Application Specification

114--13033

LOC B

1

of 7

E

2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company

All Rights Reserved

TE logo is a trademark.

*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.

TOOLING ASSISTANCE CENTER 1--800--722--1111

PRODUCT INFORMATION 1--800--522--6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com

AUGAT* HOLTITE* Sockets

14 MAR 11 Rev B

All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and

inches]. Unless otherwise specified, dimensions have a tolerance of +0.13 [+.005] and angles have a tolerance of +2_.

Figures and illustrations are for identification only and are not drawn to scale.

1. INTRODUCTION

This specification covers the requirements for application of AUGAT HOLTITE Sockets. These manually

applied or reel--mounted machine applied solderless spring sockets are designed to be contained within the

barrel of a plated--through hole. The design allows the socket and plated--through hole to form a zero--profile

component socket which provides an interconnect for a broad range of electronic parts and components. The

sockets are available in a variety of different series and sizes based on printed circuit (pc) board hole diameter.

They are also available normally on mylar strips which can be reeled on custom socket patterns for ease of

application.

When corresponding with TE Connectivity (TE) Personnel, use the terminology provided in this specification to

facilitate your inquiries for information. Basic terms and features of this product are provided in Figure 1.

Figure 1

Fingers

Groove

Transition Region

Locking Collar

Entry Area

2. REFERENCE MATERIAL

2.1. Revision Summary

S

Updated document to corporate requirements

S

New logo

2.2. Customer Assistance

Reference Part Number 6--1437514--7 and Product Code E354 are representative numbers of AUGAT

HOLTITE Sockets. Use of these numbers will identify the product line and expedite your inquiries through a

service network established to help you obtain product and tooling information. Such information can be

obtained through a local TE Representative or, after purchase, by calling the Tooling Assistance Center or

Product Information number at the bottom of this page.

NOTE

i