1 Features
. Low distortion:
. 84-dBc HD2 at 10 MHz, RL = 1 kΩ
. 99-dBc HD3 at 10 MHz, RL = 1 kΩ
. Low noise:
. 15-pA/√Hz noninverting current noise
. 14-pA/√Hz inverting current noise
. 1.1-nV/√Hz voltage noise
. High slew rate: 6000 V/μs (G = 5, VO = 20 VPP)
. Wide bandwidth: 305 MHz (G = 2, RL = 100 Ω)
. High output current drive: ±310 mA
. Wide supply range: ±5 V to ±16 V
. Power-down feature: THS3095 only

2 Applications
• High-voltage arbitrary waveform generators
• Pin Driver
• Power-FET drivers
• Source measurement unit (SMU)
• High capacitive load piezo element drivers

3 Description
The THS3091 and THS3095 (THS309x) are highvoltage,
low-distortion, high-speed, current-feedback
amplifiers that operate over a wide supply range
of ±5 V to ±16 V. These devices are an excellent
choice for applications that require large, linear output
signals, such as pin drivers, power-FET drivers, and
arbitrary waveform generators.
The THS3095 features a power-down pin (PD) that
puts the amplifier into a low-power standby mode, and
lowers the quiescent current from 9.5 mA to 500 μA.
The wide, 32.V supply range, 6000.V/μs slewrate,
and 310.mA output current drive make the
THS309x an excellent choice for high-voltage
arbitrary-waveform-driver applications. Moreover, with
the ability to handle large voltage swings driving
into low-resistance and high-capacitance loads while
maintaining good settling time performance, these
devices are an excellent choice for pin-driver and
power-FET driver applications.
The THS309x are offered in an 8.pin SOIC (DDA)
PowerPAD™ integrated circuit package. The THS3091
is also offered in an 8.pin HVSSOP (DGN) package.