| Electronic Components Datasheet Search |
|
019L-15-R16-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 65461-019LF | Amphenol Corporation | PIN: 10; Plating: gold-plated |
| 1,769 | |
| SQM100P10-19L_GE3 | Vishay Intertechnologies | Transistor: P-MOSFET; unipolar; -100V; -53A; 125W; D2PAK,TO263 RoHS : Compliant |
| 784 | ||
| 65801-019LF | Amphenol Corporation | Connector: FFC/FPC; data; tinned; 2A; PIN: 19; vertical; -65÷105°C |
| 768 | ||
| 10073456-019LF | Amphenol Corporation | Connector: IDC; male; data; PIN: 20; Quickie; straight; 3A; THT |
| 485 | ||
| 10121067-1019LF | Amphenol Corporation | Connector: DIN 41612; data |
| 315 | ||
| SUM90P10-19L-E3 | Vishay Intertechnologies | Transistor: P-MOSFET; TrenchFET®; unipolar; -100V; -90A; Idm: -90A RoHS : Compliant |
| 207 | ||
| 65240-019LF | Amphenol Corporation | Connector: wire-board; female; data; PIN: 19; straight; crimped |
| 100 | ||
| 10128419-1019LF | Amphenol Corporation | Connector: DIN 41612; data; PIN: 112; angled; Press-Fit |
| 84 | ||
| GEN-40-19/LN | TDK-Lambda Corporation | Laboratory power supply: programmable; single-channel; 0÷40VDC |
| 2 | ||
| GENH-40-19/LN | TDK-Lambda Corporation | Laboratory power supply: programmable; single-channel; 0÷40VDC |
| 0 | ||
| GN20019L | Lovato Electric Inc | Switch: cam switch Dahlander; Stabl.pos: 3; 200A; 0-1-2; Pos: 3 |
| 0 | ||
| GENH40-19-LAN/LN | TDK-Lambda Corporation | Laboratory power supply: programmable; single-channel; 0÷40VDC |
| 0 | ||
![]() Avnet Americas | SQM100P10-19L_GE3 | Vishay Intertechnologies | - Tape and Reel (Alt: SQM100P10-19L_GE3) RoHS : Not Compliant |
| 3,200 | |
| TSW-120-19-L-S | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 2.54 mm, 1 Rows, 20 Contacts, Through Hole, TSW Series - Bulk (Alt: TSW-120-19-L-S) RoHS : Compliant |
| 0 | ||
| TSW-110-19-L-D | Samtec Inc | Pin Header, Board-to-Board, 2.54 mm, 2 Rows, 20 Contacts, Through Hole, TSW Series - Bulk (Alt: TSW-110-19-L-D) RoHS : Compliant |
| 0 | ||
| DW-10-19-L-D-780 | Samtec Inc | - Bulk (Alt: DW-10-19-L-D-780) RoHS : Compliant |
| 0 | ||
| DW-10-19-L-D-800 | Samtec Inc | - Bulk (Alt: DW-10-19-L-D-800) RoHS : Compliant |
| 0 | ||
| 4310-019LF | CTS Corporation | - Bulk (Alt: 4310-019LF) RoHS : Compliant |
| 0 | ||
| G09-433A-019-L | Bel Fuse | - Trays (Alt: G09-433A-019-L) RoHS : Compliant |
| 0 | ||
| M83536/6-019L | TE Connectivity | - Bulk (Alt: 5-1617787-9) RoHS : Not Compliant |
| 0 | ||
| M83536/16-019L | TE Connectivity | - Bulk (Alt: 1617786-5) RoHS : Not Compliant |
| 0 | ||
| EW-20-19-L-D-790 | Samtec Inc | - Bulk (Alt: EW-20-19-L-D-790) RoHS : Compliant |
| 0 | ||
| 74233-1019LF | Amphenol Corporation | - Bulk (Alt: 74233-1019LF) RoHS : Compliant |
| 0 | ||
| HTSW-110-19-L-D-LL | Samtec Inc | Pin Header, Vertical, Board-to-Board, 2.54 mm, 2 Rows, 20 Contacts, Through Hole, HTSW Series - Bulk (Alt: HTSW-110-19-L-D-LL) RoHS : Compliant |
| 0 | ||
| DW-20-19-L-D-1000 | Samtec Inc | - Bulk (Alt: DW-20-19-L-D-1000) RoHS : Compliant |
| 0 | ||
| DW-30-19-L-D-900-LL | Samtec Inc | - Bulk (Alt: DW-30-19-L-D-900-LL) RoHS : Compliant |
| 0 | ||
| DW-50-19-L-D-790 | Samtec Inc | - Bulk (Alt: DW-50-19-L-D-790) RoHS : Compliant |
| 0 | ||
![]() Newark | TSW-120-19-L-S | Samtec Inc | Header, 2.54Mm, Tht Vert, 20Way; |Samtec, Inc. TSW-120-19-L-S RoHS : Compliant |
| 784 | |
| TSW-110-19-L-D | Samtec Inc | Conn, Header, 20Pos, 2Row, 2.54Mm; |Samtec, Inc. TSW-110-19-L-D RoHS : Compliant |
