10

PALCE22V10H-7 (Com’l)

ABSOLUTE MAXIMUM RATINGS

Storage Temperature . . . . . . . . . . . . . .-65°C to +150°C

Ambient Temperature with

Power Applied . . . . . . . . . . . . . . . . . .-55°C to +125°C

Supply Voltage with Respect

to Ground . . . . . . . . . . . . . . . . . . . . . -0.5 V to +7.0 V

Static Discharge Voltage . . . . . . . . . . . . . . . . . 2001 V

Stresses above those listed under Absolute Maximum Ratings

may cause permanent device failure. Functionality at or above

these limits is not implied. Exposure to Absolute Maximum

Ratings for extended periods may affect device reliability.

Programming conditions may vary.

OPERATING RANGES

Commercial (C) Devices

Operating in Free Air . . . . . . . . . . . . . . . 0°C to +75°C

Respect to Ground. . . . . . . . . . . . . +4.75 V to +5.25 V

Operating ranges define those limits between which the func-

tionality of the device is guaranteed.

Notes:

1. These are absolute values with respect to the device ground, and all overshoots due to system and tester noise are included.

2. I/O pin leakage is the worst case of IIL and IOZL (or IIH and IOZH).

3. Not more than one output should be tested at a time. Duration of the short-circuit test should not exceed one second.

VOUT = 0.5 V has been chosen to avoid test problems caused by tester ground degradation.

DC CHARACTERISTICS OVER COMMERCIAL OPERATING RANGES

Symbol

Parameter Description

Test Conditions

Min

Max

Unit

Output HIGH Voltage

IOH = -3.2 mA, VIN = VIH or VIL, VCC = Min

2.4

V

Output LOW Voltage

IOL = 16 mA, VIN = VIH or VIL, VCC = Min

0.4

V

Input HIGH Voltage

Guaranteed Input Logical HIGH

Voltage for all Inputs (Note 1)

2.0

V

Input LOW Voltage

Guaranteed Input Logical LOW

Voltage for all Inputs (Note 1)

0.8

V

Input HIGH Leakage Current

VIN = VCC, VCC = Max (Note 2)

10

µ

A

Input LOW Leakage Current

VIN = 0 V, VCC = Max (Note 2)

-100

µ

A

Off-State Output Leakage

Current HIGH

VOUT = VCC, VCC = Max, VIN = VIL or VIH (Note 2)

10

µ

A

Off-State Output Leakage

Current LOW

VOUT = 0 V, VCC = Max, VIN = VIL or VIH (Note 2)

-100

µ

A

Output Short-Circuit

Current

VOUT = 0.5 V, VCC = Max

TA = 25°C (Note 3)

-30

-130

mA

Supply Current

Outputs Open, (IOUT = 0 mA), VCC = Max

115

mA

140

mA