Document Number: 28124

www.vishay.com

Revision: 19-Mar-13

201

MMKP 383

AC and Pulse Double Metallized Polypropylene

Film Capacitors MMKP Radial Potted Type

Vishay BCcomponents

This document is subject to change without notice.

Not Recommended for New Design, Use New MMKP383

MOUNTING

Normal Use

The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for

mounting on printed-circuit boards by means of automatic insertion machines

.

Specific Method of Mounting to Withstand Vibration and Shock

In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the

printed-circuit board:

15 mmthe capacitors shall be mechanically fixed by the leads

Space Requirements on Printed-Circuit Board

The maximum length and width of film capacitors is shown in the drawing:

Storage Temperature

 Storage temperature: T

Ratings and Characteristics Reference Conditions

Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C ± 1 °C, an atmospheric pressure

of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.

For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at

the rated temperature and a relative humidity not exceeding 20 %.

Eccentricity

I

b