Electronic Components Datasheet Search
  English  ▼
ALLDATASHEET.COM

X  



103-4-RV Distributor

DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

Pasternack Enterprises US
PE3C10375

Pasternack Enterprises Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Low Loss Cable Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and right angle a type N cable connection on the other. Our low loss a type N to right angle a type N cable assembly has male gender on end 1 and male on end 2. PE3C10375 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10375 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. Type N plug to type N plug cable assembly PE3C10375 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10375 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.
811
PE3C10375-12

Pasternack Enterprises Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Right Angle Low Loss Cable 12 Inch Length Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 12 inch length using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 12 inch length using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and right angle a type N cable connection on the other. Our low loss a type N to right angle a type N cable assembly has male gender on end 1 and male on end 2. PE3C10375-12 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10375-12 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. Type N plug to type N plug cable assembly PE3C10375-12 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10375-12 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.
1 : $111.99
25 : $107.51
50 : $104.15
100 : $101.91
254
PE3W09410-300

Pasternack Enterprises Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to TNC Male Right Angle Low Loss Cable 300 Inch Length Using LMR-400-UF Coax., Radio frequency assembly N male to TNC male right angle low loss cable 300 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male right angle low loss cable 300 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle TNC cable connection on the other. Our low loss type N to right angle TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W09410-300 can also be known as a low loss type N plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W09410-300 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3W09410-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W09410-300 can also be used in the other direction and will be a right angle TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $147.99
10 : $145.03
25 : $142.07
100 : $139.11
17
PE3C10354-24

Pasternack Enterprises Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 7/16 DIN Male to N Male Low PIM Cable 24 Inch Length Using TCOM-400 Coax With Times Microwave Components., Radio frequency assembly 7/16 DIN male to N male low PIM cable 24 inch length using TCOM-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to N male low PIM cable 24 inch length using TCOM-400 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM a 7/16 DIN to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10354-24 can also be known as a low PIM 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10354-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. 7/16 DIN plug to type N plug cable assembly PE3C10354-24 is built with TCOM-400 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10354-24 can also be used in the other direction and will be type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements.
1 : $199.99
25 : $191.99
50 : $185.99
100 : $181.99
13
PE3C10354/WP-60

Pasternack Enterprises Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 7/16 DIN Male (Plug) to N Male (Plug) Low PIM Cable 60 Inch Length Using TCOM-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 7/16 DIN male (plug) to N male (plug) low PIM cable 60 inch length using TCOM-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM 7/16 DIN to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C10354/WP-60 can also be known as a low PIM 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10354/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Our 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C10354/WP-60 is built with TCOM-400 which is a flexible coax type. The Pasternack IP68low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10354/WP-60 can also be used in the other direction and will be a type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements.
1 : $258.99
25 : $246.04
50 : $233.09
100 : $222.73
13
PE3FCA310-30M

Pasternack Enterprises Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: APC, Connector 2 Series: LC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNR, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber LC APC to LC APC, OS2 Single Mode Distribution Cable, 5.0mm Riser, 2.0mm breakout, Yellow-30M. Pasternack’s PE3FCA310-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 6-fiber cable assembly is equipped with LC/APC to LC/APC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA310-30M fiber optic cable with a 5 mm cable diameter and 37 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/APC to LC/APC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.
1 : $216.99
5 : $208.31
10 : $199.63
25 : $190.95
11
PE3C10333-36

Pasternack Enterprises Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 7/16 DIN Male to 7/16 DIN Male Low PIM Cable 36 Inch Length Using TCOM-240 Coax With Times Microwave Components., Radio frequency assembly 7/16 DIN male to 7/16 DIN male low PIM cable 36 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male low PIM cable 36 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 7/16 DIN to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10333-36 can also be known as a low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10333-36 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C10333-36 is built with TCOM-240 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to 7/16 DIN low PIM RF cable assembly as per your requirements.
1 : $175.99
25 : $168.95
50 : $163.67
100 : $160.15
7
PE3C10349-48

Pasternack Enterprises Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 4.3-10 Male to 4.3-10 Male Low PIM Cable 48 Inch Length Using TCOM-400 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male low PIM cable 48 inch length using TCOM-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 4.3-10 male low PIM cable 48 inch length using TCOM-400 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our low PIM a 4.3-10 to a 4.3-10 cable assembly has male gender on end 1 and male on end 2. PE3C10349-48 can also be known as a low PIM 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10349-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. 4.3-10 plug to 4.3-10 plug cable assembly PE3C10349-48 is built with TCOM-400 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements.
1 : $203.99
25 : $195.83
50 : $189.71
100 : $185.63
0
PE3C10362-180

Pasternack Enterprises Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. 4.3-10 Male to 4.3-10 Male Low PIM Cable 180 Inch Length Using TCOM-600 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male low PIM cable 180 inch length using TCOM-600 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 4.3-10 male low PIM cable 180 inch length using TCOM-600 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our low PIM a 4.3-10 to a 4.3-10 cable assembly has male gender on end 1 and male on end 2. PE3C10362-180 can also be known as a low PIM 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10362-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 4.3-10 plug to 4.3-10 plug cable assembly PE3C10362-180 is built with TCOM-600 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements.
1 : $517.99
25 : $497.27
50 : $481.73
100 : $471.37
0
PE3W06710-36

Pasternack Enterprises Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. MMCX Plug to SMA Female Low Loss Cable 36 Inch Length Using LMR-100 Coax., Radio frequency assembly MMCX plug to SMA female low loss cable 36 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MMCX plug to SMA female low loss cable 36 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with MMCX cable connection on one end and SMA cable connection on the other. Our low loss MMCX to SMA cable assemblies have a plug gender on end 1 and female on end 2. PE3W06710-36 can also be known as a low loss MMCX male to SMA jack cable assembly and will be shipped same-day as it is purchased. MMCX male to SMA jack cable assembly PE3W06710-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency MMCX plug to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06710-36 can also be used in the other direction and will be SMA female to MMCX plug cable assembly if the opposite connectivity is required. Low loss MMCX male to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMA cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug to SMA female low loss cable 36 inch length using LMR-100 coax.
1 : $63.19
25 : $60.03
50 : $56.87
100 : $54.34
0
PE3W10339

Pasternack Enterprises Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. D-Sub Plug to SMA Female Cable Using LMR-195 Coax. PE3W10339 is a D-Sub plug to SMA female cable using LMR-195 coax. This Pasternack D-Sub plug to SMA female cable assembly uses a 50 Ohm D-Sub for connector 1 and a 50 Ohm SMA for connector 2. Our plug D-Sub to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10339 D-Sub plug to SMA female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W10384

Pasternack Enterprises Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using PE-C100-LSZH Coax. PE3W10384 is a TNC male to TNC male cable using PE-C100-LSZH coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10384 TNC male to TNC male cable assembly is constructed with PE-C100-LSZH coax.
0
PE3W11031

Pasternack Enterprises Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm.
0
PE3W11037/HS

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-500, RF Cable Type: SPF-500, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using SPF-500 Coax with HeatShrink. PE3W11037/HS is a N male to N male cable using SPF-500 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W11037/HS N male to N male cable assembly is constructed with SPF-500 coax.
0
PE3W20103

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Male to SMC Plug Cable Using PE-SR405FL Coax. PE3W20103 is a SMA male to SMC plug cable using PE-SR405FL coax. This Pasternack SMA male to SMC plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMC for connector 2. Our male SMA to plug SMC cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W20103 SMA male to SMC plug cable assembly is constructed with PE-SR405FL coax.
0

Waytek, Inc.
643221039

Molex CP Terminal 0.6 Sn - 0.50sqmm (Reel = 12,000 60k min)
60,000 : $0.082
300,000 : $0.0788
36,000
12103881

Aptiv PLC Female Metric Pack Terminal DELPHI 12103881 5000 PC Reel Metri-Pack 150 Tin Plated
5,000 : $0.0722
25,000 : $0.0666
20,000
643241039

Molex CP Terminal 2.8 Sn-1 to 2sqmm Reel (2,500 pcs per reel )
2,500 : $0.1933
12,500 : $0.1857
12,500
643241039

Molex CP Terminal 2.8 Sn-1 to 2sqmm Loose disc way, no repl
20 : $0.3157
200 : $0.2986
500 : $0.278
1,000 : $0.2677
11,805
12103881-L

Aptiv PLC 18-16GA Female Metric Pack TERMINAL LOOS PIECE 12103881 FOR PN 38219 AND 38221
25 : $0.1646
50 : $0.1584
100 : $0.1534
200 : $0.1459
500 : $0.1409
1,000 : $0.1365
10,508
192210381

Molex 3/0 Copper Eyelet 3/8" Stud
RoHS : Compliant
1 : $2.8844
10 : $2.5612
50 : $2.3997
100 : $2.3074
200 : $2.2152
500 : $2.0998
2,524
192210395

Molex 1GA Copper Eyelet 1/2" Stud
RoHS : Compliant
10 : $2.0701
50 : $1.8382
100 : $1.7222
200 : $1.656
500 : $1.5897
1,000 : $1.5069
1,073
57360 OR 611-036

Ideal Clamp Products Inc Standard Stainless Steel Band Hose Clamp #36 Band 1/2" 3/4" TO 2-3/4"
10 : $1.7326
50 : $1.5465
100 : $1.4033
200 : $1.3603
500 : $1.3103
1,000 : $1.2601
1,056
57320 OR 611-032

Ideal Clamp Products Inc Standard Stainless Steel Band Hose Clamp #32 Band 1/2" 1-1/2" TO 2-1/2"
10 : $1.6991
50 : $1.5103
100 : $1.3704
200 : $1.3285
500 : $1.2795
1,000 : $1.2306
580
11030044

Molex Removal Tool MOLEX 11030044 MINI FIT JR
RoHS : Compliant
1 : $27.95
10 : $26.28
225
684-2421-032-02

Trombetta Sealed 24V DC Contactor Continuous Duty, Flat Bracket Silver Contacts
1 : $41.41
5 : $36.98
10 : $34.51
50 : $32.53
100 : $31.06
200 : $29.58
89
WTU-110-38LC-BULK

NSPA Non-Insulated Long Neck Ring Terminal, 12-10 Ga, #3/8 Stud
20 : $0.5876
50 : $0.5236
100 : $0.4751
200 : $0.4595
500 : $0.4441
1,000 : $0.4266
88
684-1261-032-02

Trombetta Sealed 12V DC Contactor Continous Duty, Curved L-Bracket Silver Contacts
1 : $41.08
5 : $36.68
10 : $34.23
50 : $32.28
100 : $30.8
200 : $29.34
87
192210399

Molex 2GA Copper Eyelet 1/2" Stud
RoHS : Compliant
10 : $1.9869
50 : $1.7644
100 : $1.6531
200 : $1.5895
500 : $1.5259
1,000 : $1.4464
79
643221039

Molex CP Terminal 0.6 Sn - 0.50sqmm
50 : $0.183
200 : $0.1736
500 : $0.1609
1,000 : $0.155
0

Win Source Electronics
505110-3091

Molex Conn; Rect; Rt. Angle; FFC/FPC; 0.50MM Pitch; 30 Circuit; Bottom Contact; ZIF
RoHS : Compliant
2,220 : $0.1353
1,780 : $0.1408
1,370 : $0.1462
955 : $0.1572
615 : $0.1627
290 : $0.1737
990,000
NTCG103JF103FT1

TDK Corporation NTC THERMISTOR 10K OHM 1% 0402
RoHS : Compliant
15,230 : $0.0197
11,365 : $0.022
8,775 : $0.0228
6,385 : $0.0235
4,120 : $0.0243
1,690 : $0.0296
260,000
NTCG103JF103FT1S

TDK Corporation THERMISTOR NTC 10KOHM 3380K 0402 / NTC Thermistor 10k 0402 (1005 Metric)
RoHS : Compliant
12,770 : $0.0235
9,545 : $0.0262
7,385 : $0.0271
5,360 : $0.028
3,465 : $0.0289
1,425 : $0.0352
260,000
TCMT1103

Vishay Huntington Optocoupler DC-IN 1-CH Transistor DC-OUT 4-Pin Mini-Flat T/R / OPTOISOLATOR 3.75KV TRANS 4-SOP
1,040 : $0.2887
780 : $0.322
605 : $0.3331
440 : $0.3442
285 : $0.3553
120 : $0.433
51,000
STM32F103VCH6

STMicroelectronics IC MCU 32BIT 256KB FLASH 100BGA
RoHS : Compliant
38 : $8.9156
29 : $9.9443
22 : $10.2872
16 : $10.6301
11 : $10.973
5 : $13.3734
44,323
STM32F103VBT6TR

STMicroelectronics IC MCU 32BIT 128KB FLASH 100LQFP / Medium-density performance line ARM-based 32-bit MCU with 64 or 128 KB Flash, USB, CAN, 7 timers, 2 ADCs, 9 communication interfaces
RoHS : Compliant
96 : $3.1463
72 : $3.5093
56 : $3.6303
40 : $3.7514
26 : $3.8724
11 : $4.7194
30,710
STM32F103T8U6

STMicroelectronics IC MCU 32BIT 64KB FLASH 36VFQFPN / MCU 32-bit ARM Cortex M3 RISC 64KB Flash 2.5V/3.3V 36-Pin VFQFPN EP Tray
RoHS : Compliant
110 : $2.744
82 : $3.0606
64 : $3.1662
46 : $3.2717
30 : $3.3772
13 : $4.116
15,885
STM32F103RBH6

STMicroelectronics IC MCU 32BIT 128KB FLASH 64TFBGA
RoHS : Compliant
158 : $1.9018
118 : $2.1212
92 : $2.1943
67 : $2.2675
43 : $2.3406
18 : $2.8526
11,520
STM32F103ZEH6TR

STMicroelectronics IC MCU 32BIT 512KB FLASH 144BGA
RoHS : Compliant
13 : $23.6364
10 : $26.3637
8 : $27.2728
6 : $28.1819
4 : $29.091
2 : $35.4546
8,430
STM32F103R6T6A

STMicroelectronics IC MCU 32BIT 32KB FLASH 64LQFP
RoHS : Compliant
47 : $6.4737
38 : $6.7369
29 : $7.0001
20 : $7.5264
13 : $7.7895
7 : $8.3158
8,400
3266W-1-103LF

Bourns Inc TRIMMER 10K OHM 0.25W PC PIN / Res Cermet Trimmer 10K Ohm 10% 0.25W(1/4W) 12(Elec)Turns 1.78mm (6.71 X 4.5 X 8.26mm) Pin Thru-Hole Tube
RoHS : Compliant
310 : $0.9795
230 : $1.0925
180 : $1.1301
130 : $1.1678
85 : $1.2055
35 : $1.4692
8,226
4609X-101-103LF

Bourns Inc RES ARRAY 8 RES 10K OHM 9SIP / 10k Ohm ±2% 200mW Power Per Element Bussed 8 Resistor Network/Array ±100ppm/°C 9-SIP
RoHS : Compliant
2,900 : $0.1035
2,165 : $0.1155
1,675 : $0.1195
1,220 : $0.1234
785 : $0.1274
325 : $0.1553
5,000
STM32F103ZCT6TR

STMicroelectronics High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces | IC MCU 32BIT 256KB FLASH 144LQFP
RoHS : Compliant
32 : $9.3894
26 : $9.771
20 : $10.1527
14 : $10.9161
9 : $11.2978
5 : $12.0611
4,100
TPS3103E12DBVR

