 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
1304-R2 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 PUI | A401304 | Eaton Bussmann | RoHS : Compliant | 200 | ||
 Rutronik | NPM1304-CAAA-R7 | Nordic Semiconductor | PMIC for small size batteries RoHS : Compliant |
| 1,500 | |
| NPM1304-QEAA-R7 | Nordic Semiconductor | PMIC for small size batteries RoHS : Compliant |
| 1,500 | ||
| NPM1304-EK | Nordic Semiconductor | Evaluation Kit nPM1304 EK RoHS : Compliant |
| 11 | ||
 Braemac Americas-Symmetry | NPM1304-EK | Nordic Semiconductor | nPM1304 Evaluation Kit |
| 1 | |
| NPM1304-CAAA-R7 | Nordic Semiconductor | nPM1304 Power Management IC |
| 0 | ||
| NPM1304-QEAA-R7 | Nordic Semiconductor | nPM1304 Power Management IC |
| 0 | ||
APAKN1304-C2G-T | Abracon Corporation | RF ANT 1.575/1.602GHZ CER PATCH RoHS : Compliant |
| 0 | ||
| NPM1304-QEAA-R | Nordic Semiconductor | nPM1304 Power Management IC |
| 0 | ||
APAKN1304-S2450-T | Abracon Corporation | RF ANT COMP 2.4GHZ WIFI/BL PATCH RoHS : Compliant |
| 0 | ||
APAKN1304-S5517-T | Abracon Corporation | RF ANT 5GHZ CER PATCH SOLDER SMD RoHS : Compliant |
| 0 | ||
| NPM1304-CAAA-R | Nordic Semiconductor | nPM1304 Power Management IC |
| 0 | ||
| TEC11WHT1.3048 | Taoglas Antenna Solutions | Taoglas Ethernet Cable, RJ45, RJ45, White, Premium SF/FTP Cat6A 26 AWG, 10ft (3048mm), Circular, Stranded, Drain Wire, Snagless, 50 mirco-in gold, 6.3mm OD |
| 0 | ||
 EBV Elektronik | RN1304,LF(T | Toshiba America Electronic Components | (Alt: RN1304,LF(T) RoHS : Compliant | 42,000 | ||
| UES1304E3 | Microchip Technology Inc | (Alt: UES1304E3) RoHS : Compliant | 0 | |||
| RN1304,LXHF(T | Toshiba America Electronic Components | Bipolar PreBiased Digital Transistor NPN 50 V 100 mA 47 kohm 47 kohm (Alt: RN1304,LXHF(T) RoHS : Compliant | 0 | |||
| CYBT-213043-02 | Infineon Technologies AG | Bluetooth Module V 50 LE EDR Class 2 2402GHz to 248GHz 4 dBm CYW20819 95dBm (Alt: SP005673429) RoHS : Compliant | 0 | |||
MCP130-450I/SN | Microchip Technology Inc | Processor Supervisor 4375V 3V33V5V 8Pin SOIC N Tube (Alt: MCP130-450I/SN) RoHS : Compliant | 0 | |||
| CA13043_TINA3-W | LEDIL | Clear Polymethyl Methacrylate Lens with White Polycarbonate Holder and Black Polyurethane Tape 161 (Alt: CA13043_TINA3-W) RoHS : Compliant | 0 | |||
MCP130-450DI/TO | Microchip Technology Inc | Processor Supervisor 4375V 3V33V5V 3Pin TO92 Bag (Alt: MCP130-450DI/TO) RoHS : Compliant | 0 | |||
| TCD1304DG(8Z,K) | Toshiba America Electronic Components | (Alt: TCD1304DG(8Z,K)) RoHS : Compliant | 0 | |||
| MCP130-475DI/TO | Microchip Technology Inc | Processor Supervisor 4625V 3V33V5V 3Pin TO92 Bag (Alt: MCP130-475DI/TO) RoHS : Compliant | 0 | |||
| 1304B156M2500BD | Microchip Technology Inc | LVPECL Hybrid Clock Oscillator (Alt: 1304B156M2500BD) RoHS : Not Compliant | 0 | |||
| MCP130-475HI/TO | Microchip Technology Inc | Processor Supervisor 4625V 3V33V5V 3Pin TO92 Bag (Alt: MCP130-475HI/TO) RoHS : Compliant | 0 | |||
| CA13045_TINA3-WWW | LEDIL | ASSEMBLY ROUND 1 POS 161MM D 729MMH (Alt: CA13045_TINA3-WWW) RoHS : Compliant | 0 | |||
| A7672E(MAMA) S2-1304W | SIMCom | (Alt: A7672E(MAMA) S2-1304W) RoHS : Compliant | 0 | |||
| ELUA2016OGB-P6070R13040060-V21M | Everlight Electronics Co Ltd | UV LED (Alt: H110004652) RoHS : Compliant | 0 | |||
| ELUA2835TG0-P9000SC13040150-VA1D(CM) | Everlight Electronics Co Ltd | UV LED Series ELUA2835TG0CM (Alt: H110005155) RoHS : Compliant | 0 | |||
 Flip Electronics | L130-4095001400001 | Lumileds | Stock, Ship Today RoHS : Compliant |
| 345,000 | |
| L130-4090003000W21 | Lumileds | Stock, Ship Today RoHS : Compliant |
| 50,000 | ||
| L130-4080002011001 | Lumileds | Stock, Ship Today RoHS : Compliant |
| 50,000 | ||
| L130-4090HA3000DD1 | Lumileds | Stock, Ship Today RoHS : Compliant |
| 50,000 | ||
| A1304ELHLT-T | Allegro MicroSystems LLC | Stock, Ship Today |
| 18,000 | ||
| CYBT-213043-02 | Infineon Technologies AG | Stock RoHS : Compliant | 1,000 | |||
 Pasternack Enterprises US | PE33130-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 48 inches. BNC Male to BNC Male Cable 48 Inch Length Using RG178 Coax., Radio frequency assembly BNC male to BNC male cable 48 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 48 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33130-48, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33130-48 is built with RG178 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 48 inch length using RG178 coax. |
| 56 | |
| PE3W09130-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Female to SMA Male Cable 48 Inch Length Using RG142 Coax., Radio frequency assembly TNC female to SMA male cable 48 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC female to SMA male cable 48 inch length using RG142 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and SMA cable connection on the other. Our TNC to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W09130-48 can also be known as a TNC jack to SMA plug cable assembly and will be shipped same-day as it is purchased. TNC jack to SMA plug cable assembly PE3W09130-48 is built with RG142 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency TNC female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09130-48 can also be used in the other direction and will be SMA male to TNC female cable assembly if the opposite connectivity is required. TNC jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female to SMA male cable 48 inch length using RG142 coax. |
| 27 | ||
| PE3W13045/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. QMA Male Right Angle to N Female 4 Hole Flange Cable Using RG142 Coax with HeatShrink. PE3W13045/HS is a QMA male right angle to N female 4 hole flange cable using RG142 coax. This Pasternack QMA male right angle to N female 4 hole flange cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm N for connector 2. QMA right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male QMA right angle to female N 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13045/HS QMA male right angle to N female 4 hole flange cable assembly is constructed with RG142 coax. | 0 | |||
| PE3W13046LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Female Bulkhead to BNC Male Right Angle Low Loss Cable Using LMR-100 Coax with HeatShrink, LF Solder in 48 Inch., Radio frequency assembly TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 48 inch from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 48 inch, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC bulkhead cable connection on one end and right angle BNC cable connection on the other. Our low loss TNC to right angle BNC cable assemblies have a female gender on end 1 and male on end 2. This TNC to BNC cable is a female to male coax assembly, PE3W13046LF/HS-48, can also be known as a low loss TNC jack to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. TNC jack to BNC plug cable assembly PE3W13046LF/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency TNC female bulkhead to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13046LF/HS-48 can also be used in the other direction and will be right angle BNC male to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 48 inch. |
| 0 | ||
| PE3W13046LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. TNC Female Bulkhead to BNC Male Right Angle Low Loss Cable Using LMR-100 Coax with HeatShrink, LF Solder in 200CM., Radio frequency assembly TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 200CM from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 200CM, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC bulkhead cable connection on one end and right angle BNC cable connection on the other. Our low loss TNC to right angle BNC cable assemblies have a female gender on end 1 and male on end 2. This TNC to BNC cable is a female to male coax assembly, PE3W13046LF/HS-200CM, can also be known as a low loss TNC jack to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. TNC jack to BNC plug cable assembly PE3W13046LF/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency TNC female bulkhead to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13046LF/HS-200CM can also be used in the other direction and will be right angle BNC male to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 200CM. |
| 0 | ||
| PE3W11304LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W13046LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Female Bulkhead to BNC Male Right Angle Low Loss Cable Using LMR-100 Coax with HeatShrink, LF Solder in 24 Inch., Radio frequency assembly TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 24 inch from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 24 inch, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC bulkhead cable connection on one end and right angle BNC cable connection on the other. Our low loss TNC to right angle BNC cable assemblies have a female gender on end 1 and male on end 2. This TNC to BNC cable is a female to male coax assembly, PE3W13046LF/HS-24, can also be known as a low loss TNC jack to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. TNC jack to BNC plug cable assembly PE3W13046LF/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency TNC female bulkhead to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13046LF/HS-24 can also be used in the other direction and will be right angle BNC male to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 24 inch. |
| 0 | ||
| PE3W13040LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using LMR-LW195 Coax with HeatShrink, LF Solder. PE3W13040LF/HS is a N male right angle to N male right angle cable using LMR-LW195 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13040LF/HS N male right angle to N male right angle cable assembly is constructed with LMR-LW195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13046LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Female Bulkhead to BNC Male Right Angle Low Loss Cable Using LMR-100 Coax with HeatShrink, LF Solder in 36 Inch., Radio frequency assembly TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 36 inch from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 36 inch, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC bulkhead cable connection on one end and right angle BNC cable connection on the other. Our low loss TNC to right angle BNC cable assemblies have a female gender on end 1 and male on end 2. This TNC to BNC cable is a female to male coax assembly, PE3W13046LF/HS-36, can also be known as a low loss TNC jack to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. TNC jack to BNC plug cable assembly PE3W13046LF/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency TNC female bulkhead to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13046LF/HS-36 can also be used in the other direction and will be right angle BNC male to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 36 inch. |
| 0 | ||
| PE3W13044/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. N Female 4 Hole Flange to QMA Male Right Angle Cable Using RG142 Coax with HeatShrink. PE3W13044/HS is a N female 4 hole flange to QMA male right angle cable using RG142 coax. This Pasternack N female 4 hole flange to QMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. N to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N 4 hole flange to male QMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13044/HS N female 4 hole flange to QMA male right angle cable assembly is constructed with RG142 coax. | 0 | |||
| PE3W01304 | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. UHF Male to BNC Female Cable Using LMR-195 Coax. PE3W01304 is a UHF male to BNC female cable using LMR-195 coax. This Pasternack UHF male to BNC female cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm BNC for connector 2. Our male UHF to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01304 UHF male to BNC female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C11304 | Pasternack Enterprises | Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. C Male to N Male Cable Using RG214 Coax. PE3C11304 is a C male to N male cable using RG214 coax. This Pasternack C male to N male cable assembly uses a 50 Ohm C for connector 1 and a 50 Ohm N for connector 2. Our male C to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C11304 C male to N male cable assembly is constructed with RG214 coax. | 0 | |||
| PE3W13046LF/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. TNC Female Bulkhead to BNC Male Right Angle Low Loss Cable Using LMR-100 Coax with HeatShrink, LF Solder in 100CM., Radio frequency assembly TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 100CM from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 100CM, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC bulkhead cable connection on one end and right angle BNC cable connection on the other. Our low loss TNC to right angle BNC cable assemblies have a female gender on end 1 and male on end 2. This TNC to BNC cable is a female to male coax assembly, PE3W13046LF/HS-100CM, can also be known as a low loss TNC jack to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. TNC jack to BNC plug cable assembly PE3W13046LF/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency TNC female bulkhead to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13046LF/HS-100CM can also be used in the other direction and will be right angle BNC male to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 100CM. |
| 0 | ||
| PE3W13048LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to SMA Female Cable Using LMR-195-UF Coax with HeatShrink, LF Solder. PE3W13048LF/HS is a reverse polarity SMA male right angle to SMA female cable using LMR-195-UF coax. This Pasternack reverse polarity SMA male right angle to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13048LF/HS SMA reverse polarity male right angle to SMA female cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13049 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to SMA Male Cable Using RG400 Coax. PE3W13049 is a TNC female bulkhead to SMA male cable using RG400 coax. This Pasternack TNC female bulkhead to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our female TNC bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13049 TNC female bulkhead to SMA male cable assembly is constructed with RG400 coax. | 0 | |||
 Venkel Ltd. | MELFC0204-TE-1304FT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�25PPM;1.3M;�1% RoHS : Compliant | 0 | ||
| MELFC0204-ZE-1304DT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�25PPM;1.3M;�0.5% RoHS : Compliant | 0 | |||
| TFCR2512-2W-K-1304BT | VENKEL LTD | Thin Film CR;2512;1/2W;�100PPM;1.3M;�0.1% RoHS : Compliant | 0 | |||
| PWCR0805-RK-1304FT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�100PPM;1.3M;�1% RoHS : Compliant | 0 | |||
| CRG0402-P-1304FT | VENKEL LTD | RoHS 10/10 Green CR;0402;1/16W;1.3M;�1% RoHS : Compliant | 0 | |||
| PWCR0805-RK-1304DT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�100PPM;1.3M;�0.5% RoHS : Compliant | 0 | |||
| TFCR1210-4W-C-1304FT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;1.3M;�1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-E-1304DT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�25PPM;1.3M;�0.5% RoHS : Compliant | 0 | |||
| MELFC0207-XC-1304DT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�50PPM;1.3M;�0.5% RoHS : Compliant | 0 | |||
| CR0603-16W-1304FT | VENKEL LTD | Chip Resistor;0603;1/16W;1.3M;�1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-C-1304DT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;1.3M;�0.5% RoHS : Compliant | 0 | |||
| TFCR2512-2W-E-1304BT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�25PPM;1.3M;�0.1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-K-1304CT | VENKEL LTD | Thin Film CR;2512;1/2W;�100PPM;1.3M;�0.25% RoHS : Compliant | 0 | |||
| PWCR1206-UK-1304FT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;1.3M;�1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-E-1304FT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�25PPM;1.3M;�1% RoHS : Compliant | 0 | |||
 Waytek, Inc. | 3901-3043 | Molex | 4 Pin Free Hanging Plug Mini Fit JR MOLEX PN 39013043 |
| 5,146 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand