Electronic Components Datasheet Search |
|
ADV101 Datasheet(PDF) 7 Page - Analog Devices |
|
|
ADV101 Datasheet(HTML) 7 Page - Analog Devices |
7 / 12 page ADV101 –7– REV. B If we, therefore, have a graphics system with a 1024 × 1024 resolution, a noninterlaced 60 Hz refresh rate and a retrace fac- tor of 0.8, then: Dot Rate = 1024 × 1024 × 60/0.8 Dot Rate = 78.6 MHz Video Synchronization and Control The ADV101 has a single composite video sync (SYNC) input control. Many graphics processors and CRT controllers have the ability of generating horizontal sync (HSYNC), vertical sync (VSYNC) and composite SYNC. In a graphics system which does not automatically generate a composite SYNC signal, the inclusion of some additional logic circuitry will enable the generation of a composite SYNC signal. The ISYNC current output is typically connected directly to the IOG output, thus encoding video synchronization information onto the green video channel. If it is not required to encode sync information onto the ADV101, the SYNC input should be tied to logic low and ISYNC should be connected to analog GND. Reference Input An external 1.23 V voltage reference is required to drive the ADV101. The AD589 from Analog Devices is an ideal choice of reference. It is a two-terminal, low cost, temperature compen- sated bandgap voltage reference which provides a fixed 1.23 V output voltage for input currents between 50 µA and 5 mA. Fig- ure 4 shows a typical reference circuit connection diagram. The voltage reference gets its current drive from the ADV101’s VAA through an external 1 k Ω resistor to the V REF pin. A 0.1 µF ce- ramic capacitor is required between the COMP and VAA. This is necessary so as to provide compensation for the internal refer- ence amplifier. The required CLOCK frequency is thus 78.6 MHz. All video data and control inputs are latched into the ADV101 on the rising edge of CLOCK, as previously described in the “Digital Inputs” section. It is recommended that the CLOCK input to the ADV101 be driven by a TTL buffer (e.g., 74F244). Table I. Video Output Truth Table IOG IOR, IOB REF DAC Description (mA) 1 (mA) WHITE SYNC BLANK Input Data WHITE LEVEL 26.67 19.05 1 1 1 xxH WHITE LEVEL 26.67 19.05 0 1 1 FFH VIDEO video + 9.05 video + 1.44 0 1 1 data VIDEO to BLANK video + 1.44 video + 1.44 0 0 1 data BLACK LEVEL 9.05 1.44 0 1 1 00H BLACK to BLANK 1.44 1.44 0 0 1 00H BLANK LEVEL 7.62 0 0 1 0 xxH SYNC LEVEL 0 0 0 0 0 xxH NOTE 1Typical with full-scale IOG = 26.67 mA. V REF = 1.235 V, RSET = 560 Ω, ISYNC connected to IOG. 92.5 IRE 7.5 IRE 40 IRE WHITE LEVEL BLACK LEVEL BLANK LEVEL SYNC LEVEL 19.05 0.714 26.67 1.000 1.44 0.054 9.05 0.340 0 0 7.62 0.286 0 0 mA V mA V RED, BLUE GREEN NOTES 1. OUTPUTS CONNECTED TO A DOUBLY TERMINATED 75 Ω LOAD. 2. V = 1.235V, R = 560 Ω, I CONNECTED TO IOG. REF SET SYNC 3. RS-343A LEVELS AND TOLERANCES ASSUMED ON ALL LEVELS. Figure 3. RGB Video Output Waveform OBSOLETE |
Similar Part No. - ADV101_15 |
|
Similar Description - ADV101_15 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |