1FEATURES
234· PCM2900B: Without S/PDIF
· PCM2902B: With S/PDIF
· On-Chip USB Interface:
– With Full-Speed Transceivers
– Fully Compliant with USB 2.0 Specification
– Certified by USB-IF
– Partially Programmable Descriptors (1)
– USB Adaptive Mode for Playback
– USB Asynchronous Mode for Record
– Bus Powered
· 16-Bit Delta-Sigma ADC and DAC
· Sampling Rate:
– DAC: 32, 44.1, 48 kHz
– ADC: 8, 11.025, 16, 22.05, 32, 44.1, 48 kHz
· On-Chip Clock Generator with Single 12-MHz
Clock Source
· Single Power Supply:
– 5 V Typical (V BUS)
· Stereo ADC:
– Analog Performance at V BUS = 5 V:
– THD+N = 0.01%
– SNR = 89 dB
– Dynamic Range = 89 dB
– Decimation Digital Filter:
– Passband Ripple = ±0.05 dB
– Stop-Band Attenuation = 65 dB
– Single-Ended Voltage Input
– Antialiasing Filter Included
– Digital HPF Included
· Stereo DAC:
– Analog Performance at VBUS = 5 V:
– THD+N = 0.005%
– SNR = 96 dB
– Dynamic Range = 93 dB
– Oversampling Digital Filter:
– Passband Ripple = ±0.1 dB
– Stop-Band Attenuation = –43 dB
– Single-Ended Voltage Output
– Analog LPF Included
· Multifunctions:
– Human Interface Device (HID) Function:
– Volume and Mute Controls
– Suspend Flag Function
· 28-Pin SSOP Package

APPLICATIONS
· USB Audio Speaker
· USB Headset
· USB Monitor
· USB Audio Interface Box

DESCRIPTION
The PCM2900B/2902B is Texas Instruments'
single-chip, USB, stereo audio codec with a
USB-compliant full-speed protocol controller and
S/PDIF (PCM2902B only). The USB protocol controller requires no software code, but the USB
descriptors can be modified in some areas (for
example, vendor ID and/or product ID). The
PCM2900B/2902B employs SpAct™ architecture, TI's
unique system that recovers the audio clock from
USB packet data. On-chip analog PLLs with SpAct
architecture enable playback and record with low
clock jitter as well as independent playback and
record sampling rates.