130-09SC-R Price, Distributor, Stock

Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. NEX10 Female Bulkhead to NEX10 Female Bulkhead Low PIM Cable 36 Inch Length Using SPO-250 Coax., Radio frequency assembly NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 36 inch length using SPO-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 36 inch length using SPO-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 bulkhead cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has female gender on end 1 and female on end 2. PE3W13069-36 can also be known as a low PIM NEX10 jack to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W13069-36 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 jack to NEX10 jack cable assembly PE3W13069-36 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 jack bulkhead to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements.

1 : $90.99
25 : $86.44
50 : $81.89
100 : $78.25

PE1V13013

Pasternack Enterprises

1 : $351.99
10 : $337.91
25 : $323.83

PE7581-30

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 30 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.5:1, Input Power, Max (CW): 100 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 100 Watts Up to 10 GHz. PE7581-30 is a 30 dB fixed attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7581-30 fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 100 Watts. This attenuator has a maximum VSWR of 1.5:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 30 dB. The Pasternack PE7581-30 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 30 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7581-30 will ship the same business day as purchased from Pasternack’s production facility. This 30 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $605.0
5 : $592.9
10 : $580.8
25 : $568.7

PE91306

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 18 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Passivated Stainless Steel, Connector Mount Method 2: None, Connector Body Material 2: Passivated Stainless Steel. SMA Female to SMP Male Limited Detent Adapter. SMA adapter PE91306 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our SMA to SMP adapter is a between series coaxial adapter design. This 50 Ohm SMA adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 18 GHz. SMA female to SMP male adapter is one of the many RF components that ship same day as they are ordered. PE91306 female SMA to male SMP adapter has a straight body. This Pasternack straight SMA coax adapter is a in-line RF adapter. Our female SMA to male SMP adapter PE91306 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This SMA to SMP radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $133.99
25 : $127.29
50 : $120.59
100 : $115.23

PE36130LF-72

Pasternack Enterprises

Key Specifications, Connector Series 1: MC-Card, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MC-Card, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 72 inches. MC-Card Plug Right Angle to MC-Card Plug Right Angle Cable 72 Inch Length Using RG316 Coax, RoHS., Radio frequency assembly MC-Card plug right angle to MC-Card plug right angle cable 72 inch length using RG316 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MC-Card plug right angle to MC-Card plug right angle cable 72 inch length using RG316 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MC-Card to MC-Card cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MC-Card cable connection on one end and right angle MC-Card cable connection on the other. Our right angle MC-Card to right angle MC-Card cable assemblies have a plug gender on end 1 and plug on end 2. This MC-Card to MC-Card cable is a plug to plug coax assembly, PE36130LF-72, can also be known as a right angle MC-Card male to right angle MC-Card male cable assembly and will be shipped same-day as it is purchased. MC-Card male to MC-Card male cable assembly PE36130LF-72 is built with RG316 which is a flexible coax type. The Pasternack flexible MC-Card cable assembly is manufactured with right angle MC-Card to right angle MC-Card cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MC-Card right angle plug to MC-Card right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MC-Card right angle male to MC-Card right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MC-Card to MC-Card cable assembly for quick shipment worldwide. Variations of MC-Card cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MC-Card plug right angle to MC-Card plug right angle cable 72 inch length using RG316 coax, RoHS.

1 : $91.99
25 : $87.39
50 : $82.79
100 : $79.11

PE3C5130

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Male to 75 Ohm MCX Plug Cable Using 75 Ohm RG187 Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm MCX plug cable using 75 Ohm RG187 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm MCX plug cable using 75 Ohm RG187 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and MCX cable connection on the other. Our BNC to MCX cable assemblies have a male gender on end 1 and plug on end 2. This BNC to MCX cable is a male to plug coax assembly, PE3C5130, can also be known as a BNC plug to MCX male cable assembly and will be shipped same-day as it is purchased. BNC plug to MCX male cable assembly PE3C5130 is built with RG187 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to MCX cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to MCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5130 can also be used in the other direction and will be MCX plug to BNC male cable assembly if the opposite connectivity is required. BNC plug to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to MCX cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm MCX plug cable using 75 Ohm RG187 coax.

PE3W13021LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to SMA Male Cable Using PE-SR405FLJ Coax with HeatShrink, LF Solder. PE3W13021LF/HS is a BMA jack to SMA male cable using PE-SR405FLJ coax. This Pasternack BMA jack to SMA male cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm SMA for connector 2. Our jack BMA to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W13021LF/HS BMA jack to SMA male cable assembly is constructed with PE-SR405FLJ coax.

PE3W13027

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Male to SMP Female Cable Using RG405 Coax., Radio frequency assembly SMA male to SMP female cable using RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable using RG405 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMP cable connection on the other. Our SMA to SMP cable assemblies have a male gender on end 1 and female on end 2. PE3W13027 can also be known as a SMA plug to SMP jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMP jack cable assembly PE3W13027 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13027 can also be used in the other direction and will be SMP female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMP female cable using RG405 coax.

PE3W13046LF/HS-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Female Bulkhead to BNC Male Right Angle Low Loss Cable Using LMR-100 Coax with HeatShrink, LF Solder in 60 Inch., Radio frequency assembly TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 60 inch from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 60 inch, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC bulkhead cable connection on one end and right angle BNC cable connection on the other. Our low loss TNC to right angle BNC cable assemblies have a female gender on end 1 and male on end 2. This TNC to BNC cable is a female to male coax assembly, PE3W13046LF/HS-60, can also be known as a low loss TNC jack to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. TNC jack to BNC plug cable assembly PE3W13046LF/HS-60 is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency TNC female bulkhead to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13046LF/HS-60 can also be used in the other direction and will be right angle BNC male to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to BNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder in 60 inch.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

PE3W13072

Pasternack Enterprises

Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm.

PE3W13013LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Cable Using LMR-100A-UF Coax, LF Solder. PE3W13013LF is a SMA male right angle to SMA female cable using LMR-100A-UF coax. This Pasternack SMA male right angle to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13013LF SMA male right angle to SMA female cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W13022-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. Fire Rated TNC Male Right Angle to TNC Female Right Angle Bulkhead Low Loss Cable 72 Inch Length Using LMR-200-FR Coax., Radio frequency assembly fire rated TNC male right angle to TNC female right angle bulkhead low loss cable 72 inch length using LMR-200-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Fire rated TNC male right angle to TNC female right angle bulkhead low loss cable 72 inch length using LMR-200-FR coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle TNC bulkhead cable connection on the other. Our low loss right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and female on end 2. PE3W13022-72 can also be known as a low loss right angle TNC plug to right angle TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE3W13022-72 is built with LMR-200-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to TNC right angle female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13022-72 can also be used in the other direction and will be right angle TNC female bulkhead to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC right angle jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated TNC male right angle to TNC female right angle bulkhead low loss cable 72 inch length using LMR-200-FR coax.

1 : $129.99
25 : $123.49
50 : $116.99
100 : $111.79

PE3W13026

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. Bordeaux FAKRA Jack to FAKRA Plug Cable Using PE-C100-LSZH Coax. PE3W13026 is a FAKRA jack to FAKRA plug cable using PE-C100-LSZH coax. This Pasternack FAKRA jack to FAKRA plug cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. Our jack FAKRA to plug FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13026 FAKRA jack to FAKRA plug cable assembly is constructed with PE-C100-LSZH coax.

PE3W13071

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SSMC Plug to Push-On SMP Female Right Angle Cable Using RG316 Coax. PE3W13071 is a SSMC plug to SMP female right angle cable using RG316 coax. This Pasternack SSMC plug to SMP female right angle cable assembly uses a 50 Ohm SSMC for connector 1 and a 50 Ohm SMP for connector 2. SSMC to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SSMC to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13071 SSMC plug to SMP female right angle cable assembly is constructed with RG316 coax.

PE3W17130

Pasternack Enterprises

Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. NEX10 Male to 7/16 DIN Male Cable Using TFT-5G-402 Coax. PE3W17130 is a NEX10 male to 7/16 DIN male cable using TFT-5G-402 coax. This Pasternack NEX10 male to 7/16 DIN male cable assembly uses a 50 Ohm NEX10 for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male NEX10 to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17130 NEX10 male to 7/16 DIN male cable assembly is constructed with TFT-5G-402 coax.

Teledyne HiRel

7901301CA

Teledyne HiRel

NAND GATE, TRIPLE 3-INPUT

5962-8871302XA

Teledyne HiRel

PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT
RoHS : Not Compliant

5962-8871307SA

Teledyne HiRel

PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT
RoHS : Not Compliant

5962-8871306SA

Teledyne HiRel

PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT
RoHS : Not Compliant

5962-9091301MXA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, REGISTERED, 65 NS ACCESS
RoHS : Not Compliant

5962-8871307XA

Teledyne HiRel

PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT
RoHS : Not Compliant

5962-8951302SA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8871303XA

Teledyne HiRel

PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT
RoHS : Not Compliant

5962-9091302MYA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, REGISTERED, 55 NS ACCESS
RoHS : Not Compliant

5962-8761301DA

Teledyne HiRel

NAND GATE, DUAL 4-INPUT
RoHS : Not Compliant

5962-8761301CA

Teledyne HiRel

NAND GATE, DUAL 4-INPUT
RoHS : Not Compliant

5962-9091301MYA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, REGISTERED, 65 NS ACCESS
RoHS : Not Compliant

5962-8951302RA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8871302SA

Teledyne HiRel

PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT
RoHS : Not Compliant

5962-89513022A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

Venkel Ltd.

TFCR0603-10W-E-1301BT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�25PPM;1.3K;�0.1%
RoHS : Compliant

161,000

SWCR2010-YL-130KT

VENKEL LTD

Surge Withstanding CR;2010;1.25W;�200PPM;13R;�10%
RoHS : Compliant

SBA130CS-EVL

VENKEL LTD

Rectifier;SOD-323;30V;1A
RoHS : Not Compliant

PWCR0603-QK-1301FT

VENKEL LTD

Pulse Withstanding CR;0603;1/10W;�100PPM;1.3K;�1%
RoHS : Compliant

PWCR0603-TL-1130DT

VENKEL LTD

Pulse Withstanding CR;0603;1/4W;�200PPM;113R;�0.5%
RoHS : Compliant

PWCR0603-UK-1303DT

VENKEL LTD

Pulse Withstanding CR;0603;1/3W;�100PPM;130K;�0.5%
RoHS : Compliant

PWCR1206-UK-1301DT

VENKEL LTD

Pulse Withstanding CR;1206;1/3W;�100PPM;1.3K;�0.5%
RoHS : Compliant

PWCR1210-VK-1130FT

VENKEL LTD

Pulse Withstanding CR;1210;1/2W;�100PPM;113R;�1%
RoHS : Compliant

PWCR2010-WK-1305FT

VENKEL LTD

Pulse Withstanding CR;2010;3/4W;�100PPM;13M;�1%
RoHS : Compliant

TFCR0402-16W-C-1302FT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;13K;�1%
RoHS : Compliant

TFCR0402-16W-C-1303DT

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;130K ;�0.5%
RoHS : Compliant

TFCR0402-16W-E-2130BT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�25PPM;213R;�0.1%
RoHS : Compliant

TFCR0402-16W-K-1301CT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�100PPM;1.3K;�0.25%
RoHS : Compliant

TFCR0603-10W-C-2130CT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;213R;�0.25%
RoHS : Compliant

TFCR0603-10W-K-1130DT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�100PPM;113R;�0.5%
RoHS : Compliant

Waytek, Inc.

19130-0005

Molex

22-18 GA #6 Spade Terminal Red Vinyl Insulated 30110 30553 30753 30523 30113

100 : $0.1649
200 : $0.1493
500 : $0.1332
1,000 : $0.121
5,000 : $0.1155

19,387

58130802

Southwire Company LLC

22/3 Shielded Cable Gray PVC Blk Rd Natrl Tinned Conductors -20C to 80C UL Type CM

500 : $0.6848
5,000 : $0.4747

10,000

19073-0130

Molex

12-10 GA # 6 Ring Terminal Yellow Nylon w/ Brass Sleeve NARROW WIDTH

25 : $0.437
50 : $0.4043
100 : $0.3809
200 : $0.3716
500 : $0.3482
1,000 : $0.3342

8,652

19193-0130

Molex

12-10 GA #8 Ring Terminal Non-Insulated Brazed
RoHS : Compliant

50 : $0.181
200 : $0.1714
500 : $0.1595
1,000 : $0.1531

4,814

19130-0044

Molex

16-14 GA #6 Spade Terminal Insulated Blue Vinyl

100 : $0.2303
200 : $0.2221
500 : $0.2057
1,000 : $0.1848
5,000 : $0.1785

3,886

CHV1309Z2

KMC Controls Inc

3/4" Vinyl Coated Half Clamp 5/8" Wide

20 : $1.0099
50 : $0.8999
100 : $0.8166
200 : $0.7899
500 : $0.7633
1,000 : $0.7333

1,029

643201301

Molex

CMC Wr Cap 48Ckt Mat Seal

10 : $0.4707
200 : $0.4407
500 : $0.4107
1,000 : $0.4007

922

19130-04M

Eaton Electronics

30 AMP MAXI Circuit Breaker ATC Blade Buss 19130-04M

1 : $5.68
50 : $4.74
100 : $4.12
200 : $3.88
500 : $3.71

472

22130-000

Eaton Electronics

30 AMP Circuit Breaker Type 1 ATC Blade Bussmann 22130-000

1 : $4.5181
10 : $4.0887
50 : $3.7397
100 : $3.2841
200 : $3.0754
500 : $2.9425

150

MG-1300

Advanced Cable Ties Inc

The ACT MG-1300 is a cable tie removal tool designed to safely cut and remove cable ties without damaging bundled wires or components. Compatible with 18250 lb. cable ties, it features dual safety guards that slide behind the strap to protect cables during removal. Built with heat-treated alloy steel blades and an ergonomic cushion grip, it provides durable, controlled cutting for automotive, electrical, and industrial applications.

1 : $45.49
10 : $42.7

3130-000N

QuickCable Corporation

3/0 GA Crimpable Battery Lug Negative, Right Elbow

1 : $8.93
10 : $7.95
50 : $7.31
100 : $7.09
200 : $6.86
500 : $6.67

7000002130

Hook Black 50 YDS Spool 3M # SJ-3526

1 : $272.37
5 : $262.28
10 : $253.87
25 : $240.42

1309G3

Anderson Power Products

Crimping Tool For Anderson CONTACTS 261G2-LPBK 37746

1 : $351.55
10 : $329.87

21306-P5

FTZ Industries

FTZ Industries 21306-6 extra heavy-duty heat shrink kit refill is red adhesive-lined tubing with a .750" size for rugged cable, splice, and termination protection. Its thick-wall construction supports strong moisture sealing and abrasion resistance, and this refill pack includes 5 pieces for restocking heat-shrink kits.

1 : $2.06
10 : $1.77
20 : $1.68
50 : $1.53

13023A

Eaton Electronics

Sure Power 13023A Mult Battery Isolator 130A 1 INP 2 Battery

1 : $157.38
5 : $146.89
10 : $138.15
25 : $131.16
50 : $125.91

Win Source Electronics

AP1302CSSL00SMGA0-DR

onsemi

IMAGE SENSOR
RoHS : Compliant

58 : $5.227
43 : $5.8301
34 : $6.0311
25 : $6.2321
16 : $6.4332
7 : $7.8404

90,909

TMUX1309QDYYRQ1

Texas Instruments

AUTOMOTIVE, 2-CHANNEL, 4:1 GENER / 2 Circuit IC Switch 4:1 195Ohm 16-SOT-23-THIN
RoHS : Compliant

2,220 : $0.1353
1,660 : $0.1509
1,285 : $0.1561
930 : $0.1613
605 : $0.1665
250 : $0.2029

83,739

ST13003-K

STMicroelectronics

Trans GP BJT NPN 400V 1.5A 40000mW 3-Pin(3+Tab) SOT-32 Bag / TRANS NPN 400V 1.5A SOT-32
RoHS : Compliant

1,455 : $0.2313
1,090 : $0.2579
840 : $0.2669
610 : $0.2757
395 : $0.2847
165 : $0.3469

50,000

MCP73113-06SI/MF

Microchip Technology Inc

IC CONTROLLER LI-ION 4.2V 10-DFN
RoHS : Compliant

177 : $2.194
133 : $2.4475
103 : $2.5315
75 : $2.6156
48 : $2.6998
20 : $3.2909

44,000

22-01-3037

Molex

22-01-3037 Molex Headers & Wire Housings HSG 3P W/RAMP/RIBS datasheet, inventory, & pricing.
RoHS : Compliant

8,475 : $0.0354
6,330 : $0.0395
4,890 : $0.0409
3,555 : $0.0422
2,295 : $0.0436
945 : $0.0531

40,000

DS1306E+

Maxim Integrated Products

IC RTC CLK/CALENDAR SPI 20-TSSOP / Real Time Clock Serial 96byte Clock/Calendar/Alarm 20-Pin TSSOP
RoHS : Compliant

39 : $8.7666
29 : $9.7782
23 : $10.1153
17 : $10.4525
11 : $10.7896
5 : $13.1498

25,000

LP2981-30DBVRG4

Texas Instruments

IC REG LDO 3V 0.1A SOT23-5
RoHS : Compliant

615 : $0.4888
460 : $0.5452
355 : $0.564
260 : $0.5828
170 : $0.6016
70 : $0.7331

19,470

PE613050A-Z

pSemi

UltraCMOS SP4T Tuning Control Switch, 100-3000 MHz
RoHS : Compliant

250 : $1.2114
200 : $1.2607
155 : $1.3099
110 : $1.4084
70 : $1.4576
35 : $1.5561

18,960

MBRS130T3G

onsemi

DIODE SCHOTTKY 30V 1A SMB
RoHS : Compliant

910 : $0.3704
680 : $0.4131
525 : $0.4273
385 : $0.4416
250 : $0.4558
105 : $0.5555

18,000

DS1308U-33+

Maxim Integrated Products

IC RTC CLK/CALENDAR I2C 8-UMAX
RoHS : Compliant

101 : $2.9953
75 : $3.3409
58 : $3.4561
43 : $3.5713
28 : $3.6865
12 : $4.4929

12,000

DS1302Z+T

Maxim Integrated Products

IC RTC CLK/CALENDAR SER 8-SOIC

425 : $0.7082
340 : $0.737
265 : $0.7658
185 : $0.8234
120 : $0.8522
55 : $0.9097

11,150

THS4130IDGNRG4

Texas Instruments

HIGH-SPEED, LOW-NOISE, FULLY-DIFFERENTIAL I/O AMPLIFIERS
RoHS : Compliant

16 : $21.7314
12 : $24.2388
9 : $25.0747
7 : $25.9105
5 : $26.7463
2 : $32.597

9,160

THS4130ID

Texas Instruments

HIGH SPEED LOW NOISE, FULLY DIFFERENTIAL I/O AMPLIFIERS | IC OPAMP DIFF 1 CIRCUIT 8SOIC
RoHS : Compliant

77 : $4.3811
58 : $4.8866
45 : $5.0551
33 : $5.2236
21 : $5.3921
9 : $6.5716

8,269

DS1307+

Maxim Integrated Products

IC RTC CLK/CALENDAR I2C 8-DIP
RoHS : Compliant

147 : $2.0454
110 : $2.2814
85 : $2.3601
62 : $2.4387
40 : $2.5174
17 : $3.0681

5,000

TMC2130-TA

Analog Devices Inc

STEPPER MOTOR DRIVER IC, SPI, ST
RoHS : Compliant

6 : $55.9091
5 : $58.1819
4 : $60.4546
3 : $65.0001
2 : $67.2728
1 : $71.8182

3,892

Wuhan P&S

AR0130CSSM00SPCA0-DRBR

onsemi

"AR0130CSSM00SPCA0-DRBR",Image Sensor
RoHS : Compliant

1 : $20.08
100 : $13.94
500 : $11.57
1,000 : $10.67

4,800

AF0130CSSM30SMKA1-CP2

onsemi

1MP?1/3?CIS?SO
RoHS : Compliant

1 : $291.02
100 : $185.76
500 : $153.17
1,000 : $140.82

800

STL130N6F7

STMicroelectronics

60V, 3.5m��, 130A, N-Channel Power MOSFET
RoHS : Compliant

1 : $0.77
100 : $0.77
500 : $0.77
1,000 : $0.77

130-09SC-R Distributor

Link URL