Description
Typical Caliper “Moderate” Release Liner Silicone-coated clear PET Film 2.0 mils (50 microns) Adhesive Pressure sensitive Neutral Acrylic 1.0 mils (25 microns) “Easy” Release Liner Silicone-coated clear PET Film 2.0 mils (50 microns) Product Properties1: Adhesion to Stainless Steel Minimum 20 oz/inch width (567 g/25 mm) Liner Release Maximum 20 gm/inch width (20 g/25 mm) Adhesive Caliper (without release liners) Average 25.4 ± 1.3 microns 1 Test methods available upon request. Product Roll Dimensions: Product supplied on 3-inch (7.6 cm) diameter plastic cores. Width, Maximum 48 inches (122 cm) + 1/16 inch (1.6 mm) Length, Maximum 1640 yards (1500 meters) + 2% Splice Frequency Maximum 3 per 500 LY (457 meters) Maximum 5 per 1000 LY (914 meters) Maximum 7 per 1500 LY (1372 meters) Splices are intended for continuous processing. Shelf Life & Recommended Storage Conditions: Product as supplied in original packaging will maintain stated test properties for a period of one [1] year from date stamped on shipping container when stored at temperatures of 50-80F (10-27C) and a relative humidity of 40-60 percent. Please see reverse side for important product, safety and warranty information.