2. This MHV to SHV cable is a male to plug coax assembly, PE34413-72, can also be known as a MHV plug to SHV male cable assembly and will be shipped same-day as it is purchased. MHV plug to SHV male cable assembly PE34413-72 is built with RG141 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MHV male to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34413-72 can also be used in the other direction and will be SHV plug to MHV male cable assembly if the opposite connectivity is required. MHV plug to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to SHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV male to SHV plug cable 72 inch length using RG141 coax.

1 : $160.99
25 : $152.94
50 : $144.89

356

PE3C1377LF-6

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 6 inches. 2.92mm Male to 2.92mm Male Cable 6 Inch Length Using PE-SR405FL Coax, RoHS., Radio frequency assembly 2.92mm male to 2.92mm male cable 6 inch length using PE-SR405FL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.92mm male to 2.92mm male cable 6 inch length using PE-SR405FL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. This 2.92mm to 2.92mm cable is a male to male coax assembly, PE3C1377LF-6, can also be known as a 2.92mm plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 2.92mm plug cable assembly PE3C1377LF-6 is built with PE-SR405FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.92mm male to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.92mm plug to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 2.92mm male cable 6 inch length using PE-SR405FL coax, RoHS.
RoHS : Unknown

1 : $231.99
25 : $220.39
50 : $208.79

318

PE3C1377-60

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 60 inches. 2.92mm Male to 2.92mm Male Cable 60 Inch Length Using PE-SR405FL Coax., Radio frequency assembly 2.92mm male to 2.92mm male cable 60 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.92mm male to 2.92mm male cable 60 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. This 2.92mm to 2.92mm cable is a male to male coax assembly, PE3C1377-60, can also be known as a 2.92mm plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 2.92mm plug cable assembly PE3C1377-60 is built with PE-SR405FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.92mm male to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.92mm plug to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 2.92mm male cable 60 inch length using PE-SR405FL coax.

1 : $211.99
25 : $201.39
50 : $190.79

246

PE3M0137-18

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL-27478, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 18 inches. Temperature Conditioned SMA Female to SMA Male Right Angle Low Loss Cable 18 Inch Length Using PE-P142LL Coax., Pasternack temperature conditioned SMA female to SMA male right angle low loss cable 18 inch length using PE-P142LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0137-18 is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability SMA to SMA cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with SMA connection on one end and right angle SMA connection on the other. Our low loss SMA to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This SMA to SMA cable is a female to male coax assembly. PE3M0137-18 can also be known as a temperature conditioned low loss SMA jack to right angle SMA plug cable assembly and will be shipped the same day after it is purchased. SMA jack to SMA plug cable assembly PE3M0137-18 is built with PE-P142LL which is a flexible coax. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency SMA female to SMA right angle male cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0137-18 can be used in the other direction and will be right angle SMA male to SMA female cable assembly. Pasternack high reliability low loss SMA jack to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for same-day shipment worldwide. Variations of PE44814 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned SMA female to SMA male right angle low loss cable 18 inch length using PE-P142LL coax.

1 : $856.99
25 : $814.14
50 : $771.29
100 : $737.01

PE-W137TF007-24

Pasternack Enterprises

Key Specifications, Waveguide Size 1: WR-137, Flange Type 1: CMR, Waveguide Size 2: WR-137, Flange Type 2: CMR, Length: 24, Frequency, Min: 5.85 GHz, Frequency, Max: 8.2 GHz, Max Power (CW): 2,000. WR-137 Twistable Flexible Waveguide 24 Inch, CMR Flange Operating from 5.85 to 8.2 GHz. Pasternack’s PE-W137TF007-24 flexible waveguide is twistable in design. This twistable flexible waveguide assembly has WR-137 waveguides on sides 1 and 2, respectively. Our 24-inch twistable waveguide is one of over 40,000 RF, microwave, and millimeter wave components. The WR-137 flexible waveguide, along with our other RF components, will ship worldwide on the same day of purchase. This flexible waveguide assembly body is made of brass. The twistable waveguide is covered by a neoprene jacket which protects the waveguide and provides mechanical support. This waveguide section operates within the frequency range of 5.85 GHz to 8.2 GHz. Our WR-137 flexible waveguide is designed with the CMR flange on side 1 and side 2. This brass twistable waveguide assembly has a typical VSWR of 1.09:1. This flexible waveguide has CMR flanges made of brass for input and output. Our waveguide assembly has a typical insertion loss of 0.11 dB. Our RF, microwave and millimeter wave products maintain a 99.4% availability and are part of the broadest selection in the industry. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality WR-137 flexible/twistable waveguide assembly that meets your requirements.

1 : $1,180.0
5 : $1,132.8
10 : $1,085.6
25 : $1,038.4

PE3C11379LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Cable Using PE-SR402FL Coax, LF Solder. PE3C11379LF is a SMA male right angle to SMA female cable using PE-SR402FL coax. This Pasternack SMA male right angle to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C11379LF SMA male right angle to SMA female cable assembly is constructed with PE-SR402FL coax.

PE3C1371LF-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to 7/16 DIN Male Low Loss Cable 60 Inch Length Using LMR-400 Coax, LF Solder., Radio frequency assembly N male to 7/16 DIN male low loss cable 60 inch length using LMR-400 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male low loss cable 60 inch length using LMR-400 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our low loss type N to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3C1371LF-60 can also be known as a low loss N type plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N plug to 7/16 DIN plug cable assembly PE3C1371LF-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1371LF-60 can also be used in the other direction and will be 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male low loss cable 60 inch length using LMR-400 coax, LF solder.

1 : $173.99
25 : $165.29
50 : $156.59
100 : $149.63

PE3W01379-24

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 24 inches. Reverse Polarity TNC Female Bulkhead to MMCX Plug Cable 24 Inch Length Using LMR-100 Coax., Radio frequency assembly reverse polarity TNC female bulkhead to MMCX plug cable 24 inch length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Reverse polarity TNC female bulkhead to MMCX plug cable 24 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to MMCX cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity TNC bulkhead cable connection on one end and MMCX cable connection on the other. Our low loss reverse polarity TNC to MMCX cable assemblies have a female gender on end 1 and plug on end 2. This reverse polarity TNC to MMCX cable is a female to plug coax assembly, PE3W01379-24, can also be known as a low loss reverse polarity TNC jack to MMCX male cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC jack to MMCX male cable assembly PE3W01379-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to MMCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency reverse polarity TNC female bulkhead to MMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01379-24 can also be used in the other direction and will be MMCX plug to reverse polarity TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC reverse polarity jack bulkhead to MMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to MMCX cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC female bulkhead to MMCX plug cable 24 inch length using LMR-100 coax.

1 : $136.99
25 : $130.14
50 : $123.29
100 : $117.81

PE3W02137/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to TNC Male Cable Using LMR-240 Coax with HeatShrink. PE3W02137/HS is a SMA male right angle to TNC male cable using LMR-240 coax. This Pasternack SMA male right angle to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02137/HS SMA male right angle to TNC male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W13711

Pasternack Enterprises

Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. NEX10 Male to N Female Cable Using SPP-250-LLPL Coax. PE3W13711 is a NEX10 male to N female cable using SPP-250-LLPL coax. This Pasternack NEX10 male to N female cable assembly uses a 50 Ohm NEX10 for connector 1 and a 50 Ohm N for connector 2. Our male NEX10 to female N cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W13711 NEX10 male to N female cable assembly is constructed with SPP-250-LLPL coax.

PE3W13748

Pasternack Enterprises

PE3W13793

Pasternack Enterprises

Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. D-Sub Plug to N Male Cable Using LMR-195 Coax. PE3W13793 is a D-Sub plug to N male cable using LMR-195 coax. This Pasternack D-Sub plug to N male cable assembly uses a 50 Ohm D-Sub for connector 1 and a 50 Ohm N for connector 2. Our plug D-Sub to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13793 D-Sub plug to N male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20137

Pasternack Enterprises

Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. QN Male Right Angle to N Male Cable Using PE-SR402FL Coax. PE3W20137 is a QN male right angle to N male cable using PE-SR402FL coax. This Pasternack QN male right angle to N male cable assembly uses a 50 Ohm QN for connector 1 and a 50 Ohm N for connector 2. QN right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male QN right angle to male N cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W20137 QN male right angle to N male cable assembly is constructed with PE-SR402FL coax.

Venkel Ltd.

MELFC0102-RE-1371BT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�25PPM;1.37K;�0.1%
RoHS : Compliant

MELFC0102-UZ-1371FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�15PPM;1.37K;�1%
RoHS : Compliant

MELFC0102-YE-1370DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�25PPM;137R;�0.5%
RoHS : Compliant

MELFC0204-TC-1371CT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;1.37K;�0.25%
RoHS : Compliant

MELFC0204-TE-1374FT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�25PPM;1.37M;�1%
RoHS : Compliant

MELFC0204-ZE-1374DT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�25PPM;1.37M;�0.5%
RoHS : Compliant

MELFC0204-ZP-1372CT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�5PPM;13.7K;�0.25%
RoHS : Compliant

MELFC0207-VC-1372CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�50PPM;13.7K;�0.25%
RoHS : Compliant

MELFC0207-VN-1370BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�10PPM;137R;�0.1%
RoHS : Compliant

MELFC0207-XC-1373BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�50PPM;137K;�0.1%
RoHS : Compliant

UPTF0402-16W-P-1370DT

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�5PPM;137R;�0.5%
RoHS : Compliant

UPTF0603-16W-P-1370BT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;137R;�0.1%
RoHS : Compliant

UPTF0603-16W-P-1371UT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;1.37K;�0.01%
RoHS : Compliant

UPTF0805-10W-N-1371CT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�10PPM;1.37K;�0.25%
RoHS : Compliant

UPTF0805-10W-P-1372DT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�5PPM;13.7K;�0.5%
RoHS : Compliant

Vyrian

1707137

Phoenix Contact

Barrier Strip Terminal Block, 16A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

13,301

1833137

Phoenix Contact

Modular Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

10,811

74AC11379

Texas Instruments

8,058

5962-01-375-5501

Texas Instruments

Operational Amplifier, 2 Func, 20000uV Offset-Max, PDIP14
RoHS : Not Compliant

7,838

AU1374800MBD

Broadcom Limited

7,720

5962-01-374-0057

Analog Devices Inc

A/D Converter, 16-Bit, 1 Func, Hybrid, CDIP32

7,672

6N137500ECY6N137

Broadcom Limited

7,333

OPA137NA-250G4

Texas Instruments

5,645

SN74ALS137N-10

Texas Instruments

Decoder/Driver, ALS Series, Inverted Output, TTL, PDIP16

4,648

BCM3137

Broadcom Limited

RoHS : Not Compliant

4,297

3213726

Phoenix Contact

Modular Terminal Block, 15A, 1.5mm2, 1 Row(s), 3 Deck(s)
RoHS : Compliant

4,200

XN2D-1371

OMRON Corporation

Board Connector, 3 Contact(s), 1 Row(s), Female, Straight, 0.079 inch Pitch, Solder Terminal, Locking, Black Insulator, Socket
RoHS : Compliant

4,183

BCM63137USA01

Broadcom Limited

4,011

1851371

Phoenix Contact

Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

4,008

SN54HCT137J-00

Texas Instruments

Decoder/Driver, HCT Series, Inverted Output, CMOS, CDIP16

3,501

Waytek, Inc.

13711548

Aptiv PLC

1.0 MM Female Terminal HES TXL 18-16GA .75-1.00 MM2 3000/Reel DEUTSCH 1062-20-0222
RoHS : Compliant

3,000 : $0.1956
15,000 : $0.1826

18,000

13783266

Aptiv PLC

2.4 MM Size 12 MaleTerminal HES TXL 16-14 1.5-2.5 MM2 Reel 2000/Reel DEUTSCH 1060-12-166

2,000 : $0.1831
10,000 : $0.1788

16,000

8911377

Aptiv PLC

Aptiv 8911377 conduit clip for corrugated loom is a loom-mounting clip designed to secure conduit runs to panels or structures. Its formed clip design helps support organized routing and reliable retention of corrugated loom in vehicle and equipment harness applications.

50 : $0.1528
200 : $0.1446
500 : $0.1342
1,000 : $0.1289

8,833

19137-0005

Molex

22-18 GA # 6 Block Spade Nylon Terminal Extra Sleeve BRASS SUPPORT SLEEVE

100 : $0.4126
200 : $0.3751
500 : $0.3348
1,000 : $0.3028
5,000 : $0.289

7,348

13783290

Aptiv PLC

2.4 MM Size 12 Female Terminal HES GXL 16-14 1.5-2.5 MM2 Reel disc way, no repl

2,000 : $0.3893
40,000 : $0.3641

6,000

13783289

Aptiv PLC

2.4 MM Size 12 Female Terminal HES TXL 16-14 1.5-2.5 MM2 Reel DEUTSCH 1062-12-166 2000 Reel

2,000 : $0.6665
10,000 : $0.6169

4,000

19137-0024

Molex

16-14 GA # 10 Block Spade Nylon Terminal Extra Sleeve BRASS SUPPORT SLEEVE 31528

100 : $0.3726
200 : $0.3561
500 : $0.3342
1,000 : $0.3205

3,815

13711542-L

Aptiv PLC

1.0 MM Male Terminal HES TXL 22-20 .35-.50 MM2 1371152 DEUTSCH 1060-20-0222

50 : $0.1822
200 : $0.1756
500 : $0.1699
1,000 : $0.1613

2,850

13711544-L

Aptiv PLC

1.0 MM Male Terminal HES TXL 18-16 .75-1.0 MM2 13711544 DEUTSCH 1060-20-0222

50 : $0.2398
200 : $0.2278
500 : $0.2114
1,000 : $0.2031

1,633

13783265-L

Aptiv PLC

2.4 MM SIZE 12 Male Terminal HES TXL 16-14 1.5-2.5 MM2 HES DEUTSCH 1060-12-166

20 : $0.0729
50 : $0.0655
100 : $0.0595
200 : $0.0577
500 : $0.0558
1,000 : $0.0538

1,258

06137

East Penn Manufacturing Company

Red Battery Clamp Vinyl Clad Handles 600 Amp RATED TO 600 AMPS

1 : $6.13
10 : $5.52
50 : $5.06
100 : $4.6
200 : $4.28
500 : $3.97

396

13783269-L

Aptiv PLC

2.4 MM SIZE 12 Male Terminal HES TXL 12-10GA 4.00-6.00 MM2 DEUTSCH 1060-12-222

20 : $0.486
50 : $0.4334
100 : $0.3936
200 : $0.3808
500 : $0.368
1,000 : $0.3538

370

13783293-L

Aptiv PLC

2.4 MM SIZE 12 Female Terminal HES TXL 12-10GA 4.00-6.00 MM2 DEUTSCH 1062-12-0222

15 : $1.8811
50 : $1.6776
100 : $1.5236
200 : $1.4741
500 : $1.4246
1,000 : $1.3696

309

13711544

Aptiv PLC

1.0 MM Male Terminal HES Reel TXL 18-16 GA .75-1.00 MM2 DEUTSCH 1060-20-0222 obsolete
RoHS : Compliant

3,000 : $0.1319
15,000 : $0.1197

13783293

Aptiv PLC

2.4 MM Size 12 Female Terminal HES TXL 12-10GA 4-6 MM2 Reel DEUTSCH 1062-12-0222 2000/RL
RoHS : Compliant

2,000 : $0.9484
10,000 : $0.8856

Win Source Electronics

LM13700M

Texas Instruments

LM13700 Dual Operational Transconductance Amplifiers with Linearizing Diodes and Buffers | IC OPAMP TRANSCOND 2 CIRC 16SOIC
RoHS : Not Compliant

805 : $0.3728
645 : $0.3879
500 : $0.4031
350 : $0.4334
225 : $0.4485
105 : $0.4788

40,000

TPA3137D2PWPR

Texas Instruments

IC AMP CLASS D STER 6W 28HTSSOP / TPA3137D2 6-W Inductor Free Stereo (BTL) Class-D Audio Amplifier with Ultra Low EMI
RoHS : Compliant

330 : $1.0282
265 : $1.0699
205 : $1.1117
145 : $1.1953
95 : $1.237
45 : $1.3207

22,510

BT137S-800E

Nexperia

4,245 : $0.0707
3,170 : $0.0789
2,455 : $0.0816
1,780 : $0.0843
1,150 : $0.087
475 : $0.106

14,770

OPA137NA3KG4

Texas Instruments

190 : $1.5841
152 : $1.6485
117 : $1.7129
82 : $1.8417
53 : $1.9061
25 : $2.0349

8,370

MC13783VK5R2

Freescale Semiconductor

IC PWR MNGMNT ATLAS 3G 247MAPBGA
RoHS : Compliant

55 : $6.1684
44 : $6.4192
34 : $6.6699
24 : $7.1714
16 : $7.4221
8 : $7.9237

6,510

TPS613783QWRTERQ1

Texas Instruments

IC REG BOOST ADJ 16WQFN
RoHS : Compliant

135 : $2.2364
108 : $2.3273
83 : $2.4182
58 : $2.6
38 : $2.691
18 : $2.8728

5,384

LT1376HVCS8#PBF

Linear Technology

IC REG BUCK SEPIC ADJ 1.5A 8SOIC
RoHS : Compliant

37 : $10.5105
28 : $11.7233
22 : $12.1275
16 : $12.5318
10 : $12.936
5 : $15.7658

5,000

S1D13706F00A2

Epson Electronics America Inc

IC GRAPHIC LCD CTRLR 100TQFP

15 : $26.8099
11 : $29.9029
9 : $30.9338
7 : $31.9661
4 : $32.9971
2 : $40.2142

2,898

LT1370IR

Linear Technology

500kHz High Efficiency 6A Switching Regulator
RoHS : Not Compliant

15 : $20.4873
11 : $22.8512
9 : $23.6391
7 : $24.4271
4 : $25.2151
2 : $30.7309

2,700

LT1372CS8#TRPBF

Linear Technology

IC REG MULT CONFIG INV ADJ 8SOIC
RoHS : Compliant

30 : $10.1385
23 : $11.3083
18 : $11.6982
13 : $12.0882
9 : $12.4781
4 : $15.2077

1,950

BT137S-800G

Nexperia

Triacs

995 : $0.3384
795 : $0.3525
615 : $0.3666
430 : $0.3948
275 : $0.4089
130 : $0.437

1,860

OPA2137U

Texas Instruments

IC OPAMP GP 1MHZ 8SOIC
RoHS : Compliant

139 : $2.434
104 : $2.7148
80 : $2.8084
58 : $2.902
38 : $2.9957
16 : $3.6509

1,619

LT1371CR#PBF

Linear Technology

IC REG MULT CONFIG INV ADJ D2PAK
RoHS : Compliant

21 : $16.6487
16 : $18.5697
12 : $19.21
9 : $19.8503
6 : $20.4906
3 : $24.973

930

LT1374IS8#PBF

Linear Technology

IC REG BUCK SEPIC ADJ 4.5A 8SOIC
RoHS : Compliant

20 : $15.5454
15 : $17.3391
12 : $17.937
9 : $18.5349
6 : $19.1328
3 : $23.3181

489

AD8137YCPZ-REEL7

Analog Devices Inc

SP Amp DIFF AMP Single R-R O/P ±6V/12V Automotive 8-Pin LFCSP EP T/R / IC OPAMP DIFF 110MHZ RRO 8LFCSP
RoHS : Compliant

58 : $5.8057
44 : $6.4756
34 : $6.6989
25 : $6.9222
16 : $7.1455
7 : $8.7086

430

Wuhan P&S

NCP137AFCT105T2G

onsemi

LDO regulator, 700mA, 1.05V
RoHS : Compliant

1 : $0.5316
100 : $0.3394
500 : $0.2798
1,000 : $0.2573

60,000

137-AE3-D-R Distributor

Link URL