Texas Instruments IC SUPERVISORY CIRCUIT SOT-23-6
RoHS : Compliant
430 : $0.7872
320 : $0.8781
250 : $0.9083
180 : $0.9386
120 : $0.9689
50 : $1.1808
540
X9C103P

Renesas Electronics Corporation E2POT™ Nonvolatile Digital Potentiometer | IC DGTL POT 10KOHM 100TAP 8DIP
RoHS : Not Compliant
250 : $1.202
190 : $1.3407
145 : $1.3869
105 : $1.4331
70 : $1.4794
30 : $1.803
471

Wuhan P&S
NTCS0603E3103FLT

Vishay Intertechnologies SMD 0603, NTC Thermistors
RoHS : Compliant
1 : $0.73
100 : $0.25
500 : $0.23
1,000 : $0.22
380,000
NTCS0805E3103HMT

Vishay Intertechnologies NTC SMD 0805 NISN 10K 3% MEDIUM B E3
RoHS : Compliant
1 : $1.27
100 : $0.43
500 : $0.4
1,000 : $0.39
112,000
VJ0402Y103KXAAC

Vishay Intertechnologies Surface Mount Multilayer Ceramic Chip Capacitors
RoHS : Compliant
1 : $0.21
100 : $0.07
500 : $0.07
1,000 : $0.07
40,000
NTCLE350E4103JLB0

Vishay Intertechnologies NTC Thermistors
RoHS : Compliant
1 : $2.23
100 : $0.75
500 : $0.69
1,000 : $0.67
35,500
MAL214699103E3

Vishay Intertechnologies SMD 100UF 50V 10X10X10 125��C
RoHS : Compliant
1 : $6.73
100 : $2.25
500 : $2.08
1,000 : $2.02
31,000
PR01000103308JA100

Vishay Intertechnologies PR01 5% A1 3R3
RoHS : Compliant
1 : $0.37
100 : $0.13
500 : $0.12
1,000 : $0.12
30,000
LL103A-GS08

Vishay Intertechnologies 40V,200mA,Small Signal Schottky Diode
RoHS : Compliant
1 : $0.14
100 : $0.11
500 : $0.08
1,000 : $0.06
30,000
SD103A-TAP

Vishay Intertechnologies Small Signal Schottky Diodes��40 V 200mA
RoHS : Compliant
1 : $0.25
100 : $0.09
500 : $0.08
1,000 : $0.08
30,000
TCDT1103G

Vishay Intertechnologies Optocoupler, Phototransistor Output
RoHS : Compliant
1 : $1.76
100 : $0.59
500 : $0.55
1,000 : $0.53
10,000
NTCALUG02A103F165A

Vishay Intertechnologies NTC thermistor 10k
RoHS : Compliant
1 : $7.42
100 : $2.48
500 : $2.29
1,000 : $2.23
10,000
MAL205658103E3

Vishay Intertechnologies 10000UF 63V 35X50 85��C 12000H
RoHS : Compliant
1 : $64.11
100 : $21.37
500 : $19.77
1,000 : $19.24
7,000
MMA02040D5103FB300

Vishay Intertechnologies Professional Thin Film MELF Resistors 510 k�� ��1% 0.25W
RoHS : Compliant
1 : $0.57
100 : $0.19
500 : $0.18
1,000 : $0.17
3,000
MBRD1035CTLG

onsemi SWITCHMODE Schottky Power Rectifiers
RoHS : Compliant
1 : $1.37
100 : $0.87
500 : $0.72
1,000 : $0.66
2,325
1812L110/33MR

Littelfuse Inc 33V,20A,1812 Surface Mount PTC
RoHS : Compliant
1 : $0.16
100 : $0.13
500 : $0.1
1,000 : $0.07
2,000
RS01030R00BE14

Vishay Intertechnologies -
1 : $68.36
100 : $22.79
500 : $21.08
1,000 : $20.51
10

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Link to Datasheet   |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com