![]() |
Electronic Components Datasheet Search |
|
M37274EFSP Datasheet(PDF) 7 Page - Mitsubishi Electric Semiconductor |
|
|
M37274EFSP Datasheet(HTML) 7 Page - Mitsubishi Electric Semiconductor |
7 / 147 page ![]() 7 SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER M37274EFSP PRELIMINARY Notice: This is not a final specification. Some paramentic limits are subject to change. MITSUBISHI MICROCOMPUTERS Ports P63 and P64 are 2-bit input port. Pin P63 is also used as OSD clock input pin OSC1. Pin P64 is also used as OSD clock output pin OSC2. The output structure is CMOS output. Pin P64 is also used as sub-clock output pin XCOUT. The output structure is CMOS output. Pin P63 is also used as sub-clock input pin XCIN. Ports P70–P72 are 3-bit input port. Pins P70, P71 are also used as data slicer input pins CVIN, VHOLD respectively. When using data slicer, input composite video signal through a capacitor. Connect a capacitor between VHOLD and VSS. Pins P72 pin is also used as input/output pin for data slicer RVCO. When using data slicer, connect a resistor between RVCO and VSS. When using data slicer, connect a filter using of a capacitor and a resistor between HLF and VSS. This is a horizontal synchronous signal input for OSD. This is a vertical synchronous signal input for OSD. PIN DESCRIPTION (continued) Note : As shown in the memory map (Figure 5), port P0 is accessed as a memory at address 00C016 of zero page. Port P0 has the port P0 direction register (address 00C116 of zero page) which can be used to program each bit as an input (“0”) or an output (“1”). The pins programmed as “1” in the direction register are output pins. When pins are programmed as “0,” they are input pins. When pins are programmed as output pins, the output data are written into the port latch and then output. When data is read from the output pins, the output pin level is not read but the data of the port latch is read. This allows a previously-output value to be read correctly even if the output “L” voltage has risen, for example, because a light emitting diode was directly driven. The input pins float, so the values of the pins can be read. When data is written into the input pin, it is written only into the port latch, while the pin remains in the floating state. Pin Name Functions Input/ Output Analog input Input This is an analog input pin AD6. I/O Input/output for data slicer P63/OSC1/ XCIN, P64/OSC2/ XCOUT P70/CVIN, P71/VHOLD, P72/RVCO HLF/AD6 HSYNC VSYNC Input port Clock input for OSD Clock output for OSD Sub-clock output Sub-clock input Input port P7 Input for data slicer HSYNC input VSYNC input Input Input Output Output Input Input Input Input Input |
Similar Part No. - M37274EFSP |
|
Similar Description - M37274EFSP |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |