5

Technical Data 1157

Effective March 2016

Compact Circuit Protector (CCP)

UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm

fused disconnect switches

Eaton.com/bussmannseries

1-, 2- and 3-Pole — Class CF

Description:

The revolutionary Bussmann series

Compact Circuit Protector (CCP) fused

disconnect switch with CUBEFuse™is 2/3

the footprint of a traditional fusible switch

and provides a high 200kA SCCR that can

help increase assembly SCCR .

Specifications:

Ratings

Volts

•

600Vac

•

125Vdc (up to 80A max)

Amps

•

30, 60, 100A

SCCR

•

200kA AC

•

100kA DC (up to 80A max)

Poles

•

1-, 2-, 3-pole

Agency information

•

UL 98 Listed, File E302370, Guide WHTY

•

cULus to CSA Standard 22 .2 No . 4-04, File 302370,

Guide WHTY7

•

CE

•

RoHS compliant

Conductors 75°C Cu or higher

•

30 to 60A CCPs: - Single/dual 18-6AWG solid or stranded

- Single 4AWG solid or stranded

•

100A CCPs

- Single 10-8AWG solid

- Single 8-1AWG stranded

- Dual 6AWG stranded

Terminals

•

Single/dual conductor box lug or fork terminal suitable for line,

load or accessory connection

•

Torque: 0-60A:

- 18-10AWG 20 Lb-In

- 8-6AWG 35Lb-In

- 4AWG 35 Lb-In

70-100A: - 18-10AWG single 25 Lb-In

- 8-1AWG single 40 Lb-In

- 6AWG dual 45 Lb-In

Fuses

•

Uses finger-safe Class CF Bussmann series CUBEFuse with

Class J performance

•

Bussmann series Low-Peak™ dual-element, time-delay*

•

Non-indicating 1-100A

•

Indicating 6-100A

•

Fast-acting, non-indicating 1-100A**

* See data sheet No . 9000 .

**See data sheet No . 2147.

Storage and operating temperature

•

-20°C to 75°C***

*** For fuse performance under or above 25°C, consult fuse performance

derating charts in the Bussmann Division publication titled Selecting

Protective Devices (SPD) No . 3002 .

Flammability rating

•

UL 94V0

Lockout/tagout provisions

•

4mm shank lock

Mounting

•

35mm DIN-Rail

•

90V

† Open fuse indication requires an open fuse to be in the CCP and the switch

in the ON position .

Accessories

•

Auxiliary contacts

•

PLC wired remote fuse indication

•

Bussmann series CUBEFuse fuse pullers (P/Ns: CFP-30,

CFP-60, CFP-100)

Shipping weight

•

2 .03 lbs (0 .92kg) per carton

Carton quantity

•

Six (6) poles

Features:

•

Uses Class CF finger-safe fast-acting and time-delay

CUBEFuse with Class J electrical performance

•

Extremely compact design at 25 .4mm (1 inch) wide per pole

•

Ampacity rejecting disconnects will not accept Bussmann

series CUBEFuse amp ratings greater than switch rating

•

High Short-Circuit Current Ratings at 200kA

•

Disconnect rated to provide means for load isolation

•

Full voltage rated at 600Vac

•

125Vdc rated up to 80A max

•

UL 98 Listed and suitable for branch circuit disconnect and

branch circuit protection

•

1-, 2- and 3-pole versions are horsepower rated

•

Complies with UL and CSA

•

Open fuse indication:

•

Local fuse indication lights are standard

•

Optional wired remote open fuse indication can be utilized

to signal a PLC and open a contactor to de-energize all

phases, if required

•

Additional open fuse indication can be provided by the

Bussmann series CUBEFuse

•

larger

•

Built-in switch interlock capability prohibits removing the fuse

under load

•

Padlockable handle for lockout/tagout procedures