Electronic Components Datasheet Search |
|
AT49F002 Datasheet(PDF) 1 Page - ATMEL Corporation |
|
|
AT49F002 Datasheet(HTML) 1 Page - ATMEL Corporation |
1 / 20 page Features • Single-voltage Operation – 5V Read – 5V Reprogramming • Fast Read Access Time – 55 ns • Internal Program Control and Timer • Sector Architecture – One 16K Bytes Boot Block with Programming Lockout – Two 8K Bytes Parameter Blocks – Four Main Memory Blocks (One 32K Bytes, Three 64K Bytes) • Fast Erase Cycle Time – 4 Seconds • Byte-by-Byte Programming – 20 µs/Byte Typical • Hardware Data Protection • DATA Polling for End of Program Detection • Low Power Dissipation – 25 mA Active Current – 100 µA CMOS Standby Current • Typical 10,000 Write Cycles • Green (Pb/Halide-free) Packaging Option 1. Description The AT49F002A(N)(T) is a 5-volt only in-system reprogrammable Flash memory. Its 2 megabits of memory is organized as 262,144 words by 8 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the device offers access times to 55 ns with power dissipation of just 137 mW over the industrial temperature range. When the device is deselected, the CMOS standby current is less than 100 µA. For the AT49F002AN(T) pin 1 for the PLCC package and pin 9 for the TSOP package are no connect pins. To allow for simple in-system reprogrammability, the AT49F002A(N)(T) does not require high input voltages for programming. Five-volt-only commands determine the read and programming operation of the device. Reading data out of the device is sim- ilar to reading from an EPROM; it has standard CE, OE, and WE inputs to avoid bus contention. Reprogramming the AT49F002A(N)(T) is performed by erasing a block of data and then programming on a byte-by-byte basis. The byte programming time is a fast 20 µs. The end of a program cycle can be optionally detected by the DATA polling feature. Once the end of a byte program cycle has been detected, a new access for a read or program can begin. The typical number of program and erase cycles is in excess of 10,000 cycles. The device is erased by executing the erase command sequence; the device inter- nally controls the erase operations. There are two 8K byte parameter block sections, four main memory blocks, and one boot block. The device has the capability to protect the data in the boot block; this feature is enabled by a command sequence. The 16K-byte boot block section includes a repro- gramming lock out feature to provide data integrity. The boot sector is designed to contain user secure code, and when the feature is enabled, the boot sector is pro- tected from being reprogrammed. 2-megabit (256K x 8) 5-volt Only Flash Memory AT49F002A AT49F002AN AT49F002AT AT49F002ANT 3354F–FLASH–2/05 |
Similar Part No. - AT49F002 |
|
Similar Description - AT49F002 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |