ET-PFD310

Frame

As of April 2013

SFD10A009-1

1 / 1

596 ( 23-15/32)

610 ( 24-1/32)

Specifications

Dimensions (W × H × D):

596 × 322.5 × 656 mm

(23-15/32 × 12-11/16 × 25-13/16 inches)

Weight*:

Approximately 8.7 kg (19.2 lbs)

Applicable projector:

PT-DZ13K/DS12K/DW11K/DZ10K/DZ8700/DS8500/

DW8300/DZ110X/DS100X/DW90X

Illustration shows the frame attached to a projector.

Parts

Frame (already assembled) . . . . . . . . . . . . . . . . . 1

Washer-fitted hexagonal bolts (M6 × 16)

. . . . . . 5

Spring washers (M10) . . . . . . . . . . . . . . . . . . . . . 8

Hex bolts (M10 × 110)

. . . . . . . . . . . . . . . . . . . . 4

Washers (M10)

. . . . . . . . . . . . . . . . . . . . . . . . . 16

Hexagonal nuts (M6) . . . . . . . . . . . . . . . . . . . . . . 8

Adjustment nuts (M10)

. . . . . . . . . . . . . . . . . . . . 4

* Average value. May differ depending on the actual unit.

unit : mm (inch)

NOTE: This illustration is not drawn to scale.

Dimensions

Description

This frame is designed especially for use on the Panasonic’s applicable projector. The frame can also be used for a

dual stack configuration in which two projectors are used together.

C a u t i o n :

•

Mounting should be done by a qualified technician.

•

Make sure that the mounting (ceiling) area has sufficient strength.

•

Read the enclosed mounting instructions thoroughly before starting.

•

Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque

wrench and tighten screws to the torque specified in the instructions.

•

When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.

Weights and dimensions shown are approximate. Specifications subject to change without notice.