Electronic Components Datasheet Search |
|
Z51F0811 Datasheet(PDF) 22 Page - Zilog, Inc. |
|
|
Z51F0811 Datasheet(HTML) 22 Page - Zilog, Inc. |
22 / 52 page UM024205-1012 Configure the Z8051 OCD and Z51F0811 Evaluation Z51F0811 Evaluation Kit User Manual 15 Configure the Z8051 OCD and Z51F0811 Evaluation Board Observe the following procedure to set up and configure the Z8051 On-Chip Debugger and the Z51F0811 Board. Steps number 1 to 4 present the power-up sequence. Carefully follow these steps to avoid encountering an improper connection or disconnection. 1. Connect the Z8051 On-Chip Debugger (OCD) to the host PC’s USB port. 2. Connect one end of the 10-circuit cable to the Z8051 OCD. 3. Connect the other end of the 10-circuit cable connector to the Z51F0811 Board’s J1 and J2 connectors. Pin 1 of the cable connector is indicated by a red stripe, as shown in Figure 12. 4. Using the second USB-to-Mini-B cable, connect the standard USB end to the host PC’s USB port. 5. Connect the other end of this second Mini-B cable to the Z51F0811 Board’s P1 con- nector to apply power to the Board. Note that the green LED D4 is ON; see Figure 13. Figure 14 shows an example of a completed hardware and software setup. Figure 12. Connecting the 10-Circuit Cable to the Board Caution: |
Similar Part No. - Z51F0811 |
|
Similar Description - Z51F0811 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |