![]() |
Electronic Components Datasheet Search |
|
PL904XXX Datasheet(PDF) 8 Page - Micrel Semiconductor |
|
|
PL904XXX Datasheet(HTML) 8 Page - Micrel Semiconductor |
8 / 15 page ![]() Micrel, Inc. PL904xxx September 11, 2015 8 Revision 1.0 tcghelp@micrel.com or (408) 955-1690 Power Supply Filtering Recommendations Preferred filter, using Micrel’s MIC94300 or MIC94310 Ripple Blocker™: Alternative, traditional filter, using a ferrite bead: VDDO and VDD pins can be connected directly to the VDD power plane. For VDDA and VDDI it is recommended to use a power supply filter as described above. Application Information Power Supply Decoupling Place the smallest value decoupling capacitor (4.7nF above) between the VDD and VSS pins, as close as possible to those pins and on the same side of the PCB as the IC. The shorter the physical path from VDD to the capacitor and back from the capacitor to VSS, the more effective the decoupling. Use one 4.7nF capacitor for each VDD pin on the PL904xxx. The impedance value of the ferrite bead (FB) needs to be between 240Ω and 600Ω with a saturation current ≥150mA. VDDO pins connect directly to the VDD plane. All VDD pins on the PL904xxx connect to VDD after the power supply filter. A Ripple Blocker has advantages over using a ferrite bead. A Ripple Blocker filters much lower frequencies than a ferrite bead, at least two decades lower. Most ferrite beads cause peaking in the noise filter frequency response, so some noise frequencies are actually made worse. The Ripple Blocker is designed to not have any noise peaking. Output Traces Design the traces for the output signals according to the output logic requirements. If LVCMOS is unterminated, add a 30Ω resistor in series with the output, as close as possible to the output pin, and start a 50Ω trace on the other side of the resistor. For differential traces, you can either use a differential design or two se parate 50Ω traces. For EMI reasons, it is better to use a differential design. LVDS can be AC-coupled or DC-coupled to its termination. |
Similar Part No. - PL904XXX |
|
Similar Description - PL904XXX |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |