WM71004-6-NF1 – 4Kb Wireless Memory Inlay

Rev. 0.1

Sept 2011

Page 2 of 3

MECHANICAL DRAWINGS

Notes:

1.

Conductor side of antenna is shown face up.

2.

In-Progression image requirement = 21 antenna rows. Tolerance ±0.3mm between prints.

3.

Core Length: 74.2 ±3.8mm (2.9” ± 0.15”)

4.

Core ID: 76.97 ±0.25mm (3.00” ±0.125”)

5.

Core wall thickness: 3.18 +3.0/-0.0 mm (0.125” +0.12/-0.00”)

6.

Antenna conductor unwinds facing toward core

7.

Smallest Antenna feature .0.076mm (0.003”)

SHIPMENT DETAILS

WM71004-6-NF1 parts will be cut from the roll unless a complete roll is ordered (WM71004-6-NF1-Roll).

Some inlays on the roll may not be functional. These will be indicated with a red ink dot beside the faulty

inlay.