Electronic Components Datasheet Search |
|
ADA4666-2 Datasheet(PDF) 24 Page - Analog Devices |
|
ADA4666-2 Datasheet(HTML) 24 Page - Analog Devices |
24 / 32 page ADA4666-2 Data Sheet Rev. 0 | Page 24 of 32 COMPARATOR OPERATION An op amp is designed to operate in a closed-loop configuration with feedback from its output to its inverting input. Figure 73 shows the ADA4666-2 configured as a voltage follower with an input voltage that is always kept at the midpoint of the power supplies. The same configuration is applied to the unused channel. A1 and A2 indicate the placement of ammeters to measure supply current. ISY+ refers to the current flowing from the upper supply rail to the op amp, and ISY− refers to the current flowing from the op amp to the lower supply rail. As shown in Figure 74, in normal operating conditions, the total current flowing into the op amp is equivalent to the total current flowing out of the op amp, where ISY+ = ISY− = 630 μA per amplifier at VSY = 18 V. Figure 73. Voltage Follower Figure 74. Supply Current vs. Supply Voltage (Voltage Follower) In contrast to op amps, comparators are designed to work in an open-loop configuration and to drive logic circuits. Although op amps are different from comparators, occasionally an unused section of a dual op amp is used as a comparator to save board space and cost; however, this is not recommended for the ADA4666-2. Figure 75 and Figure 76 show the ADA4666-2 configured as a comparator, with 100 kΩ resistors in series with the input pins. Any unused channels are configured as buffers with the input voltage kept at the midpoint of the power supplies. Figure 75. Comparator A Figure 76. Comparator B Figure 77 shows the supply currents for both comparator configurations. In comparator mode, the ADA4666-2 does not power up completely. For more information about configuring using op amps as comparators, see the AN-849 Application Note, Using Op Amps as Comparators. Figure 77. Supply Current vs. Supply Voltage (ADA4666-2 as a Comparator) ADA4666-2 1/2 A1 100kΩ 100kΩ ISY+ +VSY VOUT –VSY ISY– A2 0 100 200 300 400 500 600 700 0 2 4 6 8 10 12 14 16 18 VSY (V) A1 100kΩ 100kΩ ISY+ +VSY VOUT –VSY ISY– A2 ADA4666-2 1/2 A1 100kΩ 100kΩ ISY+ +VSY VOUT –VSY ISY– A2 ADA4666-2 1/2 0 100 200 300 400 500 600 700 0 2 4 6 8 10 12 14 16 18 VSY (V) COMPARATOR A COMPARATOR B |
Similar Part No. - ADA4666-2 |
|
Similar Description - ADA4666-2 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |