5HTP8-R
AI

The **5HTP8-R** is a specific model of a **Miniature Cartridge Fuse**, typically manufactured by companies like **Bel Fuse Inc.** This part is widely used in electronic circuits to provide overcurrent protection.
---
## Technical Specifications
The following table summarizes the key electrical and physical characteristics of the 5HTP8-R:
| Feature | Specification |
| :--- | :--- |
| **Type** | Time-Lag (Slow Blow) |
| **Current Rating** | 8 Amperes (8A) |
| **Voltage Rating (AC)** | 250V AC |
| **Material** | Glass Body with Brass Caps |
| **Physical Size** | 5mm x 20mm |
| **Termination Style** | Axial Leaded (R suffix often denotes pigtail leads) |
| **Interrupting Rating** | 1500A @ 250V AC |
---
## Detailed Breakdown of the Part Number
Understanding the nomenclature helps in identifying the component's behavior:
1. **5HTP**:
* **5**: Refers to the physical diameter (5mm).
* **H**: High Breaking Capacity (usually involving a ceramic tube or specific sand-filling, though many in this series use glass).
* **T**: Time-delay (Slow Blow) characteristic. This means it can withstand brief surges (like motor startups) without blowing immediately.
* **P**: Indicates Lead-Free/RoHS compliance.
2. **8**: Represents the amperage rating (8 Amps).
3. **-R**: Indicates the component is **RoHS Compliant**. In some contexts, it also refers to the packaging or the "Axial Lead" (pigtail) configuration, allowing it to be soldered directly onto a PCB rather than placed in a fuse holder.
---
## Applications and Usage
The 5HTP8-R is designed for circuits where high inrush currents are expected.
* **Power Supplies:** Protecting the primary side of AC/DC adapters.
* **Consumer Electronics:** Used in televisions, chargers, and audio equipment.
* **Industrial Controls:** Protecting small motors or actuators that require a "Time-Lag" to start up.
* **PCB Protection:** Because of its axial leads, it is ideal for permanent installation on printed circuit boards where space is limited.
---
## Safety and Standards
This component is typically certified by international safety agencies to ensure reliable operation:
* **UL/CSA:** North American safety standards.
* **VDE/Semko:** European safety standards.
* **PSE:** Japanese safety compliance.
- ⤷
What is the difference between a 'Fast-Acting' fuse and the 'Time-Lag' 5HTP8-R?
- ⤷ Can a 5HTP8-R be replaced with a standard 5x20mm glass fuse without leads?
- ⤷ What are the soldering temperature precautions for axial leaded fuses?