ET-

MD16SD1

HD/SD-SDI Interface Board

As­ of­ September­ 2011

SFL11A017

1 / 1

Weights­ and­ dimensions­ shown­ are­ approximate.­ Specifications­ subject­ to­ change­ without­ notice.

SDI IN 1

SDI IN 2

SDI OUT

18 7 ( 7- 3 / 8 )

Specifications

Power supply:

Provided from the projector

Terminals:

SERIAL IN (SDI IN 1/2)

BNC ×2

SMPTE 259M-C compliant: 480i, 576i

SMPTE 292M compliant: 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i,

1080/25p, 1080/25psf, 1080/24p, 1080/24psf, 1080/30p, 1080/30psf

SERIAL OUT (SDI OUT)

BNC × 1, active through

Dimensions (W × H × D):

187 × 30 × 110 mm (7-3/8˝ × 1-3/16˝ × 4-11/32˝)

Weight:

Approx. 160 g* (3.3 oz*)

Operating temperature:

0°– 40°C (32°–104°F)

Operating humidity:

10%– 80% (no condensation)

Applicable projector:

PT-EX16K

* Average­ value.­ May­ differ­ depending­ on­ models.

NOTE:­ Use­ connection­ cables­ of­ 5CFB­ or­ higher­ (ex.­ 5CFB,­ 7CFB,­ 5CFTX,­ etc.).

unit­ : mm­ (inch)

NOTE:­ This­ illustration­ is­ not­ drawn­ to­ scale.

Dimensions

­­­Description

This board is designed for use with a Panasonic projector. It enables the input of a HD-SDI (SMPTE 292M-compli-

ant) and SD-SDI (SMPTE 259M-C).