| 470 | ||
| HTSW-110-19-L-D-LL | Samtec Inc | Header, 2.54Mm, Tht Vert, 20Way; |Samtec, Inc. HTSW-110-19-L-D-LL RoHS : Compliant |
| 290 | ||
| DW-10-19-L-D-780 | Samtec Inc | Conn Stack Brd, 2.54Mm, 20Pos, Hdr; |Samtec, Inc. DW-10-19-L-D-780 RoHS : Compliant |
| 272 | ||
| DW-10-19-L-D-800 | Samtec Inc | Conn Stack Brd, 2.54Mm, 20Pos, Hdr; |Samtec, Inc. DW-10-19-L-D-800 RoHS : Compliant |
| 167 | ||
| DW-10-19-L-D-938 | Samtec Inc | Conn Stack Brd, 2.54Mm, 20Pos, Hdr; |Samtec, Inc. DW-10-19-L-D-938 RoHS : Compliant |
| 167 | ||
| EW-20-19-L-D-790 | Samtec Inc | Conn Stack Brd, 2.54Mm, 40Pos, Hdr; |Samtec, Inc. EW-20-19-L-D-790 RoHS : Compliant |
| 110 | ||
| DW-20-19-L-D-1000 | Samtec Inc | Conn Stack Brd, 2.54Mm, 40Pos, Hdr; |Samtec, Inc. DW-20-19-L-D-1000 RoHS : Compliant |
| 84 | ||
| DW-50-19-L-D-790 | Samtec Inc | Conn Stack Brd, 2.54Mm, 100Pos, Hdr; |Samtec, Inc. DW-50-19-L-D-790 RoHS : Compliant |
| 64 | ||
| DW-40-19-L-D-650 | Samtec Inc | Conn Stack Brd, 2.54Mm, 80Pos, Hdr; |Samtec, Inc. DW-40-19-L-D-650 RoHS : Compliant |
| 56 | ||
| DW-30-19-L-D-750-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 60Pos, Hdr; |Samtec, Inc. DW-30-19-L-D-750-LL RoHS : Compliant |
| 52 | ||
| DW-30-19-L-D-900-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 60Pos, Hdr; |Samtec, Inc. DW-30-19-L-D-900-LL RoHS : Compliant |
| 43 | ||
| DW-30-19-L-D-875-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 60Pos, Hdr; |Samtec, Inc. DW-30-19-L-D-875-LL RoHS : Compliant |
| 43 | ||
| 2019L | Brady Worldwide Inc | |Brady 2019L RoHS : Not Compliant |
| 30 | ||
| GEN40-19/LN | TDK-Lambda Corporation | |Tdk-Lambda GEN40-19/LN RoHS : Compliant |
| 3 | ||
![]() RS | 2019L | Brady Worldwide Inc | COMPACT EAR PLUG DISPENSER WITH COVER |
| 0 | |
| PB04019L | Maple Systems Inc | LEGEND PLATE FRAME WITH LABEL - ON / OFF / ON |
| 0 | ||
D22019LV![]() | NKK Switches | SWITCH, MINI TOGGLE, SPDT, ON-OFF-(ON),LOCKING LVR, VERT PC W/BRCKT,0.4VA,48VAC/DC RoHS : Compliant |
| 0 | ||
D22019LB![]() | NKK Switches | SWITCH, MINI TOGGLE, SPDT, ON-OFF-(ON),LOCKING LVR, STR PC W/BRCKT,0.4VA,48VAC/DC RoHS : Compliant |
| 0 | ||
| 7501-9LA | Arrow Hart | SWITCH DECOR. SP 15A 120/277V AG LA |
| 0 | ||
| 66527019LF | Amphenol FCi | GUIDE PIN CARD CONNECTOR |
| 0 | ||
| 67000019LF | Amphenol FCi | DUFLEX HSG .100 SPEC |
| 0 | ||
| 748172019LF | Amphenol FCi | 74817-2019LF-M1000SIGHDRS/LSTRP/F 5X6 |
| 0 | ||
| 65043-019LF | Amphenol FCi | MINI LATCH HSG DR-65043-019LF RoHS : Compliant |
| 0 | ||
| 74233-1019LF | Amphenol FCi | USB-74233-1019LF RoHS : Compliant |
| 0 | ||
| 54202G3019LF | Amphenol FCi | CONNECTOR, BERGSTIK 0.10-SMT, DOUBLE ROW,30 GOLD |
| 0 | ||
| 1014760300019LF | Amphenol FCi | MINITEK1.0 RECE. HSG-10147603-00019LF |
| 0 | ||
| 1014760600019LF | Amphenol FCi | MINITEK1.0 R/A SMT HDR-10147606-00019LF |
| 0 | ||
| 10119109226019LF | Amphenol FCi | BS II DR STR |
| 0 | ||
| 10119109240019LF | Amphenol FCi | BS II DR STR |
| 0 | ||
![]() Bisco Industries | 2-019 LM100-70 | O-RINGS | 335 | |||
| 42-1019-LFSM | Birtcher Products | 24 | ||||
| DW-20-19-L-D-900 | Samtec Inc | RoHS : Compliant | 4 | |||
| TSW-130-19-L-T | Samtec Inc | RoHS : Compliant | 2 | |||
![]() Rochester Electronics | NBXDBA019LN1TAG | onsemi | Timer Oscillator, Crystal 125MHz, 250MHz 6-LCC T/R RoHS : Compliant |
| 7,293 | |
| NBXHBA019LN1TAG | onsemi | Timer Oscillator, Crystal 125MHz 6-LCC T/R RoHS : Compliant |
| 5,471 | ||
| LV8019LP-TLM-E | onsemi | Motion Control Electronic, BICMOS, PQCC24 RoHS : Compliant |
| 38,000 | ||
| LV8019LP-TLM-E | SANYO Semiconductor Co Ltd | Motion Control Electronic, BICMOS, PQCC24 RoHS : Compliant |
| 26,000 | ||
![]() Sager | TSW-120-19-L-S | Samtec Inc | Headers & Wire Housings Classic PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 784 | |
| TSW-110-19-L-D | Samtec Inc | Headers & Wire Housings Classic PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 469 | ||
| DW-10-19-L-D-780 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 272 | ||
| LCW-120-19-L-S-300-PR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HTSW-130-19-L-D-LL | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZW-30-19-L-T-200-055 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| LCW-130-19-L-M-300-RP | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| PVS0710D4019-L | Panduit Corp | Wire Ducting & Raceways SIGNS BTR-DNG HIGH VOLTAGE-50/RL | 0 | |||
| EW-50-19-L-S-730 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| LCW-130-19-L-S-300-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| DW-10-19-L-D-735 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| LCW-130-19-L-M-230-PR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| LCW-130-19-L-M-300-RR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HW-10-19-L-D-730-126-LL | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| G09-433A-019-L | Bel Fuse | Modular Connectors / Ethernet Connectors RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | VP8019LF | lb | Electronic Component RoHS : Not Compliant | 345 | ||
| SUM90F1019LE3 | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 275 | |||
![]() Interstate Connecting Components | 449AM001NF2014-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | ||
| 449AN001NF1206-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 449AS001P0806-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 74233-1019LF | Amphenol FCi | 74233-1019LF-USB RoHS : Compliant |
| 0 | ||
| 449AN001NF1409-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 449AS001NF2212-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 449AS001NF1812-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 449AS001NF1006-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 65043-019LF | Amphenol FCi | MINI LATCH HSG .100CC RoHS : Compliant |
| 0 | ||
| 449AM001P0804-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 65817-019LF | Amphenol FCi | MINI LATCH HSG BULKHEAD RoHS : Compliant |
| 0 | ||
| 449AS001NF2216-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 65801-019LF | Amphenol FCi | CLINCHER RECEPT ASSY, TIN RoHS : Compliant |
| 0 | ||
| 66429-019LF | Amphenol FCi | QKE HDR-66429-019LF RoHS : Compliant | 0 | |||
| 449AS001NF2418-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
![]() PEI Genesis | MDM-25SH019L-A174-F222 | ITT Interconnect Solutions |
| 0 | ||
| MDM-9PH019L-A174 | ITT Interconnect Solutions |
| 0 | |||
| MDM-15SH019L | ITT Interconnect Solutions |
| 0 | |||
| MDM-21SH019L-A174-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-37SH019L-A174 | ITT Interconnect Solutions |
| 0 | |||
| MDM-31SH019L | ITT Interconnect Solutions |
| 0 | |||
| MDM-100PH019L-A174 | ITT Interconnect Solutions |
| 0 | |||
| MDM-25PH019L | ITT Interconnect Solutions |
| 0 | |||
| MDM-31PH019L-A174 | ITT Interconnect Solutions |
| 0 | |||
| MDM-51PH019L | ITT Interconnect Solutions |
| 0 | |||
| MDM-100PH019L-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-21SH019L-A174 | ITT Interconnect Solutions |
| 0 | |||
| MDM-31PH019L | ITT Interconnect Solutions |
| 0 | |||
| MDM-25SH019L-A174 | ITT Interconnect Solutions |
| 0 | |||
| MDM-25PH019L-A174-F222 | ITT Interconnect Solutions |
| 0 | |||
![]() Rutronik | SUM90P10-19L-E3 | Vishay Intertechnologies | P-CH 100V 90A 15,6mOhm TO263-3 RoHS : Compliant |
| 800 | |
![]() Chip 1 Exchange | SUM90P10-19L-E3 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 8,538 | ||
| SUM90P1019LE3 | INSTOCK | 3,829 | ||||
| VP8019LF | Bothhand Usa | INSTOCK | 2 | |||
![]() Avnet Abacus | 4310-019LF | CTS Corporation | EMI Filter 5000pF 150VDC Axial ThruHole (Alt: 4310-019LF) RoHS : Compliant | 0 | ||
| 4306-019LF | CTS Corporation | (Alt: 4306-019LF) RoHS : Compliant | 0 | |||
| 65043-019LF | Amphenol Corporation | Conn Housing RCP 36 POS 254mm Crimp ST Cable Mount Bag (Alt: 65043-019LF) RoHS : Compliant | 0 | |||
| 65801-019LF | Amphenol Corporation | Conn Clincher RCP 19 POS 254mm IDT ST Cable Mount Tray (Alt: 65801-019LF) RoHS : Compliant | 0 | |||
| 66987-019LF | Amphenol Corporation | Conn Housing PL 38 POS 254mm Crimp ST Cable Mount (Alt: 66987-019LF) RoHS : Compliant | 0 | |||
| 65846-019LF | Amphenol Corporation | Connector Housing FCI MiniPV 65846 Receptacle 26 Ways 254 mm (Alt: 65846-019LF) RoHS : Compliant | 0 | |||
| 67013-019LF | Amphenol Corporation | Conn Housing F 19 POS 254mm Crimp ST Cable Mount (Alt: 67013-019LF) RoHS : Compliant | 0 | |||
| 67000-019LF | Amphenol Corporation | Conn Housing RCP 19 POS 254mm Crimp ST Cable Mount (Alt: 67000-019LF) RoHS : Compliant | 0 | |||
| NTE03-019LF | YAGEO Corporation | Thermistor ICL NTC 19 Ohm 10 mm 3 A NT (Alt: NTE03-019LF) RoHS : Compliant | 0 | |||
| 65239-019LF | Amphenol Corporation | Conn Housing RCP 38 POS 254mm Crimp ST Cable Mount Bag (Alt: 65239-019LF) RoHS : Compliant | 0 | |||
| 65240-019LF | Amphenol Corporation | Conn Housing RCP 19 POS 254mm Crimp ST Cable Mount Bag (Alt: 65240-019LF) RoHS : Compliant | 0 | |||
| TSW-110-19-L-D | Samtec Inc | (Alt: TSW-110-19-L-D) RoHS : Compliant | 0 | |||
| 10046971-019LF | Amphenol Corporation | (Alt: 10046971-019LF) RoHS : Compliant | 0 | |||
| HTSW-150-19-L-S | Samtec Inc | Pin Header BoardtoBoard WiretoBoard 254 mm 1 Rows 50 Contacts Through Hole HTSW Series (Alt: HTSW-150-19-L-S) RoHS : Compliant | 0 | |||
| DW-10-19-L-D-787 | Samtec Inc | Stacking Board Connector DW Series 20 Contacts Header 254 mm Through Hole 2 Rows (Alt: DW-10-19-L-D-787) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 10188768-1019LF | Amphenol Corporation | HSBP,EXAMAX2 RAR 8*8 WITH SLOT CONTACT (Alt: 10188768-1019LF) RoHS : Compliant | 0 | ||
| 10170425-1SF019LF | Amphenol Corporation | (Alt: 10170425-1SF019LF) RoHS : Compliant | 0 | |||
| 10186538-066F019LF | Amphenol Corporation | (Alt: 10186538-066F019LF) RoHS : Compliant | 0 | |||
| 10188767-1019LF | Amphenol Corporation | HSBP,EXAMAX2 RAOH 8*8 WITH CRUSH RIB (Alt: 10188767-1019LF) RoHS : Compliant | 0 | |||
| 10046971-019LF | Amphenol Corporation | (Alt: 10046971-019LF) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | DMP2019LFK-7 | Diodes Incorporated | (Alt: DMP2019LFK-7) RoHS : Compliant | 0 | ||
![]() Component Electronics, Inc | TSW-150-19-L-S | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 890 | |
| EW-30-19-L-D-800-LL | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 125 | ||
| 019L5 | General Instrument | IN STOCK SHIP TODAY | 80 | |||
| HW-50-19-L-D-800-140 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 70 | ||
![]() EBV Elektronik | SUM90P10-19L-E3 | Vishay Intertechnologies | Power MOSFET P Channel 100 V 90 A 19 MilliOhms TO263 D2PAK 3 Pins Surface Mount (Alt: SUM90P10-19L-E3) RoHS : Compliant | 26,400 | ||
| SQM100P10-19L_GE3 | Vishay Intertechnologies | (Alt: SQM100P10-19L_GE3) RoHS : Compliant | 0 | |||
![]() Master Electronics | LCW-120-19-L-S-300-PR | Samtec Inc | .100 Friction Lock Terminal Strip RoHS : Compliant |
| 0 | |
| HW-10-19-L-D-400-430 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-10-19-L-D-787-430 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-130-19-L-D-LL | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| ZW-30-19-L-T-200-055 | Samtec Inc | Conn Board Stacker HDR 90 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| LCW-130-19-L-M-300-RP | Samtec Inc | .100 Friction Lock Terminal Strip RoHS : Compliant |
| 0 | ||
| TSW-120-19-L-S | Samtec Inc | Pin Header Board-to-Board 2.54 mm 1 Rows 20 Contacts Through Hole TSW Series RoHS : Compliant |
| 0 | ||
| TSW-110-19-L-D | Samtec Inc | CLASSIC PCB HEADER STRIPS RoHS : Compliant |
| 0 | ||
| EW-50-19-L-S-730 | Samtec Inc | Conn Board Stacker HDR 50 POS 18.54mm Stack Height 2.54mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| LCW-130-19-L-S-300-RA | Samtec Inc | .100 Friction Lock Terminal Strip RoHS : Compliant |
| 0 | ||
| DW-10-19-L-D-1055 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-10-19-L-D-735 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-10-19-L-D-780 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-10-19-L-S-875 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-20-19-L-S-845 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W03019LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. N Male to N Female Low Loss Cable Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N female low loss cable using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W03019LF/HS can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03019LF/HS RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3W03019LF/HS is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03019LF/HS can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 4,610 | ||
| PE3W03019LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Female Low Loss Cable 36 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N female low loss cable 36 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 36 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W03019LF/HS-36 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03019LF/HS-36 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3W03019LF/HS-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03019LF/HS-36 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 922 | ||
| PE3W03019LF/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Female Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N female low loss cable 60 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 60 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W03019LF/HS-60 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03019LF/HS-60 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3W03019LF/HS-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03019LF/HS-60 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 922 | ||
| PE3W03019LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Female Low Loss Cable 24 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N female low loss cable 24 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 24 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W03019LF/HS-24 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03019LF/HS-24 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3W03019LF/HS-24 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03019LF/HS-24 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 922 | ||
| PE3W03019LF/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Female Low Loss Cable 12 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N female low loss cable 12 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 12 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W03019LF/HS-12 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03019LF/HS-12 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3W03019LF/HS-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03019LF/HS-12 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 922 | ||
| PE3W23019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. N Male to N Female Bulkhead Cable Using RG400 Coax, LF Solder. PE3W23019LF is a N male to N female bulkhead cable using RG400 coax. This Pasternack N male to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W23019LF N male to N female bulkhead cable assembly is constructed with RG400 coax. | 0 | |||
| PE3W11019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C2019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. 1.0/2.3 Plug to BNC Male Cable Using RG316 Coax, LF Solder. PE3C2019LF is a 1.0/2.3 plug to BNC male cable using RG316 coax. This Pasternack 1.0/2.3 plug to BNC male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm BNC for connector 2. Our plug 1.0/2.3 to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2019LF 1.0/2.3 plug to BNC male cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W20019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. SHV Jack to SHV Plug Cable Using RG223 Coax, LF Solder. PE3W20019LF is a SHV jack to SHV plug cable using RG223 coax. This Pasternack SHV jack to SHV plug cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm SHV for connector 2. Our jack SHV to plug SHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20019LF SHV jack to SHV plug cable assembly is constructed with RG223 coax. | 0 | |||
| PE3W16019LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SHV Jack to Banana Plug Cable Using RG142 Coax with HeatShrink, LF Solder. PE3W16019LF/HS is a SHV jack to Banana plug cable using RG142 coax. This Pasternack SHV jack to Banana plug cable assembly uses a 50 Ohm SHV for connector 1 and a Banana for connector 2. Our jack SHV to plug Banana cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16019LF/HS SHV jack to Banana plug cable assembly is constructed with RG142 coax. | 0 | |||
| PE3W10019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-500, RF Cable Type: SPO-500, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using SPO-500 Coax, LF Solder. PE3W10019LF is a N male to N male cable using SPO-500 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W10019LF N male to N male cable assembly is constructed with SPO-500 coax. | 0 | |||
| PE3W05019LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. N Male to SMA Male Cable Using RG174 Coax with HeatShrink, LF Solder, RoHS. PE3W05019LF/HS is a N male to SMA male cable using RG174 coax. This Pasternack N male to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05019LF/HS N male to SMA male cable assembly is constructed with RG174 coax. | 0 | |||
| PE3C1019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMP Female Cable Using RG178 Coax, LF Solder. PE3C1019LF is a SMP female right angle to SMP female cable using RG178 coax. This Pasternack SMP female right angle to SMP female cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMP for connector 2. SMP right angle to SMP coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to female SMP cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1019LF SMP female right angle to SMP female cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W10019LF/HS | Pasternack Enterprises | 0 | ||||
| PE3W03019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. N Male to N Female Cable Using LMR-240-UF Coax, LF Solder. PE3W03019LF is a N male to N female cable using LMR-240-UF coax. This Pasternack N male to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03019LF N male to N female cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Vyrian | NBVSPA019LN1TAG | onsemi | LVDS Output Clock Oscillator, 60MHz Min, 700MHz Max, 125MHz Nom RoHS : Compliant | 13,384 | ||
| HMC1019LP4E | Analog Devices Inc | Variable Attenuator, 100MHz Min, 30000MHz Max, 6.5dB Insertion Loss-Max, GAAS RoHS : Compliant | 10,438 | |||
| NBXDPA019LN1TAG | onsemi | LVDS Output Clock Oscillator, 125MHz Nom RoHS : Compliant | 9,628 | |||
| HMC1019LP4ETR | Analog Devices Inc | Variable Attenuator, GAAS RoHS : Compliant | 8,391 | |||
| BCM7019LKFEB03G | Broadcom Limited | 8,278 | ||||
| RCWE102019L6FKEA | Vishay Intertechnologies | Fixed Resistor, Metal Glaze/thick Film, 2W, 0.0196ohm, 0.198V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1020 RoHS : Compliant | 8,230 | |||
| BR230D-290A1-28V-019L | Microchip Technology Inc | Electromechanical Relay, 4PDT, 29VDC (Coil), 10A (Contact), 28VDC (Contact), Random, AC/DC Output RoHS : Not Compliant | 7,559 | |||
| NBXHBA019LNHTAG | onsemi | Clock Generator, 125MHz, CMOS, CDSO6 RoHS : Compliant | 7,559 | |||
| NBXDPA019LNHTAG | onsemi | LVDS Output Clock Oscillator, 125MHz Nom RoHS : Compliant | 6,379 | |||
| BR246D-320C1-28V-019L | Microchip Technology Inc | Electromechanical Relay, DPDT, 29VDC (Coil), 10A (Contact), 28VDC (Contact), Random, AC/DC Output RoHS : Not Compliant | 5,794 | |||
| NBXDBA019LNHTAG | onsemi | LVPECL Output Clock Oscillator RoHS : Compliant | 5,453 | |||
| M83536/10-019L | Microchip Technology Inc | Power/Signal Relay, DPDT, Momentary, 0.1A (Coil), 28VDC (Coil), 2800mW (Coil), 10A (Contact), 28VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount | 5,445 | |||
MT5C6401-9LIT![]() | Micron Technology Inc | Standard SRAM, 64KX1, 9ns, CMOS, PDIP22 | 5,212 | |||
| 10046971-019LF | Amphenol Communications Solutions | Card Edge Connector, 50 Contact(s), 2 Row(s), Female, Straight, Solder Terminal | 3,429 | |||
MT5C6401-9LAT![]() | Micron Technology Inc | Standard SRAM, 64KX1, 9ns, CMOS, PDIP22 | 2,611 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |