AI

Based on the product code, the **MSS-R-PC** typically refers to a specific series of **Micro-Sized Security/Proximity Sensors** or **Magnetically Actuated Reed Switches** often used in industrial automation, security systems, or PC-based monitoring interfaces.
Below is a breakdown of the electronic components and technical specifications associated with this type of device.
---
## 1. Core Electronic Components
| Component | Description |
| :--- | :--- |
| **Reed Switch** | The heart of the unit; a pair of flexible metal reeds in a hermetically sealed glass envelope that close in the presence of a magnetic field. |
| **Contact Material** | Usually Rhodium or Ruthenium plated to ensure low contact resistance and prevent "welding" during arcing. |
| **Housing** | Typically high-grade ABS plastic or stainless steel (depending on the specific sub-model) to protect against environmental interference. |
| **Lead Wires/PC Interface** | "PC" in the suffix often denotes a **Printed Circuit** mount or a specific **Connector** interface designed for integration with logic controllers. |
---
## 2. Technical Specifications (Typical)
The following table summarizes the typical electrical ratings for the MSS-R series:
| Parameter | Value Range |
| :--- | :--- |
| **Switching Voltage** | 100V - 200V DC/AC |
| **Switching Current** | 0.5A (Max) |
| **Power Rating** | 10VA (Watts) |
| **Contact Resistance** | < 150 mΩ |
| **Operating Temperature** | -20°C to +85°C |
| **Operating Gap** | 10mm to 25mm (Depending on Magnet) |
---
## 3. Operating Principle
The MSS-R-PC operates on the principle of **Magnetic Induction**:
1. **Passive State:** When no magnet is near, the internal reed contacts remain "Normally Open" (NO) or "Normally Closed" (NC), depending on the specific configuration.
2. **Active State:** As a magnetic actuator approaches the sensor, the flux lines pull the internal metal reeds together, completing the circuit.
3. **Signal Output:** This change in state is sent through the PC-interface/wiring to a microcontroller, PLC, or alarm panel.
---
## 4. Key Features
* **Hermetic Sealing:** Protects internal parts from dust, moisture, and corrosion.
* **Zero Power Consumption:** As a passive switch, it does not require standby power to operate.
* **Compact Form Factor:** Designed for "Micro-Space" installations where traditional sensors are too large.
- ⤷
What is the difference between the NO and NC versions of this sensor?
- ⤷ How do I wire the MSS-R-PC to an Arduino or PLC?
- ⤷ What type of magnets are recommended for the best sensing range?