©2015 Glenair, Inc.

REV: 2

US Cage Code 06324

Printed in USA

GLENAIR, INC.

∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497

∙ TEL: 818-247-6000

∙ FAX: 818-500-9912

www.glenair.com

PAGE 11 of 16

E-mail: sales@glenair.com

050-356 Product Brief

PCB Mount CWDM Dual-Transmitter

100 Mbps – 2.5 Gbps SMF, 3.3V

Fiber Compatibility

The transceiver is capable of transmission up to 10km with 9

/125 μm fiber at 1.25Gbps data rate.

Electrostatic Discharge (ESD)

The Transceiver is compatible with ESD levels found in typical manufacturing and operating environments as described

JEDEC EIA JESD22-A114-A, Class 1 (<2000Volts) HBM. Glenair recommends that devices are handled with ESD

precautions to limit exposure to below 500V HBM.

There are two design cases in which immunity to ESD damage is important. The first case is during handling of the

transceiver prior to insertion to the host board. To protect the transceiver, it’s important to use standard industry ESD

handling precautions. These precautions include using grounded wrist straps, work benches, and floor mats in ESD

controlled areas. The ESD sensitivity of the Glenair PCB mount transceiver is compatible with typical industry production

environments.

The second case to consider is static discharges to the exterior of the host equipment after installation, in which case the

transceiver may be subject to system-level ESD requirements.

Application Support