BT730 Series

Class 1 Bluetooth v2.0 Module

USA: +1.800.492.2320

Europe: +44.1628.858.940

Asia: +852.2923.0610

wirelessinfo@lairdtech.com

www.lairdtech.com/bluetooth

Every BT730 series Bluetooth

robust, long-range Bluetooth data connectivity to any device. Based on the

market-leading Cambridge Silicon Radio (CSR) BC04 chipset, BT730 modules

provide exceptionally low power consumption with outstanding Class 1 range via

18 dBm of transmit power. A broad range of Bluetooth profiles such as Serial Port

Profile (SPP) and other vital features make BT730 modules superior to other

Bluetooth modules.

With a compact footprint of 15.29 x 28.71 mm, the modules deliver maximum

range with a minimum size. Another integration advantage is the inclusion of a

complete Bluetooth v2.0 protocol stack with support for multi-point connections

and numerous Bluetooth profiles, including Serial Port Profile (SPP), Dial Up

Networking (DUN), FTP Client plus partial support for Headset (HSP), and

HandsFree (HFP). BT730 modules are fully qualified as a Bluetooth End Products,

enabling designers to integrate the modules in devices without the need for

further Bluetooth Qualification.

An integrated AT command processor interfaces to the host system over a serial

port using an extensive range of AT commands. The AT command set abstracts

the Bluetooth protocol from the host application, saving many months of

programming and integration time. It provides extremely short integration times

for data oriented Bluetooth applications.

Included firmware provides programming support for multi-point applications that

use up to three simultaneous data connections to and from the robust BT730

module. A low-cost developer’s kit makes it easy for an OEM to integrate the

module and guarantees the fastest route to prototype and then mass production.

Features & Benefits

Application Areas



Bluetooth v2.0



External or Internal Antennas



Comprehensive AT command set



Bluetooth EPL



Compact Footprint



Class 1 output - 18dBm



UART interface with GPIO,

PCM & ADC lines



Industrial Temperature range



Field Proven firmware used on

BTM40x and BISM II product ranges



Medical devices



ePOS terminals



Automotive Diagnostic

Equipment



Barcode Scanners



Industrial Cable

Replacement

Full detailed product documentation is available at:

http://www.lairdtech.com/Products/Embedded-Wireless-Solutions/Bluetooth-Radio-

Modules/BT700-Series/BT730/

The details contained within the document are subject to change.