Features
• Programmable for stand alone operation with
Applied Motion’s easy to use Si Programmer™
Windows software (software and programming
cable included)
• Can be operated in real time from a host PC or
PLC using Applied Motion’s Si Command Language
™ (SCL)
• Can be networked with all other Si™ products via
Applied Motion’s SiNet™ Hub
• 110 or 220 AC input, switch selectable
• 25 VDC and 5 VDC output voltages
• 8 optically isolated, 5–24 VDC, user programmable
inputs
• 3 optically isolated, 24 VDC, outputs
• High speed, differential step & direction outputs
interface easily to step and servo motor drives
• Communication via RS232
• Screw terminal connector blocks for power and I/O
RJ11 for RS232 port
• Optional operator terminal (MMI) either standard
or backlit
• Eight Applied Motion recommended pulse and
direction Stepper drives and two pulse and direction
Servo amplifiers
• CE and TUV compliant
Description
The Si-100 is a programmable motor control suitable
for a wide range of motion control applications.
It includes Applied Motion’s easy to use
Si Programmer™ Windows software for the rapid
development of stand-alone motion control programs.
The Si-100 can also be commanded in real
time from a host PC or PLC, using the Si Command
Language™ (SCL).
For multi-axis applications, up to eight Applied Motion
Si™ products (Stepper or Servo) can be networked
using the SiNet™ Hub, fulfilling the exact
requirements of your application.
The Si-100 includes 8 optically isolated programmable
inputs for triggering, branching, position
sensing and end of travel detection. 3 optically isolated
programmable outputs can send signals to
other electronic devices and activate relays. High
speed, differential step & direction outputs are provided
for easy interfacing to industry popular step
and servo motor drives.