If Military/Aerospace specified devices are required,

please contact the National Semiconductor Sales Office/

Distributors for availability and specifications.

Total Supply Voltage

36V

Output to Negative Supply Voltage

36V

Ground to Negative Supply Voltage

25V

Ground to Positive Supply Voltage

18V

Differential Input Voltage

Input Voltage (Note 2)

ESD rating (1.5 k

Ω in series with

100 pF)

800V

Power Dissipation (Note 3)

500 mW

Output Short Circuit Duration

10 sec

Storage Temperature Range

−65˚C to 150˚C

Lead Temperature

(Soldering, 10 sec.)

260˚C

Soldering Information

Dual-In-Line Package

Soldering (10 seconds)

260˚C

Small Outline Package

Vapor Phase (60 seconds)

215˚C

Infrared (15 seconds)

220˚C

See AN-450 “Surface Mounting Methods and Their Effect

on Product Reliability” for other methods of soldering

surface mount devices.

Operating Temperature Range

LM119

−55˚C to 125˚C

LM219

−25˚C to 85˚C

Parameter

Conditions

LM119/LM219

Units

Min

Typ

Max

Input Offset Voltage (Note 5)

T

0.7

4.0

mV

Input Offset Current (Note 5)

T

30

75

nA

Input Bias Current

T

150

500

nA

Voltage Gain

T

10

40

V/mV

Response Time (Note 6)

T

80

ns

Saturation Voltage

V

T

0.75

1.5

V

Output Leakage Current

V

T

0.2

2

µA

Input Offset Voltage (Note 5)

R

7

mV

Input Offset Current (Note 5)

100

nA

Input Bias Current

1000

nA

Input Voltage Range

V

−12

+12

V

V

3

V

Saturation Voltage

V

+

V

T

0.23

0.4

V

T

0.6

V

Output Leakage Current

V

1

10

µA

V

Differential Input Voltage

Positive Supply Current

T

4.3

mA

Positive Supply Current

T

8

11.5

mA

Negative Supply Current

T

3

4.5

mA

Note 3: The maximum junction temperature of the LM119 is 150˚C, while that of the LM219 is 110˚C. For operating at elevated temperatures, devices in the H10

package must be derated based on a thermal resistance of 160˚C/W, junction to ambient, or 19˚C/W, junction to case. The thermal resistance of the J14 and N14

packages is 100˚C/W, junction to ambient.

temperature specifications are limited to −25˚C

Note 5: The offset voltages and offset currents given are the maximum values required to drive the output within a volt of either supply witha1mA load. Thus, these

parameters define an error band and take into account the worst case effects of voltage gain and input impedance.

Note 6: The response time specified (see definitions) is for a 100 mV input step with 5 mV overdrive.

Note 7: Output is pulled up to 15V through a 1.4 k

Ω resistor.

Note 8: Refer to RETS119X for LM119H/883 and LM119J/883 specifications.

www.national.com

2