| Electronic Components Datasheet Search |
|
013B3-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Pasternack Enterprises US | PE3W00136-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using Tinned RG402 Coax., Radio frequency assembly SMA male to SMA male cable 18 inch length using tinned RG402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 18 inch length using tinned RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W00136-18 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W00136-18 is built with RG402 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 18 inch length using tinned RG402 coax. |
| 434 | |
| PE1013-2 | Pasternack Enterprises |
| 57 | |||
| PE3W00138LF-36 | Pasternack Enterprises |
| 51 | |||
| PE2201-30 | Pasternack Enterprises | Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Design: Coupler, Minimum Frequency: 1,000 MHz, Maximum Frequency: 2 GHz, Maximum Input Power: 50 Watt, Coupling Value: 30 dB. Directional 30 dB SMA Coupler From 1 GHz to 2 GHz Rated To 50 Watts. RF coupler part number PE2201-30 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 1,000 MHz and a maximum frequency of 2 GHz. Directional coupler part # PE2201-30 is constructed with a coupling value of 30 dB and a coupler directivity of 25 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.2 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.2 dB and a maximum VSWR of 1.1. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2201-30 directional 30 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts. RoHS : Compliant |
| 23 | ||
| PE3M0133-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL-27478, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 60 inches. Temperature Conditioned SMA Male to N Female Bulkhead Low Loss Cable 60 Inch Length Using PE-P142LL Coax., Pasternack temperature conditioned SMA male to N female bulkhead low loss cable 60 inch length using PE-P142LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0133-60 is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability SMA to N type cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with SMA connection on one end and type N connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to type N cable is a male to female coax assembly. PE3M0133-60 can also be known as a temperature conditioned low loss SMA plug to type N jack cable assembly and will be shipped the same day after it is purchased. SMA plug to N type jack cable assembly PE3M0133-60 is built with PE-P142LL which is a flexible coax. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency SMA male to N type female cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0133-60 can be used in the other direction and will be type N female to SMA male cable assembly. Pasternack high reliability low loss SMA plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for same-day shipment worldwide. Variations of PE44826 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned SMA male to N female bulkhead low loss cable 60 inch length using PE-P142LL coax. |
| 1 | ||
| PE37401-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SSMA Male Cable 36 Inch Length Using RG316-DS Coax., Radio frequency assembly SMA male to SSMA male cable 36 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SSMA male cable 36 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SSMA cable connection on the other. Our SMA to SSMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SSMA cable is a male to male coax assembly, PE37401-36, can also be known as a SMA plug to SSMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SSMA plug cable assembly PE37401-36 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SSMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37401-36 can also be used in the other direction and will be SSMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SSMA male cable 36 inch length using RG316-DS coax. |
| 0 | ||
