Electronic Components Datasheet Search
  English  ▼
ALLDATASHEET.COM

X  



0335W2-R Distributor

DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

PUI
12.60335

25,600

Flip Electronics
CYPD1103-35FNXI

Cypress Semiconductor Stock
21,000
CYPD1103-35FNXCT

Cypress Semiconductor Stock
21,000
CYPD1103-35FNXIT

Infineon Technologies AG Stock, Ship Today
1 : $1.23
21,000
R4F20335RDFE#V0

Renesas Electronics Corporation Stock
2,193

Pasternack Enterprises US
PE3W10335

Pasternack Enterprises Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to 2.92mm Female Cable Using PE-047SR Coax., Radio frequency assembly mini SMP female right angle to 2.92mm female cable using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to 2.92mm female cable using PE-047SR coax, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and 2.92mm cable connection on the other. Our right angle mini SMP to 2.92mm cable assemblies have a female gender on end 1 and female on end 2. PE3W10335 can also be known as a right angle mini SMP jack to 2.92mm jack cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to 2.92mm jack cable assembly PE3W10335 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid Mini SMP cable assembly is manufactured with right angle mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency mini SMP right angle female to 2.92mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10335 can also be used in the other direction and will be 2.92mm female to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to 2.92mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to 2.92mm female cable using PE-047SR coax.
145
PE3C10335

Pasternack Enterprises Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm. 4.3-10 Male to 7/16 DIN Male Low PIM Cable Using TCOM-240 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 7/16 DIN male low PIM cable using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 7/16 DIN male low PIM cable using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 4.3-10 to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10335 can also be known as a low PIM 4.3-10 plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10335 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C10335 is built with TCOM-240 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10335 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements.
41
PE3C10335-24

Pasternack Enterprises Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 4.3-10 Male to 7/16 DIN Male Low PIM Cable 24 Inch Length Using TCOM-240 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 7/16 DIN male low PIM cable 24 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 7/16 DIN male low PIM cable 24 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 4.3-10 to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10335-24 can also be known as a low PIM 4.3-10 plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10335-24 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C10335-24 is built with TCOM-240 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10335-24 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements.
1 : $160.99
25 : $154.55
50 : $149.72
100 : $146.5
10
PE3C10335-48

Pasternack Enterprises Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 4.3-10 Male to 7/16 DIN Male Low PIM Cable 48 Inch Length Using TCOM-240 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 7/16 DIN male low PIM cable 48 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 7/16 DIN male low PIM cable 48 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 4.3-10 to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10335-48 can also be known as a low PIM 4.3-10 plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10335-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C10335-48 is built with TCOM-240 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10335-48 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements.
1 : $173.99
25 : $167.03
50 : $161.81
100 : $158.33
5
PE3W03354LF

Pasternack Enterprises Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. 3.5mm Male to 3.5mm Male Cable Using Tinned RG402 Coax, LF Solder, RoHS. PE3W03354LF is a 3.5mm male to 3.5mm male cable using RG402 Tinned coax. This Pasternack 3.5mm male to 3.5mm male cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm 3.5mm for connector 2. Our male 3.5mm to male 3.5mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W03354LF 3.5mm male to 3.5mm male cable assembly is constructed with RG402 Tinned coax.
0
PE3W03358

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Thread, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Reverse Thread SMA Female Cable Using RG174 Coax. PE3W03358 is a SMA male right angle to reverse thread SMA female cable using RG174 coax. This Pasternack SMA male right angle to reverse thread SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to reverse thread female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03358 SMA male right angle to SMA reverse thread female cable assembly is constructed with RG174 coax.
0
PE3W03351/HS

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-195 Coax with HeatShrink. PE3W03351/HS is a N male to N male cable using LMR-195 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03351/HS N male to N male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W00335

Pasternack Enterprises Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Low Loss Cable Using LMR-200 Coax., Radio frequency assembly N male right angle to N male right angle low loss cable using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male right angle low loss cable using LMR-200 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and right angle type N cable connection on the other. Our low loss right angle type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE3W00335 can also be known as a low loss right angle type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3W00335 is built with LMR-200 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N right angle male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N right angle plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N male right angle low loss cable using LMR-200 coax.
0
PE3W03357LF

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Reverse Polarity SMA Female Cable Using RG174 Coax, LF Solder. PE3W03357LF is a SMA male right angle to reverse polarity SMA female cable using RG174 coax. This Pasternack SMA male right angle to reverse polarity SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to reverse polarity female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03357LF SMA male right angle to SMA reverse polarity female cable assembly is constructed with RG174 coax.
0
PE3W03350

Pasternack Enterprises Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. Full Detent SMP Male Bulkhead to SMP Female Right Angle Cable Using RG405 Coax. PE3W03350 is a SMP male bulkhead to SMP female right angle cable using RG405 coax. This Pasternack SMP male bulkhead to SMP female right angle cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMP for connector 2. SMP to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMP bulkhead to female SMP right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W03350 SMP male bulkhead to SMP female right angle cable assembly is constructed with RG405 coax.
0
PE3W03357

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Reverse Polarity SMA Female Cable Using RG174 Coax. PE3W03357 is a SMA male right angle to reverse polarity SMA female cable using RG174 coax. This Pasternack SMA male right angle to reverse polarity SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to reverse polarity female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03357 SMA male right angle to SMA reverse polarity female cable assembly is constructed with RG174 coax.
0
PE3W00335-72

Pasternack Enterprises Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. N Male Right Angle to N Male Right Angle Cable Using LMR-200 Coax., Radio frequency assembly N male right angle to N male right angle cable using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male right angle cable using LMR-200 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle N type cable connection on one end and right angle N type cable connection on the other. Our low loss right angle type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3W00335-72 can also be known as a low loss right angle type N plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3W00335-72 is built with LMR-200 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type right angle male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N right angle plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N male right angle cable using LMR-200 coax.
1 : $235.99
25 : $224.19
50 : $212.39
100 : $202.95
0
PE3W00335/PH180

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using LMR-200 Coax with 180 Deg. Clock. PE3W00335/PH180 is a N male right angle to N male right angle cable using LMR-200 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00335/PH180 N male right angle to N male right angle cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W03353/HS

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using LMR-240-DB Coax with HeatShrink. PE3W03353/HS is a SMA male to SMA male cable using LMR-240-DB coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03353/HS SMA male to SMA male cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W20335LF

Pasternack Enterprises Key Specifications, Connector Series 1: 20KV, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 20KV, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. 20KV Female Bulkhead to 20KV Female Bulkhead Cable Using RG213 Coax, LF Solder. PE3W20335LF is a 20KV female bulkhead to 20KV female bulkhead cable using RG213 coax. This Pasternack 20KV female bulkhead to 20KV female bulkhead cable assembly uses a 50 Ohm 20KV for connector 1 and a 50 Ohm 20KV for connector 2. Our female 20KV bulkhead to female 20KV bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20335LF 20KV female bulkhead to 20KV female bulkhead cable assembly is constructed with RG213 coax.
0

Teledyne HiRel
M38510/33501BBA

Teledyne HiRel OR GATE, QUAD 2-INPUT
RoHS : Not Compliant
0
M38510/33501BDA

Teledyne HiRel OR GATE, QUAD 2-INPUT
RoHS : Not Compliant
0
M38510/33501B2A

Teledyne HiRel OR GATE, QUAD 2-INPUT
RoHS : Not Compliant
0
M38510/33501BAA

Teledyne HiRel OR GATE, QUAD 2-INPUT
RoHS : Not Compliant
0
M38510/33501BCA

Teledyne HiRel OR GATE, QUAD 2-INPUT
RoHS : Not Compliant
0

Vyrian
MAX20335AEWX-T

Analog Devices (Maxim Integrated)
12,167
MAX20335BEWX+

Analog Devices Inc Power Supply Support Circuit
RoHS : Compliant
10,320
M38510/33501BDX

Texas Instruments OR Gate, F/FAST Series, 4-Func, 2-Input, TTL, CDFP14
9,520
MAX20335BEWX-T

Analog Devices (Maxim Integrated)
8,352
MAX20335DEWX+T

Analog Devices Inc Power Supply Support Circuit
RoHS : Compliant
8,115
TIDA-00335

Texas Instruments
7,786
MAX20335BEWX

Analog Devices (Maxim Integrated)
7,331
MAX20335EVKIT

Analog Devices (Maxim Integrated)
7,315
MAX20335AEWX

Analog Devices (Maxim Integrated)
7,130
MAX20335DEWX+

Analog Devices Inc Power Supply Support Circuit
RoHS : Compliant
6,637
M38510/33501B2X

Texas Instruments OR Gate, F/FAST Series, 4-Func, 2-Input, TTL, CQCC20
6,500
M38510/33501BCX

Texas Instruments OR Gate, F/FAST Series, 4-Func, 2-Input, TTL, CDIP14
6,109
MAX20335DEWX-T

Analog Devices (Maxim Integrated)
5,606
MAX20335EVSYS

Analog Devices (Maxim Integrated)
5,381
MAX20335BEWX+T

Analog Devices Inc Power Supply Support Circuit
RoHS : Compliant
5,320

Win Source Electronics
GRM0335C1H100JA01D

Murata Manufacturing Co Ltd CAP CER 10PF 50V C0G/NP0 0201
RoHS : Compliant
176,475 : $0.0017
131,580 : $0.0019
100,000 : $0.002
75,000 : $0.002
47,620 : $0.0021
20,000 : $0.0025
990,000
GRM0335C1H180JA01D

Murata Manufacturing Co Ltd CAP CER 18PF 50V C0G/NP0 0201
RoHS : Compliant
100,000 : $0.003
73,530 : $0.0034
57,145 : $0.0035
41,670 : $0.0036
27,030 : $0.0037
11,115 : $0.0045
990,000
GRM0335C1H2R0BA01D

Murata Manufacturing Co Ltd CAP CER 2PF 50V C0G/NP0 0201 / Cap Ceramic 2pF 50V C0G 0.1pF Pad SMD 0201 125°C T/R
RoHS : Compliant
125,000 : $0.0024
92,595 : $0.0027
71,430 : $0.0028
51,725 : $0.0029
33,335 : $0.003
13,890 : $0.0036
921,060
GRM0335C1H220JA01D

Murata Manufacturing Co Ltd CAP CER 22PF 50V C0G/NP0 0201 / Cap Ceramic 22pF 50V C0G 5% Pad SMD 0201 125°C T/R
RoHS : Compliant
150,000 : $0.002
113,640 : $0.0022
86,960 : $0.0023
62,500 : $0.0024
40,000 : $0.0025
16,670 : $0.003
339,360
GRM0335C1E470JA01D

Murata Manufacturing Co Ltd CAP CER 47PF 25V C0G/NP0 0201
RoHS : Compliant
103,450 : $0.0029
78,125 : $0.0032
60,610 : $0.0033
44,120 : $0.0034
28,575 : $0.0035
11,630 : $0.0043
300,000
GJM0335C1ER70WB01D

Murata Manufacturing Co Ltd CAP CER 0.7PF 25V C0G/NP0 0201
RoHS : Compliant
25,000 : $0.012
18,800 : $0.0133
14,495 : $0.0138
10,565 : $0.0142
6,805 : $0.0147
2,795 : $0.0179
300,000
GRM0335C1H330GA01D

Murata Manufacturing Co Ltd CAP CER 33PF 50V C0G/NP0 0201 / 33 pF ±2% 50V Ceramic Capacitor C0G, NP0 0201 (0603 Metric)
RoHS : Compliant
41,100 : $0.0073
30,865 : $0.0081
23,810 : $0.0084
17,245 : $0.0087
11,115 : $0.009
4,590 : $0.0109
270,000
GRM0335C1H120GA01D

Murata Manufacturing Co Ltd CAP CER 12PF 50V C0G/NP0 0201 / 12 pF ±2% 50V Ceramic Capacitor C0G, NP0 0201 (0603 Metric)
RoHS : Compliant
50,850 : $0.0059
37,880 : $0.0066
29,415 : $0.0068
21,130 : $0.0071
13,700 : $0.0073
5,620 : $0.0089
241,000
GRM0335C1H2R7BA01D

Murata Manufacturing Co Ltd CAP CER 2.7PF 50V C0G/NP0 0201 / Cap Ceramic 2.7pF 50V C0G 0.1pF Pad SMD 0201 125°C T/R
RoHS : Compliant
71,430 : $0.0042
53,195 : $0.0047
41,670 : $0.0048
30,000 : $0.005
19,610 : $0.0051
7,940 : $0.0063
240,000
GJM0335C1ER30WB01D

Murata Manufacturing Co Ltd CAP CER 0.3PF 25V C0G/NP0 0201
RoHS : Compliant
17,860 : $0.0168
13,300 : $0.0188
10,310 : $0.0194
7,465 : $0.0201
4,835 : $0.0207
1,985 : $0.0252
215,469
GRM0335C1HR20BA01D

Murata Manufacturing Co Ltd CAP CER 0.2PF 50V C0G/NP0 0201
RoHS : Compliant
100,000 : $0.003
75,760 : $0.0033
58,825 : $0.0034
42,860 : $0.0035
27,780 : $0.0036
11,365 : $0.0044
160,000
GRM0335C1H221JA01D

Murata Manufacturing Co Ltd Cap Ceramic 220pF 50V C0G 5% Pad SMD 0201 125°C T/R / CAP CER 220PF 50V C0G/NP0 0201
RoHS : Compliant
39,475 : $0.0076
29,415 : $0.0085
22,730 : $0.0088
16,670 : $0.009
10,755 : $0.0093
4,390 : $0.0114
64,914
GRM0335C1H2R4BA01D

Murata Manufacturing Co Ltd CAP CER 2.4PF 50V C0G/NP0 0201 / Cap Ceramic 2.4pF 50V C0G 0.1pF Pad SMD 0201 125°C T/R
RoHS : Compliant
85,715 : $0.0035
64,105 : $0.0039
50,000 : $0.004
36,590 : $0.0041
23,260 : $0.0043
9,620 : $0.0052
60,000
GRM0335C1H181JA01D

Murata Manufacturing Co Ltd CAP CER 180PF 50V C0G/NP0 0201 / Cap Ceramic 180pF 50V C0G 5% Pad SMD 0201 125°C T/R
RoHS : Compliant
93,750 : $0.0032
71,430 : $0.0035
55,560 : $0.0036
39,475 : $0.0038
25,645 : $0.0039
10,640 : $0.0047
54,000
GRM0335C1E1R2CA01D

Murata Manufacturing Co Ltd CAP CER 1.2PF 25V C0G/NP0 0201
RoHS : Compliant
150,000 : $0.002
113,640 : $0.0022
86,960 : $0.0023
62,500 : $0.0024
40,000 : $0.0025
16,670 : $0.003
30,000

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Link to Datasheet   |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com