Features
■ One half bridge for 7.4 A load (Ron = 150 mΩ)
■ Two half bridges for 5 A load (Ron = 200 mΩ)
■ Two highside drivers for 1.25 A load
(Ron = 800 mΩ)
■ Programmable softstart function to drive loads
with higher inrush currents (i.e.current > 7.4A,
>5A, >1.25A)
■ Very low current consumption in standby mode
(IS < 3μA, typ. Tj ≤ 85°C)
■ All outputs short circuit protected
■ Current monitor output for all highside drivers
■ All outputs over temperature protected
■ Open-load diagnostic for all outputs
■ Overload diagnostic for all outputs
■ Programmable PWM control of all outputs
■ Charge pump output for reverse polarity
protection

Applications
■ Rear door actuator driver with bridges for door
lock and safe lock and two 5W or 10W - light
bulbs.