| PE-W28S001-3 | Pasternack Enterprises | Key Specifications, Waveguide Size 1: WR-28, Flange Size 1: 599/U, Waveguide Size 2: WR-28, Flange Size 2: 599/U, Length: 3 inches, Frequency, Min: 26.5 GHz, Frequency, Max: 40 GHz. WR-28 Instrumentation Grade Straight Waveguide Section 3 Inch Length with 599/U Flange Operating from 26.5 GHz to 40 GHz. PE-W28S001-3 WR-28 waveguide section is straight and is 3 inches long. This 3 inch WR-28 straight waveguide section from Pasternack is instrumentation grade and has a 599/U flange. Our straight WR-28 waveguide section with 599/U flange has a minimum frequency of 26.5 GHz and a maximum frequency of 40 GHz. WR-28 waveguide section PE-W28S001-3 is part of over 40,000 RF, microwave and millimeter wave components. Our instrumentation grade WR-28 straight waveguide section will ship same the day as it is purchased worldwide as with our other RF parts. |
| 0 | ||
| PE33013-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG303/U, RF Cable Type: RG303, RF Cable Impedance: 50 Ohm, Length: 12 inches. TNC Male to TNC Male Cable 12 Inch Length Using RG303 Coax., Radio frequency assembly TNC male to TNC male cable 12 inch length using RG303 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male cable 12 inch length using RG303 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE33013-12, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE33013-12 is built with RG303 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable 12 inch length using RG303 coax. |
| 0 | ||
| PE3C0130LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. TNC Female to N Male Cable Using LMR-240 Coax, LF Solder. PE3C0130LF is a TNC female to N male cable using LMR-240 coax. This Pasternack TNC female to N male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our female TNC to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0130LF TNC female to N male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W00013/HS-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to TNC Male Low Loss Cable 36 Inch Length Using LMR-400 Coax with HeatShrink., Radio frequency assembly N male to TNC male low loss cable 36 inch length using LMR-400 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to TNC male low loss cable 36 inch length using LMR-400 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to TNC cable is a male to male coax assembly, PE3W00013/HS-36, can also be known as a low loss N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3W00013/HS-36 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00013/HS-36 can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Low loss N type plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 36 inch length using LMR-400 coax with heatshrink. |
| 0 | ||
| PE3W00013/HS2-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to TNC Male Low Loss Cable 36 Inch Length Using LMR-400 Coax with Times Microwave Components with Double HeatShrink., Radio frequency assembly N male to TNC male low loss cable 36 inch length using LMR-400 coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 36 inch length using LMR-400 coax with Times Microwave components with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W00013/HS2-36 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3W00013/HS2-36 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00013/HS2-36 can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 36 inch length using LMR-400 coax with Times Microwave components with double heatshrink. |
| 0 | ||
| PE3W00136LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using Tinned RG402 Coax with HeatShrink, LF Solder. PE3W00136LF/HS is a SMA male to SMA male cable using RG402 Tinned coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W00136LF/HS SMA male to SMA male cable assembly is constructed with RG402 Tinned coax. | 0 | |||
| PE3W01300-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. MCX Plug Right Angle to MCX Jack Bulkhead Cable 100 cm Length Using RG174 Coax., Radio frequency assembly MCX plug right angle to MCX jack bulkhead cable 100 cm length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX plug right angle to MCX jack bulkhead cable 100 cm length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MCX cable connection on one end and MCX bulkhead cable connection on the other. Our right angle MCX to MCX cable assemblies have a plug gender on end 1 and jack on end 2. This MCX to MCX cable is a plug to jack coax assembly, PE3W01300-100CM, can also be known as a right angle MCX male to MCX female cable assembly and will be shipped same-day as it is purchased. MCX male to MCX female cable assembly PE3W01300-100CM is built with RG174 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MCX right angle plug to MCX jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01300-100CM can also be used in the other direction and will be MCX jack bulkhead to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to MCX female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to MCX cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug right angle to MCX jack bulkhead cable 100 cm length using RG174 coax. |
| 0 | ||
| PE3W01304/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. BNC Female to UHF Male Cable Using LMR-195 Coax with HeatShrink. PE3W01304/HS is a BNC female to UHF male cable using LMR-195 coax. This Pasternack BNC female to UHF male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm UHF for connector 2. Our female BNC to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01304/HS BNC female to UHF male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W01315-18 | Pasternack Enterprises |
| 0 | |||
![]() Teledyne HiRel | 5962-90658013C![]() | Teledyne HiRel | PROM, UV ERASABLE, 4K X 8, 70 NS ACCESS TIME | 0 | ||
5962-89558013A![]() | Teledyne HiRel | TRANSCEIVER/REGISTER, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-89815013A | Teledyne HiRel | PROM, UV ERASABLE, 2K X 8, REGISTERED, 35 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-90658013A![]() | Teledyne HiRel | PROM, UV ERASABLE, 4K X 8, 70 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-87515013A | Teledyne HiRel | PROM, UV ERASABLE, 8K X 8, 45 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-88518013A![]() | Teledyne HiRel | PROM, 512 X 8, REGISTERED, 30 NS RoHS : Not Compliant | 0 | |||
5962-88705013A![]() | Teledyne HiRel | FLIP-FLOP, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
5962-88656013A![]() | Teledyne HiRel | REGISTER, 9-BIT NONINVERTING RoHS : Not Compliant | 0 | |||
5962-88726013A![]() | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 40 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-87651013A![]() | Teledyne HiRel | PROM, 1K X 8, WITH 3-STATE OUTPUTS, 45 NS RoHS : Not Compliant | 0 | |||
| 5962-88735013A | Teledyne HiRel | PROM, ONE TIME, 2K X 8, REGISTERED, 45 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 82008013A | Teledyne HiRel | PROM, 4K X 8, WITH 3-STATE OUTPUTS, 95 NS ACCESS TIME | 0 | |||
5962-87529013A![]() | Teledyne HiRel | PROM, UV ERASABLE, 2K X 8, REGISTERED, 45 NS SETUP TIME RoHS : Not Compliant | 0 | |||
| 5962-89730013A | Teledyne HiRel | TRANSCEIVER, 8-BIT LATCHED, NONINVERTING, WITH TS OUTPUTS, TTL-COMPATIBLE RoHS : Not Compliant | 0 | |||
| 5962-87539013A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT, 25 NS RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | C0603C0G101-300JNP | VENKEL LTD | Chip Capacitor;0603;C0G;100V;30pF;�5% RoHS : Compliant | 116,000 | ||
| C0201HQN500-130GNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;50V;13pF;�2% RoHS : Compliant | 0 | |||
| C0402C0G500-130GNP | VENKEL LTD | Chip Capacitor;0402;C0G;50V;13pF;�2% RoHS : Compliant | 0 | |||
| C0402HQN101-300JNP | VENKEL LTD | High-Q NP0 Capacitor;0402;HQN;100V;30pF;�5% RoHS : Compliant | 0 | |||
| C0505HQN101-3R0ANE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;100V;3pF;�0.05pF RoHS : Compliant | 0 | |||
| C0505HQN101-3R8CNE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;100V;3.8pF;�0.25pF RoHS : Compliant | 0 | |||
C0603C0G101-390KNP![]() | VENKEL LTD | Chip Capacitor;0603;C0G;100V;39pF;�10% RoHS : Compliant | 0 | |||
| C0603HQN101-3R5BNP | VENKEL LTD | High-Q NP0 Capacitor;0603;HQN;100V;3.5pF;�0.1pF RoHS : Compliant | 0 | |||
C0805C0G101-390GNP![]() | VENKEL LTD | Chip Capacitor;0805;C0G;100V;39pF;�2% RoHS : Compliant | 0 | |||
C0805C0G101-3R9CNP![]() | VENKEL LTD | Chip Capacitor;0805;C0G;100V;3.9pF;�0.25pF RoHS : Compliant | 0 | |||
C0805C0G501-390JNE![]() | VENKEL LTD | HV Chip Capacitor;0805;C0G;500V;39pF;�5% RoHS : Compliant | 0 | |||
| C0805HQN101-3R0CNP | VENKEL LTD | High-Q NP0 Capacitor;0805;HQN;100V;3pF;�0.25pF RoHS : Compliant | 0 | |||
| C1111HQN101-390FNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;100V;39pF;�1% RoHS : Compliant | 0 | |||
| C1111HQN101-3R9BNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;100V;3.9pF;�0.1pF RoHS : Compliant | 0 | |||
| C1111HQN501-3R0ANE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;500V;3pF;�0.05pF RoHS : Compliant | 0 | |||
![]() Vyrian | XGL4030-131MEC | Coilcraft Inc | RoHS : Compliant | 33,250 | ||
| Y00131K00000F0L | Vishay Precision Group Inc | Fixed Resistor, Metal Foil, 2W, 1000ohm, 500V, 1% +/-Tol RoHS : Not Compliant | 3,950 | |||
| Y00131M00000Q9L | Vishay Precision Group Inc | Fixed Resistor, Metal Foil, 1W, 1000000ohm, 500V, 0.02% +/-Tol | 3,250 | |||
| 0139-0-15-01-30-14-04-0 | Mill-max Mfg | 3,000 | ||||
| Y4013610R000B9W | Vishay Precision Group Inc | 3,000 | ||||
| XM2F-2540-132L | OMRON Corporation | D Subminiature Connector, 25 Contact(s), Female, 0.109 inch Pitch, Solder Terminal, #4-40, Receptacle | 2,700 | |||
| D01-395226000132113 | Intel Corporation | 1,650 | ||||
M27C1001-35B6X![]() | STMicroelectronics | RoHS : Compliant | 820 | |||
M38510/13301BEX![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, CDIP16 | 780 | |||
M27C4001-35C6![]() | STMicroelectronics | RoHS : Compliant | 490 | |||
M27C1001-35XB1![]() | STMicroelectronics | RoHS : Compliant | 390 | |||
M27C4001-35XL6![]() | STMicroelectronics | RoHS : Not Compliant | 290 | |||
| ST70134-ST70134A | STMicroelectronics | 280 | ||||
XQ4013XL-3PQ240N![]() | AMD Xilinx | Field Programmable Gate Array, 576 CLBs, 10000 Gates, 166MHz, 1368-Cell, CMOS, PQFP240 RoHS : Not Compliant | 2 | |||
XQ4013XL-3PQG240N![]() | AMD Xilinx | Field Programmable Gate Array, 576 CLBs, 10000 Gates, 166MHz, CMOS, PQFP240 RoHS : Compliant | 2 | |||
![]() Win Source Electronics | PDS3100-13 | Diodes Incorporated | DIODE SCHOTTKY 100V 3A POWERDI5 RoHS : Compliant |
| 173,742 | |
ULN2004D1013TR![]() | STMicroelectronics | IC PWR RELAY 7NPN 1:1 16SO RoHS : Compliant |
| 114,150 | ||
| DMP3013SFV | Diodes Incorporated | P-Channel 30V 10A 1.25W Surface Mount SOT23-6 MOSFET |
| 100,000 | ||
ADS1013IDGSR![]() | Texas Instruments | IC ADC 12BIT I2C 3.3KSPS 10MSOP RoHS : Compliant |
| 35,000 | ||
| B150-13-F | Diodes Incorporated | DIODE SCHOTTKY 50V 1A SMA RoHS : Compliant |
| 27,889 | ||
| L6205D013 | STMicroelectronics | Dual Full Bridge Motor Driver 2.8A 52V 20-Pin SOIC |
| 20,000 | ||
LM20133MH/NOPB![]() | Texas Instruments | IC REG BUCK ADJ 3A SYNC 16TSSOP RoHS : Compliant |
| 13,590 | ||
LT1013DD![]() | Texas Instruments | Op Amp Dual Low Offset Voltage Amplifier ±15V/30V 8-Pin SOIC Tube / IC OPAMP GP 1MHZ 8SOIC RoHS : Compliant |
| 10,000 | ||
| AW2013DNR | Shanghai Awinic Technology | LED Driver 2.8V 10-Pin DFN EP T/R |
| 9,000 | ||
| S29AL016J70TFI013 | Cypress Semiconductor | IC FLASH 16M PARALLEL 48TSOP RoHS : Compliant |
| 8,840 | ||
LM536013QDSXTQ1![]() | Texas Instruments | IC REG BUCK 3.3V 1A 10WSON / Buck Switching Regulator IC Positive Fixed 3.3V 1 Output 1A 10-WFDFN Exposed Pad RoHS : Compliant |
| 4,590 | ||
A5973D013TR![]() | STMicroelectronics | IC REG BUCK ADJ 2A 8HSOP / Conv DC-DC 4V to 36V Synchronous Step Down Single-Out 1.235V to 35V 2A Automotive 8-Pin HSOP EP T/R RoHS : Compliant |
| 4,510 | ||
| S29GL064S70FHI013 | Cypress Semiconductor | IC FLASH 64MBIT PARALLEL 64FBGA / FLASH - NOR Memory IC 64Mb (8M x 8, 4M x 16) Parallel 70 ns 64-FBGA (13x11) RoHS : Compliant |
| 1,600 | ||
| 900-13767-0030-000 | NVIDIA | Jetson Nano 8G |
| 600 | ||
| ADMV1013ACC | Analog Devices Inc | Upconverter 24GHz to 44GHz Wideband LFCSP-40 |
| 400 | ||
![]() Wuhan P&S | MC14013BDR2G![]() | onsemi | Dual Type D Flip Flop RoHS : Compliant |
| 107,500 | |
UC3843BD1013TR![]() | STMicroelectronics | CURRENT MODE PWM CONTROLLER RoHS : Compliant |
| 10,000 | ||
| ULQ2003D1013TR | STMicroelectronics | - RoHS : Compliant |
| 10,000 | ||
ULN2003D1013TR![]() | STMicroelectronics | Seven Darlington array RoHS : Compliant |
| 10,000 | ||
| AR0135CS2C00SUEA0-DPBR | onsemi | 1.2MP Global Shutter CMOS Image Sensor RoHS : Compliant |
| 2,182 | ||
| AF0130CSSM30SMKA1-CP2 | onsemi | 1MP?1/3?CIS?SO RoHS : Compliant |
| 800 | ||
| AR0135CS2M00SUEAH3-GEVB | onsemi | - RoHS : Compliant |
| 2 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |