|
APPLICATION
The panel meters type MA12L, MA16L, MA17L, MA19L are designed
to measure current or DC voltage. Magnetoelectric meters with built-in
rectifier type MA12L(P), MA17L(P), MA19L(P). are intended for measuring
the effective currents and alternating current with sinusoidal
waveform. Measurement of the current and voltage of the non-sinusoidal
waveform is subject to a large error proportional to the degree
of deformation of the waveform. what follows from the principle of
measuring the rectifier device. which reacts to the average value of
the straight-run. but it is calibrated like this. to indicate the effective
value of the sinusoidal waveform. Where the noninusoidal course is
appropriately characterized. this measurement error is calculated.
Therefore, the requirements for the influence of the shape of the curve
for the medium-responsive instrument (straightened) are not specified
in the standard EN 60051-2.
MA12L, MA16L, MA17L, MA19L meters are suitable for mounting in
a panel of thickness not exceeding 25 mm in the holes according to
Figures 2 and 4.
|