 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
WM9711 Datasheet(PDF) 55 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM9711 Datasheet(HTML) 55 Page - Wolfson Microelectronics plc |
|
|
55 / 66 page  Production Data WM9711L w PD Rev 4.1 April 2004 55 Register 26h is for power management according to the AC’97 specification. Note that the actual state of many circuit blocks depends on both register 24h AND register 26h. REG ADDR BIT LABEL DEFAULT DESCRIPTION REFER TO 14 PR6 Disables HPOUTL, HPOUTR and OUT3 Buffer 13 PR5 Disables Internal Clock 12 PR4 Disables AC-link interface (external clock off) 11 PR3 Disables VREF, analogue mixers and outputs 10 PR2 Disables analogue mixers, LOUT2, ROUT2 (but not VREF) 9 PR1 Disables Stereo DAC and AUXDAC 8 PR0 see note Disables audio ADCs and input Mux 3 REF inverse of PR2 Read-only bit, Indicates VREF is ready 2 ANL inverse of PR3 Read-only bit, indicates analogue mixers are ready 1 DAC inverse of PR1 Read-only bit, indicates audio DACs are ready 26h 0 ADC inverse of PR0 Read-only bit, indicates audio ADCs are ready Power Management Note: PR6 to PR0 default to 1 if pin 47 is held high during reset, otherwise they default to 0. Register 28h is a read-only register that indicates to the driver which advanced AC’97 features the WM9711L supports. REG ADDR BIT LABEL DEFAULT DESCRIPTION REFER TO 15:14 ID 00 Indicates that the WM9711L is configured as the primary codec in the system. 11:10 REV 01 Indicates that the WM9711L conforms to AC’97 Rev2.2 9 AMAP 0 Indicates that the WM9711L does not support slot mapping 8 LDAC 0 Indicates that the WM9711L does not have an LFE DAC 7 SDAC 0 Indicates that the WM9711L does not have Surround DACs 6 CDAC 0 Indicates that the WM9711L does not have a Centre DAC 3 VRM 0 Indicates that the WM9711L does not have a dedicated, variable rate microphone ADC 2 SPDIF 1 Indicates that the WM9711L supports SPDIF output 1 DRA 0 Indicates that the WM9711L does not support double rate audio 28h 0 VRA 1 Indicates that the WM9711L supports variable rate audio Intel’s AC’97 Component Specification, Revision 2.2, page 59 Register 2Ah controls the SPDIF output and variable rate audio. REG ADDR BIT LABEL DEFAULT DESCRIPTION REFER TO 10 SPCV 1 (valid) SPDIF validity bit (read-only) 5:4 SPSA 01 (slots 6, 9) Controls SPDIF slot assignment. 00=slots 3 and 4, 01=6/9, 10=7/8, 11=10/11 2 SEN 0 (OFF) Enables SPDIF output enable 2Ah 0 VRA 0 (OFF) Enables variable rate audio Digital Audio (SPDIF) Output Registers 2Ch, 2Eh 32h and control the sample rates for the stereo DAC, auxiliary DAC and audio ADC, respectively. REG ADDR BIT LABEL DEFAULT DESCRIPTION REFER TO 2Ch all DACSR BB80h Controls stereo DAC sample rate 2Eh all AUXDACSR BB80h Controls auxiliary DAC sample rate 32h all ADCSR BB80h Controls audio ADC sample rate Variable Rate Audio / Sample Rate Conversion Note: The VRA bit in register 2Ah must be set first to obtain sample rates other than 48kHz |
Similar Part No. - WM9711 |
|
Similar Description - WM9711 |
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.COM |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
