| Electronic Components Datasheet Search |
|
13003ADGL-T92-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() GLYN GmbH & Co. KG | PJS008-2130-0 | Yamaichi Electronics Co Ltd | microSD push/push top mount w/o position pins RoHS : Compliant | 955 | ||
| CCAB-GRE-BL-1300-CG25051401BAA | Great Ideal Co Ltd | Backlight-Cable PD10ANI + CETML156025LUDYA6420301 | 1 | |||
![]() PUI | 351300 | 706 | ||||
| 0313004.HXP | 100 | |||||
| 346-93-110-41-013000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 60 | |||
| T130087 | 1 | |||||
![]() Avnet Asia | NPM1300-QEAA-R | Nordic Semiconductor | (Alt: NPM1300-QEAA-R) RoHS : Compliant | 20,000 | ||
| AP61300Z6-7 | Diodes Incorporated | (Alt: AP61300Z6-7) RoHS : Compliant |
| 15,000 | ||
| MTSW-130-05-F-S-129 | Samtec Inc | Variable Height PCB Header Strips, 0.100"" pitch (Alt: MTSW-130-05-F-S-129) RoHS : Compliant |
| 4,000 | ||
| 3413.0002.11 | Schurter Electronic Components | (Alt: 3413.0002.11) RoHS : Compliant | 2,200 | |||
| HS-31413-001 | Amphenol Corporation | ASSY,CBL,EXA,16X2.5BP,S4,C6600 (Alt: HS-31413-001) RoHS : Compliant |
| 1,700 | ||
| TRTCX2113-0000ES | Vishay Intertechnologies | TRTCX2113 ES E3 (Alt: TRTCX2113-0000ES) RoHS : Compliant | 1,250 | |||
| PSAS6F3130021TR | Amphenol Corporation | (Alt: PSAS6F3130021TR) RoHS : Compliant |
| 600 | ||
| PSAS5F2130021TR | Amphenol Corporation | Conn PCIe/SAS Receptacle 68 POS 0.8/1.27mm Solder RA SMD T/R (Alt: PSAS5F2130021TR) RoHS : Compliant |
| 10 | ||
| TFM-130-02-S-DH | Samtec Inc | (Alt: TFM-130-02-S-DH) RoHS : Compliant |
| 5 | ||
| MPQ1300-12V108-L48NBMC | Murata Manufacturing Co Ltd | Non Isolated POL DC/DC Converter, PMBus Interface, ITE & Industrial, Quarter Brick, DIP, 1 Output (Alt: MPQ1300-12V108-L48NBMC) RoHS : Compliant | 5 | |||
| 5130.0001 | Schurter Electronic Components | (Alt: 5130.0001) RoHS : Compliant | 0 | |||
| ERJ2RKF1300X | Panasonic Electronic Components | SMD Chip Resistor, 130 ohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film (Alt: ERJ2RKF1300X) RoHS : Compliant | 0 | |||
| ESQT-130-02-GF-Q-368 | Samtec Inc | Board Stackers & Spacers, Socket Strip, 9.35 mm, 120 Contacts, Solder, 4 Rows, 2 mm, ESQT Series (Alt: ESQT-130-02-GF-Q-368) RoHS : Compliant | 0 | |||
| ME1005610130011 | Amphenol Corporation | (Alt: ME1005610130011) RoHS : Compliant | 0 | |||
| PSAS5F2130022TR | Amphenol Corporation | SSIO,PCIE SAS R/A RCPT 68P (Alt: PSAS5F2130022TR) RoHS : Compliant | 0 | |||
![]() Avnet Silica | NPM1300-CAAA-R7 | Nordic Semiconductor | PMIC with battery charger 32800mA fuel gauge 2x Buck 2x LDOLS 4x GPIO 3x LED drivers (Alt: NPM1300-CAAA-R7) RoHS : Compliant | 25,500 | ||
| NPM1300-CAAA-R | Nordic Semiconductor | PMIC with battery charger 32800mA fuel gauge 2x Buck 2x LDOLS 4x GPIO 3x LED drivers (Alt: NPM1300-CAAA-R) RoHS : Compliant | 7,000 | |||
| AP61300Z6-7 | Diodes Incorporated | (Alt: AP61300Z6-7) RoHS : Compliant | 6,000 | |||
| PHE13009,127 | WeEn Semiconductor Co Ltd | Trans GP BJT NPN 400V 12A 3Pin3Tab TO220AB Tube (Alt: PHE13009,127) RoHS : Compliant | 5,000 | |||
ST13007![]() | STMicroelectronics | Trans GP BJT NPN 400V 8A 3Pin3Tab TO220 Tube (Alt: ST13007) RoHS : Compliant | 3,350 | |||
ST13007D![]() | STMicroelectronics | Trans GP BJT NPN 400V 8A 3Pin3Tab TO220 Tube (Alt: ST13007D) RoHS : Compliant | 2,000 | |||
ST13003-K![]() | STMicroelectronics | Trans GP BJT NPN 400V 15A 3Pin3Tab SOT32 Bag (Alt: ST13003-K) RoHS : Compliant | 2,000 | |||
| PHE13007,127 | WeEn Semiconductor Co Ltd | Trans GP BJT NPN 400V 8A 3Pin3Tab TO220AB Tube (Alt: PHE13007,127) RoHS : Compliant | 2,000 | |||
| PHE13005,127 | WeEn Semiconductor Co Ltd | Trans GP BJT NPN 400V 4A 3Pin3Tab TO220AB Tube (Alt: PHE13005,127) RoHS : Compliant | 1,000 | |||
| FJP13009TU | onsemi | HighVoltage FastSwitching NPN Power Transistor ONSSPCTRNSTLT1T0R (Alt: FJP13009TU) RoHS : Compliant | 600 | |||
| NPM1300-EK | Nordic Semiconductor | Evaluation Kit nPM1300 Battery Management System Power Management (Alt: NPM1300-EK) RoHS : Compliant | 6 | |||
| EG912UGLAA-I05-SGNSA/03A20-0130001300 | Quectel Wireless Solutions Co Ltd | (Alt: EG912UGLAA-I05-SGNSA) RoHS : Compliant | 0 | |||
| EG915UECAC-N05-SNNSA/03A08-0130001300 | Quectel Wireless Solutions Co Ltd | FW EG915UECABR03A08M080130001300 (Alt: EG915UECAC-N05-SNNSA) RoHS : Compliant | 0 | |||
| EG915UEUDC-N05-SNNSA/06A04-0130001300 | Quectel Wireless Solutions Co Ltd | FW 06A04M080130001300 (Alt: EG915UEUDC-N05-SNNSA) RoHS : Compliant | 0 | |||
| EC21EUGA-512-SGNS/06A07-01.300.01.300 | Quectel Wireless Solutions Co Ltd | Cellular Module GSM LTEFDD WCDMA 33V to 43V 29mm x 32mm x 24mm (Alt: EC21EUGA-512-SGNS) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | CR1206F1300T2LF | Chip Technologies Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 50,000 | |
| CLT-130-02-S-D-A | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 485 | ||
| SSW-130-01-G-D | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 308 | ||
| DG89-A-06P-13-00AH | Degson Electronics Co Ltd | IN STOCK SHIP TODAY |
| 294 | ||
| 691321300008 | Wurth Elektronik | IN STOCK SHIP TODAY RoHS : Compliant |
| 220 | ||
| 760-013-001D | Raltron Electronics Corporation | IN STOCK SHIP TODAY | 100 | |||
| V42254-B1300-B640 | Siemens | IN STOCK SHIP TODAY |
| 22 | ||
| 9647-1513-000 | Applied Engineering Products (AEP) | IN STOCK SHIP TODAY |
| 20 | ||
| 1601-001-300 | MPI | IN STOCK SHIP TODAY | 6 | |||
| EP1300TS-20.000M | Ecliptek Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 6 | ||
| 4130-00-278-9740 | IN STOCK SHIP TODAY |
| 5 | |||
| 1300061373 | Molex | IN STOCK SHIP TODAY |
| 1 | ||
| 1300350057 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
| 60630-1300 | STI | IN STOCK SHIP TODAY |
| 1 | ||
| DDA130032 | CBI-electric Group | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | 1300 | Heyco | WP 187 CLEAR | 0 | ||
| 302130059935 | Essentra Components | SPACER 5X30 M2 | 0 | |||
| 3BP-P9013-00 | Acumnet / Camcar | 8-16 X 5/8 PHIL PAN HD | 0 | |||
| 3BT-P8313-00 | Acumnet / Camcar | M1.91-0.79 X 8 TXP PAN | 0 | |||
| 27QB1300600N | Essentra Components | BARBED RIVET, .438 HOLE, .437- | 0 | |||
| 60413-00604 | Avdel | KLAMP-TITE STR 316 PR AL BAPKT | 0 | |||
| 13001015 | Essentra Components | GASKETS, ADHESIVE D PROFILE, 1 | 0 | |||
| 1300GLMK | Sugatsune Kogyo Co Ltd | GLASS DOOR LOCK, MASTER0675 | 0 | |||
| 0362511300B | Essentra Components | UNSLOTTED HEX BOLT, 58-11 THRE | 0 | |||
| M1300-3005-ALMODL=70MM | RAF Electronic Hardware | 0 | ||||
| M2111-3005-N | RAF Electronic Hardware | 0 | ||||
| M2141-3005-AL-7 | RAF Electronic Hardware | 6 MM HEX MALE-FEMALE STANDOFFS | 0 | |||
| M2141-3005-B-12-PL | RAF Electronic Hardware | 0 | ||||
| PK-29-15-13-002 | Southco | 0 | ||||
| 1300-KEY | Sugatsune Kogyo Co Ltd | KEY FOR 1300GL | 0 | |||
![]() EBV Elektronik | VLMW1300-GS08 | Vishay Intertechnologies | LED Highbright White SMD 20 mA 315 V 180 mcd (Alt: VLMW1300-GS08) RoHS : Compliant | 45,000 | ||
| HCNR201-300E | Broadcom Limited | Optocoupler DCOUT DCIN Single 8Pin SMD WDIP Tube (Alt: HCNR201-300E) RoHS : Compliant | 16,590 | |||
| TCPT1300X01 | Vishay Intertechnologies | (Alt: TCPT1300X01) RoHS : Compliant | 10,000 | |||
| ACNV2601-300E | Broadcom Limited | Optocoupler Open CollectorOUT DCIN 1CH 10Pin SMD DIP TR (Alt: ACNV2601-300E) RoHS : Compliant | 3,500 | |||
| VLMG1300-GS08 | Vishay Intertechnologies | CHIPLED 0603 YELLOWGREEN HIGHBRIGHTe4 (Alt: VLMG1300-GS08) RoHS : Compliant | 3,000 | |||
| HCPL-2611-300E | Broadcom Limited | (Alt: HCPL-2611-300E) RoHS : Compliant | 2,400 | |||
| HCPL-2731-300E | Broadcom Limited | Optocoupler Darlington Output 2 Channel Surface Mount DIP 8 Pins 20 mA 375 kV 400 (Alt: HCPL-2731-300E) RoHS : Compliant | 1,950 | |||
| HCPL-2601-300E | Broadcom Limited | (Alt: HCPL-2601-300E) RoHS : Compliant | 1,450 | |||
| HCPL-2201-300E | Broadcom Limited | Optocoupler LogicOut TotemPole DCIN 1CH 8Pin PDIP SMD Tube (Alt: HCPL-2201-300E) RoHS : Compliant | 1,400 | |||
| HCPL-2631-300E | Broadcom Limited | (Alt: HCPL-2631-300E) RoHS : Compliant | 850 | |||
| HCPL-5761#300 | Broadcom Limited | Optocoupler ACDCIN 1CH Darlington With Base DCOUT 8Pin CDIP SMD (Alt: HCPL-5761#300) RoHS : Not Compliant | 250 | |||
| HCPL-4731-300E | Broadcom Limited | Optocoupler DCIN 2CH Darlington With Base DCOUT 8Pin PDIP SMD Tube (Alt: HCPL-4731-300E) RoHS : Compliant | 150 | |||
| HCPL-5701#300 | Broadcom Limited | Optocoupler DCIN 1CH Darlington With Base DCOUT 8Pin CDIP SMD (Alt: HCPL-5701#300) RoHS : Not Compliant | 80 | |||
| HCPL-2531-300E | Broadcom Limited | Optocoupler DCIN 2CH Transistor With Base DCOUT 8Pin PDIP SMD Tube (Alt: HCPL-2531-300E) RoHS : Compliant | 50 | |||
| HSSR-7111#300 | Broadcom Limited | (Alt: HSSR-7111#300) RoHS : Not Compliant | 26 | |||
![]() ECCO | 0580613000 | ITT Interconnect Solutions |
| 326 | ||
| 0110613000 | ITT Interconnect Solutions |
| 90 | |||
| 10-822813-000 | Amphenol Industrial Operations |
| 72 | |||
| 10-821713-000 | Amphenol Industrial Operations |
| 50 | |||
| 19013-0029 | Molex |
| 25 | |||
| 0190130029 | Molex | RoHS : Compliant |
| 25 | ||
| 1300980155 | Woodhead Molex |
| 4 | |||
| 1021013000 | ITT Interconnect Solutions |
| 3 | |||
| 102-1013-000 | ITT Interconnect Solutions |
| 3 | |||
| 057-3013-000 | ITT Interconnect Solutions |
| 2 | |||
![]() Flip Electronics | FJP13007TU | onsemi | Stock, Ship Today RoHS : Compliant |
| 6,000 | |
HCPL-2611#300![]() | Broadcom Limited | Stock, Ship Today RoHS : Not Compliant |
| 2,102 | ||
| HCPL-4731-300E | Broadcom Limited | Stock, Ship Today RoHS : Compliant |
| 1,450 | ||
2SK1300-E![]() | Renesas Electronics Corporation | Stock RoHS : Compliant | 1,161 | |||
| FJPF13009H2TU | onsemi | Stock, Ship Today RoHS : Compliant |
| 466 | ||
| KSE13009LTU | onsemi | Stock, Ship Today | 450 | |||
| NOIP1SN1300A-QTI | onsemi | Stock, Ship Today RoHS : Compliant |
| 420 | ||
HCPL-2201#300![]() | Broadcom Limited | Stock, Ship Today RoHS : Not Compliant |
| 290 | ||
| NOIP1FN1300A-QTI | onsemi | Stock, Ship Today RoHS : Compliant |
| 267 | ||
| NOIP2SE1300A-QDI | onsemi | Stock, Ship Today RoHS : Compliant |
| 61 | ||
| HCPL-2731#300 | Broadcom Limited | Stock, Ship Today RoHS : Not Compliant |
| 59 | ||
| NOIP1SE1300A-QDI | onsemi | Stock, Ship Today RoHS : Compliant |
| 59 | ||
| NOIL2SC1300A-GDC | onsemi | Stock RoHS : Compliant | 12 | |||
| PDB260W-1300-280 | Energy Recovery Products | Stock, Ship Today | 10 | |||
| CDB260W-1300-280-W | Energy Recovery Products | Stock, Ship Today | 9 | |||
![]() Neutron USA | 1.30.090.001/1300 | RAFI GmbH & Co Kg | Switch Actuators Pushbutton Illum. Red / Rot RoHS : Compliant |
| 50 | |
| 1SNA115686R1300 | TE Connectivity | Terminal Block Connector 2 Position Disconnect Gray 11 AWG RoHS : Compliant |
| 50 | ||
| 2682130000 | Weidmüller Interface GmbH & Co. KG | Modular Connectors / Ethernet Connectors IE-SW-EL05-5TX RoHS : Compliant |
| 50 | ||
| 5130.0001 | Schurter Electronic Components | AC Power Entry Modules SCREW-ON QC 20A STD. FRONT MNT. X2 RoHS : Compliant |
| 50 | ||
| 1.30.090.012/1300 | RAFI GmbH & Co Kg | Switch Actuators RAFIX 16F Pushbutton Illumin Red RoHS : Compliant |
| 8 | ||
| 1300 | Keystone Electronics Corp | Punches & Dies TOOLHOLDER BASE |
| 6 | ||
| 1879713000 | Weidmüller Interface GmbH & Co. KG | Sensor Cables / Actuator Cables SAIL-M12BG-12-30U RoHS : Compliant |
| 4 | ||
| SUPERTHERMAL-C128-05-00-1300-1300 | Boyd Corporation | Super Thermal C128 Gap Filler Interface140mmX140mmX3mm |
| 1 | ||
| 1300 | Anderson Power Products | Heavy Duty Power Connectors PP75 BLUE #6 AWG 6 AWG 75A CONT RoHS : Compliant |
| 0 | ||
| ATS-51300R-C1-R0 | Advanced Thermal Solutions Inc | Heat Sinks MAXIGRIP HTSNK 30 X 30 X 19.5 (MM) RoHS : Compliant |
| 0 | ||
| 1612130000 | Weidmüller Interface GmbH & Co. KG | Pluggable Terminal Blocks STV S 8 SS RoHS : Compliant |
| 0 | ||
| 130-0030-00-AO | AddOn Networks | MCAFEE 130-0030-00 COMP TAA SFP XCVR |
| 0 | ||
| 3.13.001.010/0000 | RAFI GmbH & Co Kg | Tactile Switch,RS 76 C,Full Travel Key Switch,Non-Illuminative,MOM,Solder |
| 0 | ||
| 32801-000201-300-RS | iEi Integration Corporation | 2.5" SATA HDD cable,2pin WAFER 2.0mm,for NANO-945GSE-N270 in EBC-2101,L:15cm (old:32000-114000-RS) |
| 0 | ||
| FS28-1300 | Triad Magnetics | Power Transformers 28VCT@1.3A 14V@2.6A DUAL PRIMARY 8 PIN RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W13007/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. QMA Male Right Angle to Reverse Polarity SMA Female Low Loss Cable Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly QMA male right angle to reverse polarity SMA female low loss cable using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The QMA male right angle to reverse polarity SMA female low loss cable using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom QMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle QMA cable connection on one end and a reverse polarity SMA cable connection on the other. Our low loss right angle QMA to reverse polarity SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W13007/HS can also be known as a low loss right angle QMA plug to reverse polarity SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13007/HS RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. QMA plug to reverse polarity SMA jack cable assembly PE3W13007/HS is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with right angle QMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13007/HS can also be used in the other direction and will be a reverse polarity SMA female to right angle QMA male cable assembly if the opposite connectivity is required. Low loss QMA right angle plug to SMA reverse polarity jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality QMA to SMA cable assembly for quick shipment worldwide. Variations of QMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal QMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 465 | ||
| PE3C2211-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to TNC Male Low Loss Cable 300 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly N male to TNC male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss type N to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C2211-300 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2211-300 RF cable has a PE jacket. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. Our type N male to TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3C2211-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2211-300 can also be used in the other direction and will be a TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 248 | ||
| PE3W12561-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. BNC Male to SMA Male Right Angle Low Loss Cable 300 Inch Length Using LMR-240-UF Coax., Radio frequency assembly BNC male to SMA male right angle low loss cable 300 inch length using LMR-240-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male right angle low loss cable 300 inch length using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a right angle SMA cable connection on the other. Our low loss BNC to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W12561-300 can also be known as a low loss BNC plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12561-300 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our BNC male to right angle SMA male cable has a maximum VSWR of 1.4:1. BNC plug to SMA plug cable assembly PE3W12561-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12561-300 can also be used in the other direction and will be a right angle SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 248 | ||
| PE3W10931-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. QMA Male Right Angle to SMA Male Low Loss Cable 300 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly QMA male right angle to SMA male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The QMA male right angle to SMA male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom QMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle QMA cable connection on one end and a SMA cable connection on the other. Our low loss right angle QMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W10931-300 can also be known as a low loss right angle QMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10931-300 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our right angle QMA male to SMA male cable has a maximum VSWR of 1.4:1. QMA plug to SMA plug cable assembly PE3W10931-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with right angle QMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W10931-300 can also be used in the other direction and will be a SMA male to right angle QMA male cable assembly if the opposite connectivity is required. Low loss QMA right angle plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality QMA to SMA cable assembly for quick shipment worldwide. Variations of QMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal QMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 100 | ||
| PE3W13007/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. QMA Male Right Angle to Reverse Polarity SMA Female Low Loss Cable 24 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly QMA male right angle to reverse polarity SMA female low loss cable 24 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The QMA male right angle to reverse polarity SMA female low loss cable 24 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom QMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle QMA cable connection on one end and a reverse polarity SMA cable connection on the other. Our low loss right angle QMA to reverse polarity SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W13007/HS-24 can also be known as a low loss right angle QMA plug to reverse polarity SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13007/HS-24 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. QMA plug to reverse polarity SMA jack cable assembly PE3W13007/HS-24 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with right angle QMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13007/HS-24 can also be used in the other direction and will be a reverse polarity SMA female to right angle QMA male cable assembly if the opposite connectivity is required. Low loss QMA right angle plug to SMA reverse polarity jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality QMA to SMA cable assembly for quick shipment worldwide. Variations of QMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal QMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 93 | ||
| PE3W13007/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. QMA Male Right Angle to Reverse Polarity SMA Female Low Loss Cable 60 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly QMA male right angle to reverse polarity SMA female low loss cable 60 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The QMA male right angle to reverse polarity SMA female low loss cable 60 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom QMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle QMA cable connection on one end and a reverse polarity SMA cable connection on the other. Our low loss right angle QMA to reverse polarity SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W13007/HS-60 can also be known as a low loss right angle QMA plug to reverse polarity SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13007/HS-60 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. QMA plug to reverse polarity SMA jack cable assembly PE3W13007/HS-60 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with right angle QMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13007/HS-60 can also be used in the other direction and will be a reverse polarity SMA female to right angle QMA male cable assembly if the opposite connectivity is required. Low loss QMA right angle plug to SMA reverse polarity jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality QMA to SMA cable assembly for quick shipment worldwide. Variations of QMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal QMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 93 | ||
| PE3W13007/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. QMA Male Right Angle to Reverse Polarity SMA Female Low Loss Cable 12 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly QMA male right angle to reverse polarity SMA female low loss cable 12 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The QMA male right angle to reverse polarity SMA female low loss cable 12 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom QMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle QMA cable connection on one end and a reverse polarity SMA cable connection on the other. Our low loss right angle QMA to reverse polarity SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W13007/HS-12 can also be known as a low loss right angle QMA plug to reverse polarity SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13007/HS-12 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. QMA plug to reverse polarity SMA jack cable assembly PE3W13007/HS-12 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with right angle QMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13007/HS-12 can also be used in the other direction and will be a reverse polarity SMA female to right angle QMA male cable assembly if the opposite connectivity is required. Low loss QMA right angle plug to SMA reverse polarity jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality QMA to SMA cable assembly for quick shipment worldwide. Variations of QMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal QMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 93 | ||
| PE3W13008 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. MMCX Plug to SMA Male Cable Using RG316-DS Coax. PE3W13008 is a MMCX plug to SMA male cable using RG316-DS coax. This Pasternack MMCX plug to SMA male cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. Our plug MMCX to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13008 MMCX plug to SMA male cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE3W13004 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. 7/16 DIN Female Bulkhead to 7/16 DIN Female Bulkhead Cable Using RG58 Coax. PE3W13004 is a 7/16 DIN female bulkhead to 7/16 DIN female bulkhead cable using RG58 coax. This Pasternack 7/16 DIN female bulkhead to 7/16 DIN female bulkhead cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our female 7/16 DIN bulkhead to female 7/16 DIN bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13004 7/16 DIN female bulkhead to 7/16 DIN female bulkhead cable assembly is constructed with RG58 coax. | 0 | |||
| PE91300 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 18 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Passivated Stainless Steel, Connector Mount Method 2: None, Connector Body Material 2: Passivated Stainless Steel. SMA Female to Mini SMP Male Smooth Bore Adapter. SMA adapter PE91300 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our SMA to Mini SMP adapter is a between series coaxial adapter design. This 50 Ohm SMA adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 18 GHz. SMA female to Mini SMP male adapter is one of the many RF components that ship same day as they are ordered. PE91300 female SMA to male Mini SMP adapter has a straight body. This Pasternack straight SMA coax adapter is a in-line RF adapter. Our female SMA to male Mini SMP adapter PE91300 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This SMA to Mini SMP radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 0 | ||
| PE3W13005LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Cable Using LMR-600-UF Coax, LF Solder. PE3W13005LF is a 7/16 DIN male to 7/16 DIN male cable using LMR-600-UF coax. This Pasternack 7/16 DIN male to 7/16 DIN male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 7/16 DIN to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13005LF 7/16 DIN male to 7/16 DIN male cable assembly is constructed with LMR-600-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13006 | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm F Male to 75 Ohm BNC Female Bulkhead Cable Using 75 Ohm RG179 Coax. PE3W13006 is a F male to BNC female bulkhead cable using RG179 coax. This Pasternack F male to BNC female bulkhead cable assembly uses a 75 Ohm F for connector 1 and a 75 Ohm BNC for connector 2. Our male F to female BNC bulkhead cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W13006 F male to BNC female bulkhead cable assembly is constructed with RG179 coax. | 0 | |||
| PE3W11300LF | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. MMCX Jack to SMA Male Cable Using RG174 Coax, LF Solder. PE3W11300LF is a MMCX jack to SMA male cable using RG174 coax. This Pasternack MMCX jack to SMA male cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. Our jack MMCX to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11300LF MMCX jack to SMA male cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W13005 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Low Loss Cable Using LMR-600-UF Coax With Times Microwave Components., Radio frequency assembly 7/16 DIN male to 7/16 DIN male low loss cable using LMR-600-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male to 7/16 DIN male low loss cable using LMR-600-UF coax with Times Microwave components, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low loss 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3W13005 can also be known as a low loss 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3W13005 is built with LMR-600-UF which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male low loss cable using LMR-600-UF coax with Times Microwave components. | 0 | |||
| PE3C1300 | Pasternack Enterprises | 0 | ||||
![]() Venkel Ltd. | C0505HQN101-300GNE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;100V;30pF;�2% RoHS : Compliant | 0 | ||
| C0805HQN251-300GNP | VENKEL LTD | High-Q NP0 Capacitor;0805;HQN;250V;30pF;�2% RoHS : Compliant | 0 | |||
| TFCR0805-10W-C-1300FT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;130R;�1% RoHS : Compliant | 0 | |||
| CR0805-8W-1300DT | VENKEL LTD | Chip Resistor;0805;1/8W;130R;�0.5% RoHS : Compliant | 0 | |||
| MELFC0207-XE-1300DT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�25PPM;130R;�0.5% RoHS : Compliant | 0 | |||
| HPTF2010-UP-1300BT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�5PPM;130R;�0.1% RoHS : Compliant | 0 | |||
| HPTF2512-WC-1300DT | VENKEL LTD | High Power Thin Film CR;2512;3/4W;�50PPM;130R;�0.5% RoHS : Compliant | 0 | |||
| HPTF1206-TN-1300CT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�10PPM;130R;�0.25% RoHS : Compliant | 0 | |||
| HPTF1210-UP-1300UT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�5PPM;130R;�0.01% RoHS : Compliant | 0 | |||
| TFCR0603-10W-K-1300BT | VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;130R;�0.1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-K-1300DT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�100PPM;130R;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-4W-E-1300BT-1K | VENKEL LTD | Thin Film CR;1206;1/4W;�25PPM;130R;�0.1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-C-1300BT | VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;130R;�0.1% RoHS : Compliant | 0 | |||
| PWCR0603-TK-1300DT | VENKEL LTD | Pulse Withstanding CR;0603;1/4W;�100PPM;130R;�0.5% RoHS : Compliant | 0 | |||
| MEHF0204-TC-1300GT | VENKEL LTD | High Frequency MELF;0204;1/4W;�50PPM;130R�2% RoHS : Not Compliant | 0 | |||
![]() Vyrian | V1B2B80B-AKC13-000 | Carling Technologies | Rocker Switch, SPST, On-off, Maintained, 15A, 28VDC, Quick Connect Terminal, Rocker Actuator, Panel Mount RoHS : Compliant | 14,247 | ||
ST13003DN![]() | STMicroelectronics | Power Bipolar Transistor, 1A I(C), 400V V(BR)CEO, 1-Element, NPN, Silicon, TO-126, Plastic/Epoxy, 3 Pin RoHS : Compliant | 12,959 | |||
| VD51A101-1EZ13-000 | Carling Technologies | Rocker Switch, DPDT, On-on, Maintained, Quick Connect Terminal, Rocker Actuator, Panel Mount RoHS : Compliant | 11,511 | |||
| YK6612813000G | Amphenol Corporation | Barrier Strip Terminal Block, 15A, 2 Row(s), 2 Deck(s) RoHS : Compliant | 11,184 | |||
| VT1300MFQX | Analog Devices Inc | 10,663 | ||||
| TSB41300 | Littelfuse Inc | Solid State Module | 10,518 | |||
| VT1300MFQ | Analog Devices Inc | 10,261 | ||||
| TPS61300YFF | Texas Instruments | LED Driver, 2-Segment | 9,194 | |||
TRC1300DR![]() | Texas Instruments | Support Circuit, RF, CMOS, PDSO14 | 7,579 | |||
ST13003N![]() | STMicroelectronics | Power Bipolar Transistor, 1A I(C), 400V V(BR)CEO, 1-Element, NPN, Silicon, TO-126, Plastic/Epoxy, 3 Pin RoHS : Compliant | 7,249 | |||
STH13009![]() | STMicroelectronics | Power Bipolar Transistor, 12A I(C), 400V V(BR)CEO, 1-Element, NPN, Silicon, TO-220AB, Plastic/Epoxy, 3 Pin RoHS : Compliant | 6,625 | |||
ST13007DFP![]() | STMicroelectronics | Power Bipolar Transistor, 8A I(C), 400V V(BR)CEO, 1-Element, NPN, Silicon, TO-220AB, Plastic/Epoxy, 3 Pin RoHS : Compliant | 5,519 | |||
| TSA141300 | Littelfuse Inc | Solid State Module | 4,468 | |||
TPS61300YFFR![]() | Texas Instruments | LED Driver, 2-Segment RoHS : Compliant | 4,051 | |||
| 1300130076 | Molex | Circular Connector RoHS : Compliant | 555 | |||
![]() Waytek, Inc. | 19130-0045 | Molex | 16-14 GA #8 Spade Terminal Blue Vinyl Insulated |
| 32,818 | |
| 19130-0005 | Molex | The Molex 19130-0005 InsulKrimp block spade terminal fits 22-18 Ga. wire and a #6 stud. Red vinyl insulation protects the tin-plated copper terminal, and a butted-seam barrel adds wire grip. Its narrow block-fork profile is well suited to barrier strips and compact terminal blocks. |
| 17,855 | ||
| 19130-0044 | Molex | 16-14 GA #6 Spade Terminal Insulated Blue Vinyl |
| 10,586 | ||
| 19130-0046 | Molex | 16-14 GA #10 Spade Terminal Blue Insulated Vinyl |
| 10,292 | ||
| 19130-0006 | Molex | The Molex 19130-0006 InsulKrimp block spade terminal fits 22-18 Ga. wire and a #8 stud. It combines red vinyl insulation, tin-plated copper construction, and a butted-seam barrel for secure crimping. The narrow fork profile helps the terminal fit between barriers on compact terminal blocks. |
| 8,911 | ||
| 19130-04M | Eaton Electronics | 30 AMP MAXI Circuit Breaker ATC Blade Buss 19130-04M |
| 391 | ||
| 22130-000 | Eaton Electronics | 30 AMP Circuit Breaker Type 1 ATC Blade Bussmann 22130-000 |
| 123 | ||
| MG-1300 | Advanced Cable Ties Inc | The ACT MG-1300 is a cable tie removal tool designed to safely cut and remove cable ties without damaging bundled wires or components. Compatible with 18250 lb. cable ties, it features dual safety guards that slide behind the strap to protect cables during removal. Built with heat-treated alloy steel blades and an ergonomic cushion grip, it provides durable, controlled cutting for automotive, electrical, and industrial applications. |
| 51 | ||
| 8710-1300B | Egis Mobile Electric | XD Series - Programmable ACR |
| 47 | ||
| 3130-000N | QuickCable Corporation | 3/0 GA Crimpable Battery Lug Negative, Right Elbow |
| 46 | ||
| 6001-3001B | Egis Mobile Electric | TH Series Time Delay Relay 200A, OEM Bulk Pack |
| 0 | ||
| 21130-00 | Eaton Electronics | 30 AMP Mini Circuit Breaker Type I Bussmann 21130-00 CB211-30 |
| 0 | ||
![]() Win Source Electronics | SI1300BDL-T1-E3 | Vishay Huntington | Trans MOSFET N-CH 20V 0.4A 3-Pin SC-70 T/R / MOSFET N-CH 20V 400MA SOT323-3 |
| 119,838 | |
| 61300511121 | Wurth Elektronik | RoHS : Compliant |
| 32,000 | ||
| LSHM-130-04.0-L-DV-A-S-K-TR | Samtec Inc | RoHS : Compliant |
| 30,000 | ||
| 61300611121 | Wurth Elektronik | CONN HEADER VERT 6POS 2.54MM RoHS : Compliant |
| 22,816 | ||
| 61300211121 | Wurth Elektronik | RoHS : Compliant |
| 17,235 | ||
| 61300311121 | Wurth Elektronik | CONN HEADER VERT 3POS 2.54MM RoHS : Compliant |
| 17,032 | ||
| 61300411121 | Wurth Elektronik | RoHS : Compliant |
| 15,742 | ||
| ADIN1300BCP | Analog Devices Inc | 10/100/1000 Mbps Industrial Ethernet PHY |
| 10,000 | ||
AMC1300BDWV![]() | Texas Instruments | IC ISOLATION 8SOIC RoHS : Compliant |
| 10,000 | ||
| DXT13003DG-13 | Diodes Incorporated | TRANS NPN 450V 1.3A SOT223-3 / Bipolar (BJT) Transistor NPN 450 V 1.3 A 4MHz 700 mW Surface Mount SOT-223-3 RoHS : Compliant |
| 7,632 | ||
| ADIN1300CCPZ-R7 | Analog Devices Inc | IC TXRX FULL/HALF 4/4 40LFCSP / 4/4 Transceiver Full, Half IEEE 802.3 40-LFCSP-WQ (6x6) RoHS : Compliant |
| 5,750 | ||
| LCMXO3LF-1300C-5BG256I | Lattice Semiconductor Corporation | RoHS : Compliant |
| 2,999 | ||
| FI-RE41S-VF-R1300 | JAE Electronics | CONN RCPT 0.5MM 41 POS / Conn High Speed Fine Pitch Connector RCP 41 POS 0.5mm Solder ST SMD T/R |
| 1,089 | ||
ADUM1300BRWZ![]() | Analog Devices Inc | DGTL ISO 2.5KV GEN PURP 16SOIC RoHS : Compliant |
| 1,000 | ||
| HD6413006F20V | Renesas Electronics Corporation |
| 1,000 | |||
![]() Wuhan P&S | VLMTG1300-GS08 | Vishay Intertechnologies | CHIPLED (0603) TRUEGREEN HIGHBRIGHT -E4 RoHS : Compliant |
| 18,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |