For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

8

8 - 6

The circuit board used in the application should

use RF circuit design techniques. Signal lines

should have 50 Ohm impedance while the package

ground leads and backside ground paddle should

be connected directly to the ground plane similar to

that shown. A sufficient number of via holes should

be used to connect the top and bottom ground

planes. The evaluation circuit board shown is avail-

able from Hittite upon request.

Evaluation PCB

Item

Description

J1 - J4

PCB Mount SMA RF Connector

J5 - J6

2 mm DC Header

C1 - C3

100 pF Capacitor, 0402 Pkg.

C4

1,000 pF Capacitor, 0402 Pkg.

C5 - C7

2.2 µF Tantalum Capacitor

U1

HMC735LP5(E) VCO

110225 Eval Board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350 or Arlon 25FR

HMC735LP5 / 735LP5E

v03.0609

MMIC VCO w/ DIVIDE-BY-4

10.5 - 12.2 GHz