Description

The A1180, A1181, A1182, and A1183 devices are sensitive, two-wire, unipolar, Hall effect switches. The operate point, BOP, can be field-programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor switching performance, by effectively accounting for variations caused by mounting tolerances for the device and the target magnet.

Features and Benefits

▪ Chopper stabilization

  ▫ Low switchpoint drift over operating temperature range

  ▫ Low sensitivity to stress

▪ Field programmable for optimized switchpoints

▪ On-chip protection

  ▫ Supply transient protection

  ▫ Reverse-battery protection

  ▫ On-board voltage regulator

  ▫ 3.5 to 24 V operation